Re: [Serial 2.5]: packet drop problem (FE ?)

[Jean Tourrilhes]

On Fri, Nov 08, 2002 at 12:49:24AM +0000, Russell King wrote:
> On Thu, Nov 07, 2002 at 04:41:55PM -0800, Jean Tourrilhes wrote:
> > 	Is there a way to see the current flag configuration of the
> > port with setserial or /proc ?
> 
> stty -a -F /dev/ttySx
> 
> should do the trick.

	2.5.X :
-----------------------------------
speed 9600 baud; rows 0; columns 0; line = 11;
intr = ^C; quit = ^\; erase = ^?; kill = ^U; eof = ^D; eol = <undef>;
eol2 = <undef>; start = ^Q; stop = ^S; susp = ^Z; rprnt = ^R; werase = ^W;
lnext = ^V; flush = ^O; min = 1; time = 0;
-parenb -parodd cs8 -hupcl -cstopb cread clocal -crtscts
ignbrk -brkint ignpar -parmrk -inpck -istrip -inlcr -igncr -icrnl -ixon -ixoff
-iuclc -ixany -imaxbel
-opost -olcuc -ocrnl -onlcr -onocr -onlret -ofill -ofdel nl0 cr0 tab0 bs0 vt0
ff0
-isig -icanon -iexten -echo -echoe -echok -echonl -noflsh -xcase -tostop
-echoprt -echoctl -echoke
-----------------------------------

	2.4.X :
-------------------------
speed 9600 baud; rows 0; columns 0; line = 11;
intr = ^C; quit = ^\; erase = ^?; kill = ^U; eof = ^D; eol = <undef>;
eol2 = <undef>; start = ^Q; stop = ^S; susp = ^Z; rprnt = ^R; werase = ^W;
lnext = ^V; flush = ^O; min = 1; time = 0;
-parenb -parodd cs8 -hupcl -cstopb cread clocal -crtscts
ignbrk -brkint ignpar -parmrk -inpck -istrip -inlcr -igncr -icrnl -ixon -ixoff
-iuclc -ixany -imaxbel
-opost -olcuc -ocrnl -onlcr -onocr -onlret -ofill -ofdel nl0 cr0 tab0 bs0 vt0
ff0
-isig -icanon -iexten -echo -echoe -echok -echonl -noflsh -xcase -tostop
-echoprt -echoctl -echoke
-------------------------

	I'll try to dig further. It might be the hardware...

	Jean