Reading on /dev/cdrom crashes the kernel.
[2.] Full description of the problem/report:
When dd'ing from /dev/cdrom (managed) by ide-scsi, the kernel
reboots. Ooops was caught by kmsgdump.
[3.] Keywords (i.e., modules, networking, kernel):
ide-scsi cdrom ide oops
[4.] Kernel version (from /proc/version):
Linux version 2.4.19 (root@ceramic) (gcc version 2.95.4 20011002 (Debian prerelease)) #1 SMP Wed Aug 14 17:42:02 PDT 2002
[5.] Output of Oops.. message (if applicable) with symbolic information
resolved (see Documentation/oops-tracing.txt)
ksymoops 2.4.5 on i686 2.4.19. Options used
-V (default)
-k /proc/ksyms (default)
-l /proc/modules (default)
-o /lib/modules/2.4.19/ (default)
-m /boot/System.map-2.4.19 (default)
Warning: You did not tell me where to find symbol information. I will
assume that the log matches the kernel and modules that are running
right now and I'll use the default options above for symbol resolution.
If the current kernel and/or modules do not match the log, you can get
more accurate output by telling me the kernel version and where to find
map, modules, ksyms etc. ksymoops -h explains the options.
<1>Unable to handle kernel paging request at virtual address f6e8db63
<6>c68204e0
<1>*pde = 00000000
<6>Oops: 0002
<6>CPU: 0
<6>EIP: 0010:[<c68204e0>] Not tainted
Using defaults from ksymoops -t elf32-i386 -a i386
<6>EFLAGS: 00013202
<6>eax: 00000051 ebx: c089c000 ecx: c0305744 edx: 00000177
<6>esi: c11c3ac0 edi: f6e8db4b ebp: c03058d4 esp: c02a3f04
<6>ds: 0018 es: 0018 ss: 0018
<6>Process swapper (pid: 0, stackpage=c02a3000)
<6>Stack: c03058d4 c11fcd60 00003282 c0305744 00003002 c0305851 c01b002c c03058d4
<6> c117aa40 04000001 00000000 0000000f c682046c c010a394 0000000f c11fcd60
<6> c02a3f84 c02e7640 c02bc9e0 0000000f c02a3f7c c010a586 0000000f c02a3f84
<6>Call Trace: [<c01b002c>] [<c682046c>] [<c010a394>] [<c010a586>] [<c010caf8>]
<6> [<c0106c7c>] [<c68c8415>] [<c68c830c>] [<c0106c50>] [<c0106ce2>] [<c0105000>]
<6> [<c010504f>]
<6>Code: ff 47 18 8b 85 f0 00 00 00 8b 40 04 50 6a 01 e8 24 fd ff ff
>>EIP; c68204e0 <[ide-scsi]idescsi_pc_intr+74/23c> <=====
>>ebx; c089c000 <_end+587294/64ed294>
>>ecx; c0305744 <ide_hwifs+364/21e8>
>>esi; c11c3ac0 <_end+eaed54/64ed294>
>>edi; f6e8db4b <END_OF_CODE+30541cac/????>
>>ebp; c03058d4 <ide_hwifs+4f4/21e8>
>>esp; c02a3f04 <init_task_union+1f04/2000>
Trace; c01b002c <ide_intr+f8/164>
Trace; c682046c <[ide-scsi]idescsi_pc_intr+0/23c>
Trace; c010a394 <handle_IRQ_event+50/7c>
Trace; c010a586 <do_IRQ+a6/ec>
Trace; c010caf8 <call_do_IRQ+5/d>
Trace; c0106c7c <default_idle+2c/34>
Trace; c68c8415 <[apm]apm_cpu_idle+109/13c>
Trace; c68c830c <[apm]apm_cpu_idle+0/13c>
Trace; c0106c50 <default_idle+0/34>
Trace; c0106ce2 <cpu_idle+3e/54>
Trace; c0105000 <_stext+0/0>
Trace; c010504f <rest_init+4f/50>
Code; c68204e0 <[ide-scsi]idescsi_pc_intr+74/23c>
00000000 <_EIP>:
Code; c68204e0 <[ide-scsi]idescsi_pc_intr+74/23c> <=====
0: ff 47 18 incl 0x18(%edi) <=====
Code; c68204e3 <[ide-scsi]idescsi_pc_intr+77/23c>
3: 8b 85 f0 00 00 00 mov 0xf0(%ebp),%eax
Code; c68204e9 <[ide-scsi]idescsi_pc_intr+7d/23c>
9: 8b 40 04 mov 0x4(%eax),%eax
Code; c68204ec <[ide-scsi]idescsi_pc_intr+80/23c>
c: 50 push %eax
Code; c68204ed <[ide-scsi]idescsi_pc_intr+81/23c>
d: 6a 01 push $0x1
Code; c68204ef <[ide-scsi]idescsi_pc_intr+83/23c>
f: e8 24 fd ff ff call fffffd38 <_EIP+0xfffffd38> c6820218 <[ide-scsi]idescsi_end_request+0/254>
<6> <0>Kernel panic: Aiee, killing interrupt handler!
1+0 records in
1+0 records out
1 warning issued. Results may not be reliable.
[6.] A small shell script or example program which triggers the
problem (if possible)
dd bs=1k count=650000 < /dev/cdrom > /dev/null
[7.] Environment
[7.1.] Software (add the output of the ver_linux script here)
Debian GNU/Linux 3.0
If some fields are empty or look unusual you may have an old version.
Compare to the current minimal requirements in Documentation/Changes.
