diff -urN linux-2.5.38/Documentation/s390/CommonIO linux-2.5.38-s390/Documentation/s390/CommonIO
--- linux-2.5.38/Documentation/s390/CommonIO Sun Sep 22 06:25:29 2002
+++ linux-2.5.38-s390/Documentation/s390/CommonIO Tue Sep 24 17:41:55 2002
@@ -123,9 +123,6 @@
* /proc/chpids
- This entry will only show up if you specified CONFIG_CHSC=y during kernel
- config.
-
This entry serves a dual purpose:
- show which chpids are currently known to Linux and their status (online,
diff -urN linux-2.5.38/arch/s390/Config.help linux-2.5.38-s390/arch/s390/Config.help
--- linux-2.5.38/arch/s390/Config.help Sun Sep 22 06:25:16 2002
+++ linux-2.5.38-s390/arch/s390/Config.help Tue Sep 24 17:41:55 2002
@@ -160,25 +160,11 @@
Select "vm_reader" if you are running under VM/ESA and want
to IPL the image from the emulated card reader.
-CONFIG_FAST_IRQ
- Select this option in order to get the interrupts processed faster
- on your S/390 or zSeries machine. If selected, after an interrupt
- is processed, the channel subsystem will be asked for other pending
- interrupts which will also be processed before leaving the interrupt
- context. This speeds up the I/O a lot. Say "Y".
-
CONFIG_MACHCHK_WARNING
Select this option if you want the machine check handler on IBM S/390 or
zSeries to process warning machine checks (e.g. on power failures).
If unsure, say "Y".
-CONFIG_CHSC
- Select this option if you want the s390 common I/O layer to use information
- obtained by channel subsystem calls. This will enable Linux to process link
- failures and resource accessibility events. Moreover, if you have procfs
- enabled, you'll be able to toggle chpids logically offline and online. Even
- if you don't understand what this means, you should say "Y".
-
CONFIG_PROCESS_DEBUG
Say Y to print all process fault locations to the console. This is
a debugging option; you probably do not want to set it unless you
diff -urN linux-2.5.38/arch/s390/Makefile linux-2.5.38-s390/arch/s390/Makefile
--- linux-2.5.38/arch/s390/Makefile Sun Sep 22 06:25:02 2002
+++ linux-2.5.38-s390/arch/s390/Makefile Tue Sep 24 17:41:55 2002
@@ -23,15 +23,12 @@
HEAD := arch/s390/kernel/head.o arch/s390/kernel/init_task.o
-SUBDIRS += arch/s390/mm arch/s390/kernel arch/s390/lib drivers/s390
-CORE_FILES := arch/s390/mm/mm.o arch/s390/kernel/kernel.o $(CORE_FILES)
-LIBS := $(TOPDIR)/arch/s390/lib/lib.a $(LIBS) $(TOPDIR)/arch/s390/lib/lib.a
-
-DRIVERS += drivers/s390/built-in.o
+libs-y += arch/s390/lib/
+core-y += arch/s390/kernel/ arch/s390/mm/
+drivers-y += drivers/s390/
ifeq ($(CONFIG_MATHEMU),y)
- SUBDIRS += arch/s390/math-emu
- DRIVERS += arch/s390/math-emu/math-emu.o
+ core-y += arch/s390/math-emu/
endif
all: image listing
diff -urN linux-2.5.38/arch/s390/config.in linux-2.5.38-s390/arch/s390/config.in
--- linux-2.5.38/arch/s390/config.in Sun Sep 22 06:25:17 2002
+++ linux-2.5.38-s390/arch/s390/config.in Tue Sep 24 17:41:55 2002
@@ -17,22 +17,19 @@
source init/Config.in
mainmenu_option next_comment
