/var/log/boot.msg
--- snip ---
<6>SCSI subsystem driver Revision: 1.00
<6>scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.8
<4> <Adaptec 3960D Ultra160 SCSI adapter>
<4> aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
<4>
<6>scsi1 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.8
<4> <Adaptec 3960D Ultra160 SCSI adapter>
<4> aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253 SCBs
<4>
<4> Vendor: PIONEER Model: DVD-ROM DVD-303 Rev: 1.09
<4> Type: CD-ROM ANSI SCSI revision: 02
<4> Vendor: HP Model: C1537A Rev: L812
<4> Type: Sequential-Access ANSI SCSI revision: 02
<4> Vendor: FUJITSU Model: MAN3184MP Rev: 0108
<4> Type: Direct-Access ANSI SCSI revision: 03
<4> Vendor: FUJITSU Model: MAN3184MP Rev: 0108
<4> Type: Direct-Access ANSI SCSI revision: 03
<4>scsi1:A:0:0: Tagged Queuing enabled. Depth 32
<4>scsi1:A:1:0: Tagged Queuing enabled. Depth 32
<6>st: Version 20020205, bufsize 32768, wrt 30720, max init. bufs 4, s/g
segs 16
<4>Attached scsi tape st0 at scsi0, channel 0, id 5, lun 0
<4>sd: allocated major 8
<7>sd: find_free_slot ...<7>sd: ... found 08:00
<4>Attached scsi disk sda at scsi1, channel 0, id 0, lun 0
<7>sd: find_free_slot ...<7>sd: ... found 08:10
<4>Attached scsi disk sdb at scsi1, channel 0, id 1, lun 0
<4>(scsi1:A:0): 80.000MB/s transfers (40.000MHz, offset 127, 16bit)
<4>SCSI device sda: 35885448 512-byte hdwr sectors (18373 MB)
<6>Partition check:
<6> sda: sda1 sda2
<4>(scsi1:A:1): 80.000MB/s transfers (40.000MHz, offset 127, 16bit)
<4>SCSI device sdb: 35885448 512-byte hdwr sectors (18373 MB)
--- end snip ---
/proc/scsi/aic7xxx/1
-- snip ---
Adaptec AIC7xxx driver version: 6.2.8
aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253 SCBs
Serial EEPROM:
0x433a 0x433a 0x433a 0x433a 0x433a 0x433a 0x433a 0xc33a
0x433a 0x433a 0x433a 0x433a 0xc33a 0xc33a 0xc33a 0xc33a
0x0074 0x605d 0x2807 0x0010 0x0300 0xffff 0xffff 0xffff
0xffff 0xffff 0xffff 0xffff 0xffff 0xffff 0x0250 0x41cf
Channel A Target 0 Negotiation Settings
User: 160.000MB/s transfers (80.000MHz DT, offset 255, 16bit)
Goal: 80.000MB/s transfers (40.000MHz, offset 127, 16bit)
Curr: 80.000MB/s transfers (40.000MHz, offset 127, 16bit)
Channel A Target 0 Lun 0 Settings
Commands Queued 4554
Commands Active 0
Command Openings 32
Max Tagged Openings 32
Device Queue Frozen Count 0
Channel A Target 1 Negotiation Settings
User: 160.000MB/s transfers (80.000MHz DT, offset 255, 16bit)
Goal: 80.000MB/s transfers (40.000MHz, offset 127, 16bit)
Curr: 80.000MB/s transfers (40.000MHz, offset 127, 16bit)
Channel A Target 1 Lun 0 Settings
Commands Queued 56
Commands Active 0
Command Openings 32
Max Tagged Openings 32
Device Queue Frozen Count 0
--- end snip ---
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/