Hi,
I have more kernel-parameters updates for you
(and more yet to do).
Please apply to 2.5.43.
~Randy
--------------A29991F0A991A1D2604C23D2
Content-Type: text/plain; charset=us-ascii;
name="kernprms-2543.patch"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
filename="kernprms-2543.patch"
--- ./Documentation/kernel-parameters.txt.2543 Tue Oct 15 20:29:07 2002
+++ ./Documentation/kernel-parameters.txt Thu Oct 17 21:40:18 2002
@@ -1,4 +1,4 @@
-July 2000 Kernel Parameters v2.4.0
+October 2002 Kernel Parameters v2.5.0
~~~~~~~~~~~~~~~~~
The following is a consolidated list of the kernel parameters as implemented
@@ -105,6 +105,10 @@
atascsi= [HW,SCSI] Atari SCSI.
+ atkbd_set= [HW] select keyboard code set
+
+ atkbd_reset [HW] reset keyboard during initialization
+
awe= [HW,SOUND]
aztcd= [HW,CD] Aztec CD driver.
@@ -238,6 +242,19 @@
hisax= [HW,ISDN]
+ i8042_direct [HW] non-translated mode
+
+ i8042_dumbkbd [HW]
+
+ i8042_noaux [HW]
+
+ i8042_nomux [HW]
+
+ i8042_reset [HW] reset the 8042 controller during init
+ and cleanup
+
+ i8042_unlock [HW] unlock (ignore) the keylock
+
i810= [HW,DRM]
ibmmcascsi= [HW,MCA,SCSI] IBM MicroChannel SCSI adapter.
@@ -258,8 +275,12 @@
initrd= [BOOT] Specify the location of the initial ramdisk.
+ inport_irq= [HW,MOUSE] set inport busmouse IRQ
+
ip= [IP_PNP]
+ ip2= [HW] set IO/IRQ pairs for up to 4 IntelliPort boards
+
isapnp= [ISAPNP] Specify RDP, reset, pci_scan and verbosity.
isapnp_reserve_irq= [ISAPNP] Exclude IRQs for the autoconfiguration.
@@ -280,7 +301,7 @@
kbd-reset [VT]
- keepinitrd [HW, ARM]
+ keepinitrd [HW,ARM]
load_ramdisk= [RAM] List of ramdisks to load from floppy.
@@ -288,7 +309,9 @@
lockd.tcpport= [NFS]
- logi_busmouse= [HW, MOUSE]
+ logi_busmouse= [HW,MOUSE]
+
+ logibm_irq= [HW,MOUSE] set mouse IRQ
lp=0 [LP] Specify parallel ports to use, e.g,
lp=port[,port...] lp=none,parport0 (lp0 not configured, lp1 uses
@@ -356,6 +379,8 @@
mem=nopentium [BUGS=IA-32] Disable usage of 4MB pages for kernel
memory.
+ meye= [HW] set MotionEye Camera parameters
+
mga= [HW,DRM]
mpu401= [HW,SOUND]
@@ -393,12 +418,12 @@
noapic [SMP,APIC] Tells the kernel not to make use of any
APIC that may be present on the system.
- noasync [HW, M68K] Disables async and sync negotiation for
+ noasync [HW,M68K] Disables async and sync negotiation for
all devices.
nocache [ARM]
- nodisconnect [HW,SCSI, M68K] Disables SCSI disconnects.
+ nodisconnect [HW,SCSI,M68K] Disables SCSI disconnects.
nohlt [BUGS=ARM]
@@ -421,10 +446,12 @@
nosmp [SMP] Tells an SMP kernel to act as a UP kernel.
- nosync [HW, M68K] Disables sync negotiation for all devices.
+ nosync [HW,M68K] Disables sync negotiation for all devices.
notsc [BUGS=IA-32] Disable Time Stamp Counter
+ nousb [HW] disable USB subsystem
+
nowb [ARM]
opl3= [HW,SOUND]
@@ -503,6 +530,8 @@
have no effect if ACPI IRQ routing is
enabled.
+ pcmv= [HW] BadgePad 4 PCMCIA parameters
+
pd. [PARIDE]
pf. [PARIDE]
@@ -519,6 +548,8 @@
prompt_ramdisk= [RAM] List of RAM disks to prompt for floppy disk
before loading.
+ psmouse_noext [HW,MOUSE] prevent probing for PS/2 mouse extensions
+
pss= [HW,SOUND]
pt. [PARIDE]
@@ -567,6 +598,8 @@
scsihosts= [SCSI]
+ sf16fm= [HW] set IO address
+
sg_def_reserved_size=
[SCSI]
@@ -582,6 +615,9 @@
sonycd535= [HW,CD]
+ sonypi= [HW] set parameters for Sony Programmable
+ I/O Control Device
+
sound= [SOUND]
soundmodem= [HW,AX25,SOUND] Use sound card as packet radio modem.
@@ -598,7 +634,7 @@
swiotlb= [IA-64] Number of I/O TLB slabs.
- switches= [HW, M68K]
+ switches= [HW,M68K]
sym53c416= [HW,SCSI]
@@ -614,6 +650,8 @@
tgfx_3= [HW,JOY]
+ tiusb= [HW] set timeout for TI USB GraphLink
+
tmc8xx= [HW,SCSI]
tmscsim= [HW,SCSI]
--------------A29991F0A991A1D2604C23D2--
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/