+comment 'Base setup'
comment 'Processor type and features'
bool 'Symmetric multi-processing support' CONFIG_SMP
bool 'IEEE FPU emulation' CONFIG_MATHEMU
-endmenu
-mainmenu_option next_comment
-comment 'Base setup'
-bool 'Fast IRQ handling' CONFIG_FAST_IRQ
+comment 'I/O subsystem configuration'
bool 'Process warning machine checks' CONFIG_MACHCHK_WARNING
-bool 'Use chscs for Common I/O' CONFIG_CHSC
-
tristate 'QDIO support' CONFIG_QDIO
- if [ "$CONFIG_QDIO" != "n" ]; then
- bool ' Performance statistics in /proc' CONFIG_QDIO_PERF_STATS
- fi
+if [ "$CONFIG_QDIO" != "n" ]; then
+ bool ' Performance statistics in /proc' CONFIG_QDIO_PERF_STATS
+fi
+comment 'Misc'
bool 'Builtin IPL record support' CONFIG_IPL
if [ "$CONFIG_IPL" = "y" ]; then
choice 'IPL method generated into head.S' \
@@ -68,7 +65,6 @@
mainmenu_option next_comment
comment 'Kernel hacking'
-#bool 'Debug kmalloc/kfree' CONFIG_DEBUG_MALLOC
#if [ "$CONFIG_CTC" = "y" ]; then
# bool 'Remote GDB kernel debugging' CONFIG_REMOTE_DEBUG
#fi
diff -urN linux-2.5.38/arch/s390/defconfig linux-2.5.38-s390/arch/s390/defconfig
--- linux-2.5.38/arch/s390/defconfig Sun Sep 22 06:25:17 2002
+++ linux-2.5.38-s390/arch/s390/defconfig Tue Sep 24 17:41:55 2002
@@ -31,19 +31,25 @@
CONFIG_KMOD=y
#
+# Base setup
+#
+
+#
# Processor type and features
#
CONFIG_SMP=y
CONFIG_MATHEMU=y
#
-# Base setup
+# I/O subsystem configuration
#
-CONFIG_FAST_IRQ=y
CONFIG_MACHCHK_WARNING=y
-CONFIG_CHSC=y
CONFIG_QDIO=m
# CONFIG_QDIO_PERF_STATS is not set
+
+#
+# Misc
+#
CONFIG_IPL=y
# CONFIG_IPL_TAPE is not set
CONFIG_IPL_VM=y
@@ -84,9 +90,6 @@
#
# CONFIG_SCSI_7000FASST is not set
# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AHA152X is not set
-# CONFIG_SCSI_AHA1542 is not set
-# CONFIG_SCSI_AHA1740 is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_DPT_I2O is not set
@@ -114,7 +117,6 @@
# CONFIG_SCSI_PCI2220I is not set
# CONFIG_SCSI_PSI240I is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
-# CONFIG_SCSI_SIM710 is not set
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_U14_34F is not set
@@ -153,7 +155,7 @@
CONFIG_MD_RAID1=m
CONFIG_MD_RAID5=m
# CONFIG_MD_MULTIPATH is not set
-CONFIG_BLK_DEV_LVM=m
+# CONFIG_BLK_DEV_LVM is not set
#
# Character device drivers
@@ -226,25 +228,22 @@
# CONFIG_INET_ECN is not set
# CONFIG_SYN_COOKIES is not set
CONFIG_IPV6=m
-# CONFIG_KHTTPD is not set
-# CONFIG_ATM is not set
-# CONFIG_VLAN_8021Q is not set
#
-#
+# SCTP Configuration (EXPERIMENTAL)
#
+CONFIG_IPV6_SCTP__=m
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_LLC is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
-
-#
-# Appletalk devices
-#
# CONFIG_DEV_APPLETALK is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
-# CONFIG_LLC is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
@@ -299,7 +298,7 @@
# CONFIG_HPFS_FS is not set
CONFIG_PROC_FS=y
CONFIG_DEVFS_FS=y
-CONFIG_DEVFS_MOUNT=y
+# CONFIG_DEVFS_MOUNT is not set
# CONFIG_DEVFS_DEBUG is not set
# CONFIG_DEVPTS_FS is not set
# CONFIG_QNX4FS_FS is not set
@@ -311,6 +310,9 @@
