Re: Warning - running *really* short on DMA buffers while

[James Bottomley]

> Since your drive cannot handle 253 tags, when saturated with commands,
> a new command is never submitted to the drive directly.  Instead the
> command waits in the aic7xxx driver's queue until space is available
> on the device.  In FreeBSD, this never happens as tag depth is known
> to, and adjusted by, the mid-layer.  In Linux I must report the queue
> depth without having sufficient load or history with the device to
> know anything about its capabilities so I have no choice but to
> throttle internally should the device support fewer tags than
> initially reported to the OS.  You can determine the actual device
> queue depth from "cat /proc/scsi/aic7xxx/#".  Run a bunch of I/O first
> so that the tag depth gets locked first. 

Linux is perfectly happy just to have you return 1 in queuecommand if the 
device won't accept the tag.  The can_queue parameter represents the maximum 
number of outstanding commands the mid-layer will ever send.  The mid-layer is 
happy to re-queue I/O below this limit if it cannot be accepted by the drive.  
In fact, that's more or less what queue plugging is about.

The only problem occurs if you return 1 from queuecommand with no other 
outstanding I/O for the device.

There should be no reason in 2.5 for a driver to have to implement an internal 
queue.

James