2.5.40 Oops on boot (ide_setup_dma+0x16)

[Steven Cole]

Greetings all,

After getting 2.5.40 (many thanks to John Bradford for his mirror),
I got this oops, identical to 2.5.39 with a fix to isapnp.c. This
post is to verify that this problem still exists in 2.5.40.

Oops info copied down by hand:

EIP is at ide_iomio_dma+0xa4/0x110

Call Trace:
[<c01e02e6>]ide_setup_dma+0x16/0x2a0
[<c01deb46>]ide_hwif_setup_dma+0xc6/0x100
[<c01deeca>]do_ide_setup_pci_device+0x18/0x60
[<c01def48>]ide_setup_pci_device+0x18/0x60
[<c0105030>]init+0x0/0x160
[<c010504c>]init+0x1c/0x160
[<c0105030>]init+0x0/0x160
[<c0105495>]kernel_thread_helper_0x5/0x10

This machine is a single PIII with Intel 82371AB PII4X chipset
and Promise PDC20262 disk controller.

My .config info was posted earlier here:
http://marc.theaimsgroup.com/?l=linux-kernel&m=103349300620391&w=2

I also recompiled without CONFIG_IDEDMA_PCI_AUTO
and without CONFIG_IDEDMA_AUTO and rebooted with the
same results as above.

Steven