# CONFIG_UDF_RW is not set
# CONFIG_UFS_FS is not set
# CONFIG_UFS_FS_WRITE is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_XFS_RT is not set
+# CONFIG_XFS_QUOTA is not set
#
# Network File Systems
@@ -363,6 +365,11 @@
CONFIG_MAGIC_SYSRQ=y
#
+# Security options
+#
+CONFIG_SECURITY_CAPABILITIES=y
+
+#
# Library routines
#
# CONFIG_CRC32 is not set
diff -urN linux-2.5.38/arch/s390/kernel/Makefile linux-2.5.38-s390/arch/s390/kernel/Makefile
--- linux-2.5.38/arch/s390/kernel/Makefile Tue Sep 24 17:41:38 2002
+++ linux-2.5.38-s390/arch/s390/kernel/Makefile Tue Sep 24 17:41:55 2002
@@ -5,8 +5,6 @@
EXTRA_TARGETS := head.o init_task.o
EXTRA_AFLAGS := -traditional
-O_TARGET := kernel.o
-
export-objs := debug.o ebcdic.o s390_ext.o smp.o s390_ksyms.o
obj-y := entry.o bitmap.o traps.o time.o process.o \
setup.o sys_s390.o ptrace.o signal.o cpcmd.o ebcdic.o \
diff -urN linux-2.5.38/arch/s390/math-emu/Makefile linux-2.5.38-s390/arch/s390/math-emu/Makefile
--- linux-2.5.38/arch/s390/math-emu/Makefile Sun Sep 22 06:25:05 2002
+++ linux-2.5.38-s390/arch/s390/math-emu/Makefile Tue Sep 24 17:41:55 2002
@@ -2,7 +2,6 @@
# Makefile for the FPU instruction emulation.
#
-O_TARGET := math-emu.o
obj-$(CONFIG_MATHEMU) := math.o qrnnd.o
EXTRA_CFLAGS = -I. -I$(TOPDIR)/include/math-emu -w
diff -urN linux-2.5.38/arch/s390/mm/Makefile linux-2.5.38-s390/arch/s390/mm/Makefile
--- linux-2.5.38/arch/s390/mm/Makefile Sun Sep 22 06:25:29 2002
+++ linux-2.5.38-s390/arch/s390/mm/Makefile Tue Sep 24 17:41:55 2002
@@ -7,8 +7,6 @@
#
# Note 2! The CFLAGS definition is now in the main makefile...
-O_TARGET := mm.o
-
obj-y := init.o fault.o ioremap.o extable.o
include $(TOPDIR)/Rules.make
diff -urN linux-2.5.38/arch/s390x/Config.help linux-2.5.38-s390/arch/s390x/Config.help
--- linux-2.5.38/arch/s390x/Config.help Sun Sep 22 06:25:01 2002
+++ linux-2.5.38-s390/arch/s390x/Config.help Tue Sep 24 17:41:55 2002
@@ -159,25 +159,11 @@
Select "vm_reader" if you are running under VM/ESA and want
to IPL the image from the emulated card reader.
-CONFIG_FAST_IRQ
- Select this option in order to get the interrupts processed faster
- on your S/390 or zSeries machine. If selected, after an interrupt
- is processed, the channel subsystem will be asked for other pending
- interrupts which will also be processed before leaving the interrupt
- context. This speeds up the I/O a lot. Say "Y".
-
CONFIG_MACHCHK_WARNING
Select this option if you want the machine check handler on IBM S/390 or
zSeries to process warning machine checks (e.g. on power failures).
If unsure, say "Y".
-CONFIG_CHSC
- Select this option if you want the s390 common I/O layer to use information
- obtained by channel subsystem calls. This will enable Linux to process link
- failures and resource accessibility events. Moreover, if you have procfs
- enabled, you'll be able to toggle chpids logically offline and online. Even
- if you don't understand what this means, you should say "Y".
