[PATCH] NCR53C9x ESP: C99 designated initializers

Geert Uytterhoeven (geert@linux-m68k.org)
Sun, 3 Nov 2002 11:46:48 +0100

Messages sorted by: [ date ][ thread ][ subject ][ author ]
Next message: Keith Owens: "Re: kbuild: Compatible with old bash, fix help, make clean fix"
Previous message: Geert Uytterhoeven: "[PATCH] NCR53C9x ESP updates"
Next in thread: Christoph Hellwig: "Re: [PATCH] NCR53C9x ESP: C99 designated initializers"
Reply: Christoph Hellwig: "Re: [PATCH] NCR53C9x ESP: C99 designated initializers"

NCR53C9x ESP: C99 designated initializers

--- linux-2.5.45/drivers/scsi/blz1230.h Fri Nov 1 12:49:23 2002
+++ linux-m68k-2.5.45/drivers/scsi/blz1230.h Sun Nov 3 10:58:48 2002
@@ -57,19 +57,21 @@
extern int esp_proc_info(char *buffer, char **start, off_t offset, int length,
int hostno, int inout);

-#define SCSI_BLZ1230 { proc_name: "esp-blz1230", \
- proc_info: esp_proc_info, \
- name: "Blizzard1230 SCSI IV", \
- detect: blz1230_esp_detect, \
- release: blz1230_esp_release, \
- command: esp_command, \
- queuecommand: esp_queue, \
- eh_abort_handler: esp_abort, \
- eh_bus_reset_handler: esp_reset, \
- can_queue: 7, \
- this_id: 7, \
- sg_tablesize: SG_ALL, \
- cmd_per_lun: 1, \
- use_clustering: ENABLE_CLUSTERING }
+#define SCSI_BLZ1230 { \
+ .proc_name = "esp-blz1230", \
+ .proc_info = esp_proc_info, \
+ .name = "Blizzard1230 SCSI IV", \
+ .detect = blz1230_esp_detect, \
+ .release = blz1230_esp_release, \
+ .command = esp_command, \
+ .queuecommand = esp_queue, \
+ .eh_abort_handler = esp_abort, \
+ .eh_bus_reset_handler = esp_reset, \
+ .can_queue = 7, \
+ .this_id = 7, \
+ .sg_tablesize = SG_ALL, \
+ .cmd_per_lun = 1, \
+ .use_clustering = ENABLE_CLUSTERING \
+}

#endif /* BLZ1230_H */
--- linux-2.5.45/drivers/scsi/blz2060.h Fri Nov 1 12:49:23 2002
+++ linux-m68k-2.5.45/drivers/scsi/blz2060.h Sun Nov 3 10:59:03 2002
@@ -53,18 +53,20 @@
extern int esp_proc_info(char *buffer, char **start, off_t offset, int length,
int hostno, int inout);

-#define SCSI_BLZ2060 { proc_name: "esp-blz2060", \
- proc_info: esp_proc_info, \
- name: "Blizzard2060 SCSI", \
- detect: blz2060_esp_detect, \
- release: blz2060_esp_release, \
- queuecommand: esp_queue, \
- eh_abort_handler: esp_abort, \
- eh_bus_reset_handler: esp_reset, \
- can_queue: 7, \
- this_id: 7, \
- sg_tablesize: SG_ALL, \
- cmd_per_lun: 1, \
- use_clustering: ENABLE_CLUSTERING }
+#define SCSI_BLZ2060 { \
+ .proc_name = "esp-blz2060", \
+ .proc_info = esp_proc_info, \
+ .name = "Blizzard2060 SCSI", \
+ .detect = blz2060_esp_detect, \
+ .release = blz2060_esp_release, \
+ .queuecommand = esp_queue, \
+ .eh_abort_handler = esp_abort, \
+ .eh_bus_reset_handler = esp_reset, \
+ .can_queue = 7, \
+ .this_id = 7, \
+ .sg_tablesize = SG_ALL, \
+ .cmd_per_lun = 1, \
+ .use_clustering = ENABLE_CLUSTERING \
+}

#endif /* BLZ2060_H */
--- linux-2.5.45/drivers/scsi/cyberstorm.h Fri Nov 1 12:49:23 2002
+++ linux-m68k-2.5.45/drivers/scsi/cyberstorm.h Sun Nov 3 10:59:23 2002
@@ -56,18 +56,20 @@
int hostno, int inout);

