> i had similar issues on my old 2460 board.
>
> i found out that a huge power supply doesn't cut it, you need a QUALITY
> power supply of ~400watts( more specifically the 5 volt bus).
>
> i also found out the hard way that i believe tyan didn't design that board
> properly because the 5 volt part of the connectors were burned up on the PS
> and MB.
>
> i've since replaced with a s2466n-4m and am very happy.
>
> i'd check your power supply connector before it burns up yours too...
PSU connector is fine... and I definitely need the extra juice since I'm
running quite a bit of power hungry hardware in this box (5 SCSI drives, a
GF4, etc). Both power supplies are pretty good Antecs. It does bother me
that they didn't use the AUX connector for the extra 5V power though
--
Ken Witherow <phantoml AT rochester.rr.com>
ICQ: 21840670 AIM: phantomlordken
http://www.krwtech.com/ken
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/