-
CONFIG_S390_SUPPORT
Select this option if you want to enable your system kernel to
handle system-calls from ELF binaries for 31 bit ESA. This option
diff -urN linux-2.5.38/arch/s390x/Makefile linux-2.5.38-s390/arch/s390x/Makefile
--- linux-2.5.38/arch/s390x/Makefile Sun Sep 22 06:25:10 2002
+++ linux-2.5.38-s390/arch/s390x/Makefile Tue Sep 24 17:41:55 2002
@@ -24,10 +24,9 @@
HEAD := arch/s390x/kernel/head.o arch/s390x/kernel/init_task.o
-SUBDIRS += arch/s390x/mm arch/s390x/kernel arch/s390x/lib drivers/s390
-CORE_FILES := arch/s390x/mm/mm.o arch/s390x/kernel/kernel.o $(CORE_FILES)
-DRIVERS := $(DRIVERS) drivers/s390/built-in.o
-LIBS := $(TOPDIR)/arch/s390x/lib/lib.a $(LIBS) $(TOPDIR)/arch/s390x/lib/lib.a
+libs-y += arch/s390x/lib/
+core-y += arch/s390x/kernel/ arch/s390x/mm/
+drivers-y += drivers/s390/
all: image listing
diff -urN linux-2.5.38/arch/s390x/boot/Makefile linux-2.5.38-s390/arch/s390x/boot/Makefile
--- linux-2.5.38/arch/s390x/boot/Makefile Sun Sep 22 06:25:10 2002
+++ linux-2.5.38-s390/arch/s390x/boot/Makefile Tue Sep 24 17:41:55 2002
@@ -2,8 +2,6 @@
# Makefile for the linux s390-specific parts of the memory manager.
#
-O_TARGET :=
-
EXTRA_AFLAGS := -traditional
include $(TOPDIR)/Rules.make
diff -urN linux-2.5.38/arch/s390x/config.in linux-2.5.38-s390/arch/s390x/config.in
--- linux-2.5.38/arch/s390x/config.in Sun Sep 22 06:25:00 2002
+++ linux-2.5.38-s390/arch/s390x/config.in Tue Sep 24 17:41:55 2002
@@ -17,31 +17,29 @@
source init/Config.in
mainmenu_option next_comment
+comment 'Base setup'
comment 'Processor type and features'
bool 'Symmetric multi-processing support' CONFIG_SMP
bool 'Kernel support for 31 bit emulation' CONFIG_S390_SUPPORT
if [ "$CONFIG_S390_SUPPORT" = "y" ]; then
tristate 'Kernel support for 31 bit ELF binaries' CONFIG_BINFMT_ELF32
fi
-endmenu
-mainmenu_option next_comment
-comment 'Base setup'
-bool 'Fast IRQ handling' CONFIG_FAST_IRQ
+comment 'I/O subsystem configuration'
bool 'Process warning machine checks' CONFIG_MACHCHK_WARNING
-bool 'Use chscs for Common I/O' CONFIG_CHSC
-
tristate 'QDIO support' CONFIG_QDIO
- if [ "$CONFIG_QDIO" != "n" ]; then
- bool ' Performance statistics in /proc' CONFIG_QDIO_PERF_STATS
- fi
+if [ "$CONFIG_QDIO" != "n" ]; then
+ bool ' Performance statistics in /proc' CONFIG_QDIO_PERF_STATS
+fi
+comment 'Misc'
bool 'Builtin IPL record support' CONFIG_IPL
if [ "$CONFIG_IPL" = "y" ]; then
choice 'IPL method generated into head.S' \
"tape CONFIG_IPL_TAPE \
vm_reader CONFIG_IPL_VM" tape
fi
+
define_bool CONFIG_KCORE_ELF y
tristate 'Kernel support for ELF binaries' CONFIG_BINFMT_ELF
tristate 'Kernel support for MISC binaries' CONFIG_BINFMT_MISC
@@ -71,7 +69,6 @@
mainmenu_option next_comment
comment 'Kernel hacking'