-#define SCSI_CYBERSTORM { proc_name: "esp-cyberstorm", \
- proc_info: esp_proc_info, \
- name: "CyberStorm SCSI", \
- detect: cyber_esp_detect, \
- release: cyber_esp_release, \
- queuecommand: esp_queue, \
- eh_abort_handler: esp_abort, \
- eh_bus_reset_handler: esp_reset, \
- can_queue: 7, \
- this_id: 7, \
- sg_tablesize: SG_ALL, \
- cmd_per_lun: 1, \
- use_clustering: ENABLE_CLUSTERING }
+#define SCSI_CYBERSTORM { \
+ .proc_name = "esp-cyberstorm", \
+ .proc_info = esp_proc_info, \
+ .name = "CyberStorm SCSI", \
+ .detect = cyber_esp_detect, \
+ .release = cyber_esp_release, \
+ .queuecommand = esp_queue, \
+ .eh_abort_handler = esp_abort, \
+ .eh_bus_reset_handler = esp_reset, \
+ .can_queue = 7, \
+ .this_id = 7, \
+ .sg_tablesize = SG_ALL, \
+ .cmd_per_lun = 1, \
+ .use_clustering = ENABLE_CLUSTERING \
+}

#endif /* CYBER_ESP_H */
--- linux-2.5.45/drivers/scsi/cyberstormII.h Fri Nov 1 12:49:23 2002
+++ linux-m68k-2.5.45/drivers/scsi/cyberstormII.h Sun Nov 3 10:59:38 2002
@@ -43,18 +43,20 @@
extern int esp_proc_info(char *buffer, char **start, off_t offset, int length,
int hostno, int inout);

-#define SCSI_CYBERSTORMII { proc_name: "esp-cyberstormII", \
- proc_info: esp_proc_info, \
- name: "CyberStorm Mk II SCSI", \
- detect: cyberII_esp_detect, \
- release: cyberII_esp_release, \
- queuecommand: esp_queue, \
- eh_abort_handler: esp_abort, \
- eh_bus_reset_handler: esp_reset, \
- can_queue: 7, \
- this_id: 7, \
- sg_tablesize: SG_ALL, \
- cmd_per_lun: 1, \
- use_clustering: ENABLE_CLUSTERING }
+#define SCSI_CYBERSTORMII { \
+ .proc_name = "esp-cyberstormII", \
+ .proc_info = esp_proc_info, \
+ .name = "CyberStorm Mk II SCSI", \
+ .detect = cyberII_esp_detect, \
+ .release = cyberII_esp_release, \
+ .queuecommand = esp_queue, \
+ .eh_abort_handler = esp_abort, \
+ .eh_bus_reset_handler = esp_reset, \
+ .can_queue = 7, \
+ .this_id = 7, \
+ .sg_tablesize = SG_ALL, \
+ .cmd_per_lun = 1, \
+ .use_clustering = ENABLE_CLUSTERING \
+}

#endif /* CYBERII_ESP_H */
--- linux-2.5.45/drivers/scsi/dec_esp.h Fri Nov 1 12:49:24 2002
+++ linux-m68k-2.5.45/drivers/scsi/dec_esp.h Sun Nov 3 11:00:01 2002
@@ -26,20 +26,21 @@
extern int esp_proc_info(char *buffer, char **start, off_t offset, int length,
int hostno, int inout);

-#define SCSI_DEC_ESP { \
- proc_name: "esp", \
- proc_info: &esp_proc_info, \
- name: "NCR53C94", \
- detect: dec_esp_detect, \
- info: esp_info, \
- command: esp_command, \
- queuecommand: esp_queue, \
- eh_abort_handler: esp_abort, \
- eh_bus_reset_handler: esp_reset, \
- can_queue: 7, \
- this_id: 7, \
- sg_tablesize: SG_ALL, \
- cmd_per_lun: 1, \
- use_clustering: DISABLE_CLUSTERING, }
+#define SCSI_DEC_ESP { \
+ .proc_name = "esp", \
+ .proc_info = &esp_proc_info, \
+ .name = "NCR53C94", \
+ .detect = dec_esp_detect, \
+ .info = esp_info, \
+ .command = esp_command, \
+ .queuecommand = esp_queue, \
+ .eh_abort_handler = esp_abort, \
+ .eh_bus_reset_handler = esp_reset, \
+ .can_queue = 7, \
+ .this_id = 7, \
+ .sg_tablesize = SG_ALL, \
+ .cmd_per_lun = 1, \
+ .use_clustering = DISABLE_CLUSTERING, \
+}

#endif /* DEC_ESP_H */
--- linux-2.5.45/drivers/scsi/fastlane.h Fri Nov 1 12:49:24 2002
+++ linux-m68k-2.5.45/drivers/scsi/fastlane.h Sun Nov 3 11:00:15 2002
@@ -48,18 +48,20 @@
extern int esp_proc_info(char *buffer, char **start, off_t offset, int length,
int hostno, int inout);

