Ian Chilton wrote:
> I booed 2.4.19 with HPT366 compiled in and i have not got it to fall
> over yet :)
>
> HPT366: onboard version of chipset, pin1=1 pin2=2
> HPT366: IDE controller on PCI bus 00 dev 98
> HPT366: chipset revision 1
> HPT366: not 100% native mode: will probe irqs later
> ide0: BM-DMA at 0xb400-0xb407, BIOS settings: hda:DMA, hdb:pio
> HPT366: IDE controller on PCI bus 00 dev 99
> HPT366: chipset revision 1
> HPT366: not 100% native mode: will probe irqs later
> ide1: BM-DMA at 0xc000-0xc007, BIOS settings: hdc:pio, hdd:pio
> hda: IBM-DTLA-307045, ATA DISK drive
> ide0 at 0xac00-0xac07,0xb002 on irq 15
> hda: 90069840 sectors (46116 MB) w/1916KiB Cache, CHS=89355/16/63,
> UDMA(44)
Your IBM-DTLA-307045 is on ATA100 and ATA66 bad_drives lists and is properly
downgraded to UDMA3. Mine however (IC35L040AVER07-0), despite also being
present on those lists, is recognized as UDMA5 by hpt366.c newer than 0.18.
That may be the culprit.
Cheers,
Milek
--
mailto:thorgal@wfmh.org.pl | "Man in the Moon and other weird things" -
http://wfmh.org.pl/~thorgal/ | see it at http://wfmh.org.pl/~thorgal/Moon/
PLEASE UPDATE YOUR ADDRESSBOOK WITH MY NEW EMAIL ADDRESS.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/