-#bool 'Debug kmalloc/kfree' CONFIG_DEBUG_MALLOC
#if [ "$CONFIG_CTC" = "y" ]; then
# bool 'Remote GDB kernel debugging' CONFIG_REMOTE_DEBUG
#fi
diff -urN linux-2.5.38/arch/s390x/defconfig linux-2.5.38-s390/arch/s390x/defconfig
--- linux-2.5.38/arch/s390x/defconfig Sun Sep 22 06:24:57 2002
+++ linux-2.5.38-s390/arch/s390x/defconfig Tue Sep 24 17:41:55 2002
@@ -31,6 +31,10 @@
CONFIG_KMOD=y
#
+# Base setup
+#
+
+#
# Processor type and features
#
CONFIG_SMP=y
@@ -38,13 +42,15 @@
CONFIG_BINFMT_ELF32=y
#
-# Base setup
+# I/O subsystem configuration
#
-CONFIG_FAST_IRQ=y
CONFIG_MACHCHK_WARNING=y
-CONFIG_CHSC=y
-CONFIG_QDIO=m
+CONFIG_QDIO=y
# CONFIG_QDIO_PERF_STATS is not set
+
+#
+# Misc
+#
CONFIG_IPL=y
# CONFIG_IPL_TAPE is not set
CONFIG_IPL_VM=y
@@ -85,9 +91,6 @@
#
# CONFIG_SCSI_7000FASST is not set
# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AHA152X is not set
-# CONFIG_SCSI_AHA1542 is not set
-# CONFIG_SCSI_AHA1740 is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_DPT_I2O is not set
@@ -115,7 +118,6 @@
# CONFIG_SCSI_PCI2220I is not set
# CONFIG_SCSI_PSI240I is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
-# CONFIG_SCSI_SIM710 is not set
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_U14_34F is not set
@@ -153,7 +155,7 @@
CONFIG_MD_RAID1=m
CONFIG_MD_RAID5=m
# CONFIG_MD_MULTIPATH is not set
-CONFIG_BLK_DEV_LVM=m
+# CONFIG_BLK_DEV_LVM is not set
#
# Character device drivers
@@ -225,26 +227,23 @@
# CONFIG_ARPD is not set
# CONFIG_INET_ECN is not set
# CONFIG_SYN_COOKIES is not set
-CONFIG_IPV6=m
-# CONFIG_KHTTPD is not set
-# CONFIG_ATM is not set
-# CONFIG_VLAN_8021Q is not set
+# CONFIG_IPV6 is not set
#
-#
+# SCTP Configuration (EXPERIMENTAL)
#
+CONFIG_IPV6_SCTP__=y
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_LLC is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
-
-#
-# Appletalk devices
-#
# CONFIG_DEV_APPLETALK is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
-# CONFIG_LLC is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
@@ -299,7 +298,7 @@
# CONFIG_HPFS_FS is not set
CONFIG_PROC_FS=y
CONFIG_DEVFS_FS=y
-CONFIG_DEVFS_MOUNT=y
+# CONFIG_DEVFS_MOUNT is not set
# CONFIG_DEVFS_DEBUG is not set
# CONFIG_DEVPTS_FS is not set
# CONFIG_QNX4FS_FS is not set
@@ -311,6 +310,9 @@
# CONFIG_UDF_RW is not set
# CONFIG_UFS_FS is not set
# CONFIG_UFS_FS_WRITE is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_XFS_RT is not set
+# CONFIG_XFS_QUOTA is not set
#
# Network File Systems
@@ -320,12 +322,12 @@
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
# CONFIG_ROOT_NFS is not set
-# CONFIG_NFSD is not set
+CONFIG_NFSD=y
# CONFIG_NFSD_V3 is not set
# CONFIG_NFSD_TCP is not set
CONFIG_SUNRPC=y
CONFIG_LOCKD=y
-# CONFIG_EXPORTFS is not set
+CONFIG_EXPORTFS=y
