ASUS P4S533 (SiS645DX chipset)
P4 2Ghz
1G PC2700 RAM
hda: Maxtor 4G100J5, ATA DISK drive
hdc: LG CD-RW CED-8120B, ATAPI CD/DVD-ROM drive <- CD-writer trying to be ide-scsi
hdd: SAMSUNG DVD-ROM SD-616T, ATAPI CD/DVD-ROM drive
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SIS5513: IDE controller at PCI slot 00:02.5
SIS5513: chipset revision 208
SIS5513: not 100% native mode: will probe irqs later
SiS646 ATA 133 controller
ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xd808-0xd80f, BIOS settings: hdc:DMA, hdd:DMA
hda: Maxtor 4G100J5, ATA DISK drive
blk: queue c0404f20, I/O limit 4095Mb (mask 0xffffffff)
hdc: LG CD-RW CED-8120B, ATAPI CD/DVD-ROM drive
hdd: SAMSUNG DVD-ROM SD-616T, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: host protected area => 1
hda: 200108160 sectors (102455 MB) w/2048KiB Cache, CHS=12456/255/63, UDMA(133)
hdd: ATAPI 48X DVD-ROM drive, 512kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.12
Partition check:
/dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 p6 p7 p8 p9 p10 p11 >
SCSI subsystem driver Revision: 1.00
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
scsi : aborting command due to timeout : pid 0, scsi0, channel 0, id 0, lun 0 0x12 00 00 00 ff 00
hdc: lost interrupt
Vendor: <random garbage> Model: ? Rev:
Type: Direct-Access ANSI SCSI revision: 02
-- Murray J. Root ------------------------------------------------ DISCLAIMER: http://www.goldmark.org/jeff/stupid-disclaimers/ ------------------------------------------------ Mandrake on irc.freenode.net: #mandrake & #mandrake-linux = help for newbies #mdk-cooker = Mandrake Cooker- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/