Re: [patch] linux-2.5.38 new i2c parallel port adapter

[Jeff Garzik]

Albert Cranford wrote:
> +#define DEFAULT_BASE 0x378

surely there is a parport define for this?

> +static int base=0;
> +static unsigned char PortData = 0;

don't explicitly init to zero... you were told this before :)

> +static int bit_pport_init(void)
> +{
> +	if (!request_region((base+2),1, "i2c (PPORT adapter)")) {
> +		return -ENODEV;	
> +	} else {
> +
> +		/* test for PPORT adap. 	*/
> +	
> +
> +		PortData=inb(base+2);
> +		PortData= (PortData SET_SDA) SET_SCL;
> +		outb(PortData,base+2);				
> +
> +		if (!(inb(base+2) | 0x06)) {	/* SDA and SCL will be high	*/
> +			DEBINIT(printk("i2c-pport.o: SDA and SCL was low.\n"));
> +			return -ENODEV;

leak, no release_region

> +		} else {
> +		
> +			/*SCL high and SDA low*/
> +			PortData = PortData SET_SCL CLR_SDA;
> +			outb(PortData,base+2);	
> +			schedule_timeout(400);

ugly... use a constant based on HZ

> +			if ( !(inb(base+2) | 0x4) ) {
> +				//outb(0x04,base+2);
> +				DEBINIT(printk("i2c-port.o: SDA was high.\n"));
> +				return -ENODEV;

likewise

> +static void bit_pport_inc_use(struct i2c_adapter *adap)
> +{
> +#ifdef MODULE
> +	MOD_INC_USE_COUNT;
> +#endif
> +}
> +
> +static void bit_pport_dec_use(struct i2c_adapter *adap)
> +{
> +#ifdef MODULE
> +	MOD_DEC_USE_COUNT;
> +#endif
> +}

remove the ifdefs... you were told this too :)

> +int __init i2c_bitpport_init(void)
> +{
> +	printk("i2c-pport.o: i2c Primitive parallel port adapter module version %s (%s)\n", I2C_VERSION, I2C_DATE);
> +
> +	if (base==0) {
> +		/* probe some values */
> +		base=DEFAULT_BASE;
> +		bit_pport_data.data=(void*)DEFAULT_BASE;
> +		if (bit_pport_init()==0) {
> +			if(i2c_bit_add_bus(&bit_pport_ops) < 0)
> +				return -ENODEV;

bug, no release_region

> +		} else {
> +			return -ENODEV;
> +		}
> +	} else {
> +		bit_pport_data.data=(void*)base;
> +		if (bit_pport_init()==0) {
> +			if(i2c_bit_add_bus(&bit_pport_ops) < 0)
> +				return -ENODEV;

likewise