# CONFIG_SMB_FS is not set
# CONFIG_NCP_FS is not set
# CONFIG_NCPFS_PACKET_SIGNING is not set
@@ -363,6 +365,11 @@
CONFIG_MAGIC_SYSRQ=y
#
+# Security options
+#
+CONFIG_SECURITY_CAPABILITIES=y
+
+#
# Library routines
#
# CONFIG_CRC32 is not set
diff -urN linux-2.5.38/arch/s390x/kernel/Makefile linux-2.5.38-s390/arch/s390x/kernel/Makefile
--- linux-2.5.38/arch/s390x/kernel/Makefile Tue Sep 24 17:41:38 2002
+++ linux-2.5.38-s390/arch/s390x/kernel/Makefile Tue Sep 24 17:41:55 2002
@@ -5,8 +5,6 @@
EXTRA_TARGETS := head.o init_task.o
EXTRA_AFLAGS := -traditional
-O_TARGET := kernel.o
-
export-objs := debug.o ebcdic.o s390_ext.o smp.o s390_ksyms.o \
exec32.o
diff -urN linux-2.5.38/arch/s390x/mm/Makefile linux-2.5.38-s390/arch/s390x/mm/Makefile
--- linux-2.5.38/arch/s390x/mm/Makefile Sun Sep 22 06:25:11 2002
+++ linux-2.5.38-s390/arch/s390x/mm/Makefile Tue Sep 24 17:41:55 2002
@@ -7,8 +7,6 @@
#
# Note 2! The CFLAGS definition is now in the main makefile...
-O_TARGET := mm.o
-
obj-y := init.o fault.o ioremap.o extable.o
include $(TOPDIR)/Rules.make
diff -urN linux-2.5.38/drivers/s390/Makefile linux-2.5.38-s390/drivers/s390/Makefile
--- linux-2.5.38/drivers/s390/Makefile Sun Sep 22 06:25:10 2002
+++ linux-2.5.38-s390/drivers/s390/Makefile Tue Sep 24 17:41:55 2002
@@ -9,4 +9,6 @@
obj-y += s390mach.o s390dyn.o sysinfo.o
obj-y += block/ char/ misc/ net/ cio/
+drivers-y += drivers/s390/built-in.o
+
include $(TOPDIR)/Rules.make
diff -urN linux-2.5.38/drivers/s390/cio/Makefile linux-2.5.38-s390/drivers/s390/cio/Makefile
--- linux-2.5.38/drivers/s390/cio/Makefile Sun Sep 22 06:24:57 2002
+++ linux-2.5.38-s390/drivers/s390/cio/Makefile Tue Sep 24 17:41:55 2002
@@ -3,9 +3,8 @@
#
obj-y := cio_debug.o # make sure this always comes first
-obj-y += airq.o blacklist.o cio.o ioinfo.o misc.o requestirq.o s390io.o
+obj-y += airq.o blacklist.o cio.o ioinfo.o misc.o requestirq.o s390io.o chsc.o
-obj-$(CONFIG_CHSC) += chsc.o
obj-$(CONFIG_PROC_FS) += proc.o
export-objs += airq.o cio.o ioinfo.o requestirq.o s390io.o
diff -urN linux-2.5.38/drivers/s390/cio/cio.c linux-2.5.38-s390/drivers/s390/cio/cio.c
--- linux-2.5.38/drivers/s390/cio/cio.c Tue Sep 24 17:41:38 2002
+++ linux-2.5.38-s390/drivers/s390/cio/cio.c Tue Sep 24 17:41:55 2002
@@ -969,10 +969,7 @@
return;
}
/* endif */
-#ifdef CONFIG_FAST_IRQ
do {
-#endif /* CONFIG_FAST_IRQ */
-
/*
* Non I/O-subchannel thin interrupts are processed differently
*/
@@ -1008,16 +1005,14 @@
irq_exit ();
}
-#ifdef CONFIG_FAST_IRQ
-
/*
* Are more interrupts pending?
* If so, the tpi instruction will update the lowcore
* to hold the info for the next interrupt.
+ * We don't do this for VM because a tpi drops the cpu
+ * out of the sie which costs more cycles than it saves.