-#define SCSI_FASTLANE { proc_name: "esp-fastlane", \
- proc_info: esp_proc_info, \
- name: "Fastlane SCSI", \
- detect: fastlane_esp_detect, \
- release: fastlane_esp_release, \
- queuecommand: esp_queue, \
- eh_abort_handler: esp_abort, \
- eh_bus_reset_handler: esp_reset, \
- can_queue: 7, \
- this_id: 7, \
- sg_tablesize: SG_ALL, \
- cmd_per_lun: 1, \
- use_clustering: ENABLE_CLUSTERING }
+#define SCSI_FASTLANE { \
+ .proc_name = "esp-fastlane", \
+ .proc_info = esp_proc_info, \
+ .name = "Fastlane SCSI", \
+ .detect = fastlane_esp_detect, \
+ .release = fastlane_esp_release, \
+ .queuecommand = esp_queue, \
+ .eh_abort_handler = esp_abort, \
+ .eh_bus_reset_handler = esp_reset, \
+ .can_queue = 7, \
+ .this_id = 7, \
+ .sg_tablesize = SG_ALL, \
+ .cmd_per_lun = 1, \
+ .use_clustering = ENABLE_CLUSTERING \
+}

#endif /* FASTLANE_H */
--- linux-2.5.45/drivers/scsi/jazz_esp.h Fri Nov 1 12:49:24 2002
+++ linux-m68k-2.5.45/drivers/scsi/jazz_esp.h Sun Nov 3 11:00:41 2002
@@ -20,20 +20,21 @@
extern int esp_proc_info(char *buffer, char **start, off_t offset, int length,
int hostno, int inout);

-#define SCSI_JAZZ_ESP { \
- proc_name: "esp", \
- proc_info: &esp_proc_info, \
- name: "ESP 100/100a/200", \
- detect: jazz_esp_detect, \
- info: esp_info, \
- command: esp_command, \
- queuecommand: esp_queue, \
- eh_abort_handler: esp_abort, \
- eh_bus_reset_handler: esp_reset, \
- can_queue: 7, \
- this_id: 7, \
- sg_tablesize: SG_ALL, \
- cmd_per_lun: 1, \
- use_clustering: DISABLE_CLUSTERING, }
+#define SCSI_JAZZ_ESP { \
+ .proc_name = "esp", \
+ .proc_info = &esp_proc_info, \
+ .name = "ESP 100/100a/200", \
+ .detect = jazz_esp_detect, \
+ .info = esp_info, \
+ .command = esp_command, \
+ .queuecommand = esp_queue, \
+ .eh_abort_handler = esp_abort, \
+ .eh_bus_reset_handler = esp_reset, \
+ .can_queue = 7, \
+ .this_id = 7, \
+ .sg_tablesize = SG_ALL, \
+ .cmd_per_lun = 1, \
+ .use_clustering = DISABLE_CLUSTERING, \
+}

#endif /* JAZZ_ESP_H */
--- linux-2.5.45/drivers/scsi/mac_esp.h Fri Nov 1 12:49:24 2002
+++ linux-m68k-2.5.45/drivers/scsi/mac_esp.h Sun Nov 3 11:00:57 2002
@@ -21,20 +21,22 @@
extern int esp_reset(Scsi_Cmnd *);

-#define SCSI_MAC_ESP { proc_name: "esp", \
- name: "Mac 53C9x SCSI", \
- detect: mac_esp_detect, \
- release: NULL, \
- info: esp_info, \
- /* command: esp_command, */ \
- queuecommand: esp_queue, \
- eh_abort_handler: esp_abort, \
- eh_bus_reset_handler: esp_reset, \
- can_queue: 7, \
- this_id: 7, \
- sg_tablesize: SG_ALL, \
- cmd_per_lun: 1, \
- use_clustering: DISABLE_CLUSTERING }
+#define SCSI_MAC_ESP { \
+ .proc_name = "esp", \
+ .name = "Mac 53C9x SCSI", \
+ .detect = mac_esp_detect, \
+ .release = NULL, \
+ .info = esp_info, \
+ /* .command = esp_command, */ \
+ .queuecommand = esp_queue, \
+ .eh_abort_handler = esp_abort, \
+ .eh_bus_reset_handler = esp_reset, \
+ .can_queue = 7, \
+ .this_id = 7, \
+ .sg_tablesize = SG_ALL, \
+ .cmd_per_lun = 1, \
+ .use_clustering = DISABLE_CLUSTERING \
+}

#endif /* MAC_ESP_H */

--- linux-2.5.45/drivers/scsi/mca_53c9x.h Fri Nov 1 12:49:24 2002
+++ linux-m68k-2.5.45/drivers/scsi/mca_53c9x.h Sun Nov 3 11:01:09 2002
@@ -31,18 +31,20 @@
int hostno, int inout);

-#define MCA_53C9X { proc_name: "esp", \
- name: "NCR 53c9x SCSI", \
- detect: mca_esp_detect, \
- release: mca_esp_release, \
- queuecommand: esp_queue, \
- eh_abort_handler: esp_abort, \
- eh_bus_reset_handler: esp_reset, \
- can_queue: 7, \
- sg_tablesize: SG_ALL, \
- cmd_per_lun: 1, \
- unchecked_isa_dma: 1, \
- use_clustering: DISABLE_CLUSTERING }
+#define MCA_53C9X { \
+ .proc_name = "esp", \
+ .name = "NCR 53c9x SCSI", \
+ .detect = mca_esp_detect, \
+ .release = mca_esp_release, \
+ .queuecommand = esp_queue, \
+ .eh_abort_handler = esp_abort, \
+ .eh_bus_reset_handler = esp_reset, \
+ .can_queue = 7, \
+ .sg_tablesize = SG_ALL, \
+ .cmd_per_lun = 1, \
+ .unchecked_isa_dma = 1, \
+ .use_clustering = DISABLE_CLUSTERING \
+}

/* Ports the ncr's 53c94 can be put at; indexed by pos register value */

--- linux-2.5.45/drivers/scsi/oktagon_esp.h Fri Nov 1 12:49:24 2002
+++ linux-m68k-2.5.45/drivers/scsi/oktagon_esp.h Sun Nov 3 11:01:23 2002
@@ -39,19 +39,20 @@
extern int esp_proc_info(char *buffer, char **start, off_t offset, int length,
int hostno, int inout);

-#define SCSI_OKTAGON_ESP { \
- proc_name: "esp-oktagon", \
- proc_info: &esp_proc_info, \
- name: "BSC Oktagon SCSI", \
- detect: oktagon_esp_detect, \
- release: oktagon_esp_release, \
- queuecommand: esp_queue, \
- eh_abort_handler: esp_abort, \
- eh_bus_reset_handler: esp_reset, \
- can_queue: 7, \
- this_id: 7, \
- sg_tablesize: SG_ALL, \
- cmd_per_lun: 1, \
- use_clustering: ENABLE_CLUSTERING }
+#define SCSI_OKTAGON_ESP { \
+ .proc_name = "esp-oktagon", \
+ .proc_info = &esp_proc_info, \
+ .name = "BSC Oktagon SCSI", \
+ .detect = oktagon_esp_detect, \
+ .release = oktagon_esp_release, \
+ .queuecommand = esp_queue, \
+ .eh_abort_handler = esp_abort, \
+ .eh_bus_reset_handler = esp_reset, \
+ .can_queue = 7, \
+ .this_id = 7, \
+ .sg_tablesize = SG_ALL, \
+ .cmd_per_lun = 1, \
+ .use_clustering = ENABLE_CLUSTERING \
+}

#endif /* OKTAGON_ESP_H */
--- linux-2.5.45/drivers/scsi/sun3x_esp.h Fri Nov 1 12:49:24 2002
+++ linux-m68k-2.5.45/drivers/scsi/sun3x_esp.h Sun Nov 3 11:01:46 2002
@@ -20,20 +20,21 @@

#define DMA_PORTS_P (dregs->cond_reg & DMA_INT_ENAB)

-#define SCSI_SUN3X_ESP { \
- proc_name: "esp", \
- proc_info: &esp_proc_info, \
- name: "Sun ESP 100/100a/200", \
- detect: sun3x_esp_detect, \
- info: esp_info, \
- command: esp_command, \
- queuecommand: esp_queue, \
- eh_abort_handler: esp_abort, \
- eh_bus_reset_handler: esp_reset, \
- can_queue: 7, \
- this_id: 7, \
- sg_tablesize: SG_ALL, \
- cmd_per_lun: 1, \
- use_clustering: DISABLE_CLUSTERING, }
+#define SCSI_SUN3X_ESP { \
+ .proc_name = "esp", \
+ .proc_info = &esp_proc_info, \
+ .name = "Sun ESP 100/100a/200", \
+ .detect = sun3x_esp_detect, \
+ .info = esp_info, \
+ .command = esp_command, \
+ .queuecommand = esp_queue, \
+ .eh_abort_handler = esp_abort, \
+ .eh_bus_reset_handler = esp_reset, \
+ .can_queue = 7, \
+ .this_id = 7, \
+ .sg_tablesize = SG_ALL, \
+ .cmd_per_lun = 1, \
+ .use_clustering = DISABLE_CLUSTERING, \
+}

#endif /* !(_SUN3X_ESP_H) */

Gr{oetje,eeting}s,

Geert

-- Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds

- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/

Next message: Keith Owens: "Re: kbuild: Compatible with old bash, fix help, make clean fix"
Previous message: Geert Uytterhoeven: "[PATCH] NCR53C9x ESP updates"
Next in thread: Christoph Hellwig: "Re: [PATCH] NCR53C9x ESP: C99 designated initializers"
Reply: Christoph Hellwig: "Re: [PATCH] NCR53C9x ESP: C99 designated initializers"