*/
- } while (tpi (NULL) != 0);
-
-#endif /* CONFIG_FAST_IRQ */
+ } while (!MACHINE_IS_VM && tpi (NULL) != 0);
return;
}
diff -urN linux-2.5.38/drivers/s390/cio/misc.c linux-2.5.38-s390/drivers/s390/cio/misc.c
--- linux-2.5.38/drivers/s390/cio/misc.c Sun Sep 22 06:25:07 2002
+++ linux-2.5.38-s390/drivers/s390/cio/misc.c Tue Sep 24 17:41:55 2002
@@ -1,7 +1,7 @@
/*
* drivers/s390/s390io.c
* S/390 common I/O routines
- * $Revision: 1.4 $
+ * $Revision: 1.5 $
*
* Copyright (C) 1999-2002 IBM Deutschland Entwicklung GmbH,
* IBM Corporation
@@ -212,9 +212,7 @@
CRW_DEBUG(KERN_NOTICE, 2,
"source is channel subsystem\n");
-#ifdef CONFIG_CHSC
s390_process_css();
-#endif
break;
default:
diff -urN linux-2.5.38/drivers/s390/cio/s390io.c linux-2.5.38-s390/drivers/s390/cio/s390io.c
--- linux-2.5.38/drivers/s390/cio/s390io.c Tue Sep 24 17:41:38 2002
+++ linux-2.5.38-s390/drivers/s390/cio/s390io.c Tue Sep 24 17:41:55 2002
@@ -995,10 +995,8 @@
int ccode2; /* condition code for other I/O routines */
schib_t *p_schib;
int ret;
-#ifdef CONFIG_CHSC
int chp = 0;
int mask;
-#endif /* CONFIG_CHSC */
char dbf_txt[15];
@@ -1121,7 +1119,6 @@
ioinfo[irq]->opm = ioinfo[irq]->schib.pmcw.pim
& ioinfo[irq]->schib.pmcw.pam & ioinfo[irq]->schib.pmcw.pom;
-#ifdef CONFIG_CHSC
if (ioinfo[irq]->opm) {
for (chp=0;chp<=7;chp++) {
mask = 0x80 >> chp;
@@ -1133,7 +1130,6 @@
}
}
}
-#endif /* CONFIG_CHSC */
CIO_DEBUG_IFMSG(KERN_INFO, 0,
"Detected device %04X "
@@ -1700,11 +1696,9 @@
int ccode;
__u8 pathmask;
__u8 domask;
-#ifdef CONFIG_CHSC
int chp;
int mask;
int old_opm = 0;
-#endif /* CONFIG_CHSC */
int ret = 0;
int i;
@@ -1720,9 +1714,7 @@
if (ioinfo[irq]->st)
return -ENODEV;
-#ifdef CONFIG_CHSC
old_opm = ioinfo[irq]->opm;
-#endif /* CONFIG_CHSC */
ccode = stsch (irq, &(ioinfo[irq]->schib));
if (ccode) {
@@ -1735,7 +1727,6 @@
ioinfo[irq]->ui.flags.pgid_supp = 0;
ret = 0;
-#ifdef CONFIG_CHSC
/*
* disable if chpid is logically offline
*/
@@ -1781,14 +1772,12 @@
} else {
ret = 0;
}
-#endif /* CONFIG_CHSC */
return ret;
}
ioinfo[irq]->opm = ioinfo[irq]->schib.pmcw.pim
& ioinfo[irq]->schib.pmcw.pam & ioinfo[irq]->schib.pmcw.pom;
-#ifdef CONFIG_CHSC
if (ioinfo[irq]->opm) {
for (chp=0;chp<=7;chp++) {
mask = 0x80 >> chp;
@@ -1830,7 +1819,6 @@
pdevreg->oper_func( irq, pdevreg);
}
-#endif /* CONFIG_CHSC */
if ( ioinfo[irq]->ui.flags.pgid_supp == 0 )
return( 0); /* just exit ... */
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/