Linux electrolyt 2.4.19 #1 SMP Wed Aug 14 17:42:02 PDT 2002 i686 unknown
Gnu C 2.95.4
Gnu make 3.79.1
util-linux 2.11n
mount 2.11n
modutils 2.4.15
e2fsprogs 1.27
Linux C Library 2.2.5
Dynamic linker (ldd) 2.2.5
Procps 2.0.7
Net-tools 1.60
Console-tools 0.2.3
Sh-utils 2.0.11
Modules Loaded microcode mousedev input usb-uhci usbcore lvm-mod apm opl3 sb sb_lib uart401 isa-pnp sound soundcore nfsd nfs lockd sunrpc vfat msdos fat isofs sg sr_mod cdrom ide-scsi loop floppy 3c59x af_packet
[7.2.] Processor information (from /proc/cpuinfo):
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 5
model name : Celeron (Covington)
stepping : 0
cpu MHz : 267.275
cache size : 32 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr
bogomips : 532.48
[7.3.] Module information (from /proc/modules):
microcode 3744 0 (autoclean)
mousedev 3904 1
input 3232 0 [mousedev]
usb-uhci 21860 0 (unused)
usbcore 56544 1 [usb-uhci]
lvm-mod 61152 9
apm 9536 1
opl3 11080 0 (unused)
sb 7392 0 (unused)
sb_lib 33184 0 [sb]
uart401 6112 0 [sb_lib]
isa-pnp 27580 0 [sb]
sound 54124 0 [opl3 sb_lib uart401]
soundcore 3460 5 [sb_lib sound]
nfsd 66336 8
nfs 73564 5
lockd 47104 1 [nfsd nfs]
sunrpc 61428 1 [nfsd nfs lockd]
vfat 9276 0 (unused)
msdos 4796 0 (unused)
fat 29656 0 [vfat msdos]
isofs 17376 0 (unused)
sg 25252 0 (unused)
sr_mod 11576 0 (unused)
cdrom 28672 0 [sr_mod]
ide-scsi 7520 0
loop 8560 0
floppy 45952 0
3c59x 25544 1
af_packet 13128 0 (unused)
[7.4.] Loaded driver and hardware information (/proc/ioports, /proc/iomem)
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0070-007f : rtc
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
0213-0213 : isapnp read
0220-022f : soundblaster
02f8-02ff : serial(set)
0330-0333 : MPU-401 UART
0376-0376 : ide1
03c0-03df : vga+
03f6-03f6 : ide0
03f8-03ff : serial(set)
0a79-0a79 : isapnp write
0cf8-0cff : PCI conf1
4000-403f : Intel Corp. 82371AB/EB/MB PIIX4 ACPI
5000-501f : Intel Corp. 82371AB/EB/MB PIIX4 ACPI
6400-641f : Intel Corp. 82371AB/EB/MB PIIX4 USB
6400-641f : usb-uhci
6800-687f : 3Com Corporation 3c905C-TX/TX-M [Tornado]
6800-687f : 00:09.0
e000-efff : PCI Bus #01
f000-f00f : Intel Corp. 82371AB/EB/MB PIIX4 IDE
f000-f007 : ide0
f008-f00f : ide1
00000000-0009fbff : System RAM
0009fc00-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000c8000-000c87ff : Extension ROM
000f0000-000fffff : System ROM
00100000-05ffffff : System RAM
00100000-0022ba21 : Kernel code
0022ba22-002a02bf : Kernel data
a8000000-afffffff : PCI Bus #01
d8000000-dfffffff : PCI Bus #01
e0000000-e3ffffff : Intel Corp. 440LX/EX - 82443LX/EX Host bridge
e4000000-e7ffffff : S3 Inc. ViRGE/DX or /GX
e8000000-e800007f : 3Com Corporation 3c905C-TX/TX-M [Tornado]
ffff0000-ffffffff : reserved
[7.5.] PCI information ('lspci -vvv' as root)
00:00.0 Host bridge: Intel Corp. 440LX/EX - 82443LX/EX Host bridge (rev 03)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 64
Region 0: Memory at e0000000 (32-bit, prefetchable) [size=64M]
Capabilities: [a0] AGP version 1.0
Status: RQ=31 SBA+ 64bit- FW- Rate=x1,x2
Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>
00:01.0 PCI bridge: Intel Corp. 440LX/EX - 82443LX/EX AGP bridge (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: d8000000-dfffffff
Prefetchable memory behind bridge: a8000000-afffffff
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
00:07.0 ISA bridge: Intel Corp. 82371AB PIIX4 ISA (rev 01)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:07.1 IDE interface: Intel Corp. 82371AB PIIX4 IDE (rev 01) (prog-if 80 [Master])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Region 4: I/O ports at f000 [size=16]
00:07.2 USB Controller: Intel Corp. 82371AB PIIX4 USB (rev 01) (prog-if 00 [UHCI])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Interrupt: pin D routed to IRQ 11
Region 4: I/O ports at 6400 [size=32]
00:07.3 Bridge: Intel Corp. 82371AB PIIX4 ACPI (rev 01)
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin ? routed to IRQ 9
00:09.0 Ethernet controller: 3Com Corporation 3c905C-TX [Fast Etherlink] (rev 74)
Subsystem: 3Com Corporation 3C905C-TX Fast Etherlink for PC Management NIC
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (2500ns min, 2500ns max), cache line size 08
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at 6800 [size=128]
Region 1: Memory at e8000000 (32-bit, non-prefetchable) [size=128]
Expansion ROM at <unassigned> [disabled] [size=128K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=2 PME-
00:0b.0 VGA compatible controller: S3 Inc. ViRGE/DX or /GX (rev 01) (prog-if 00 [VGA])
Subsystem: S3 Inc. ViRGE/DX
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (1000ns min, 63750ns max)
Interrupt: pin A routed to IRQ 11
Region 0: Memory at e4000000 (32-bit, non-prefetchable) [size=64M]
Expansion ROM at <unassigned> [disabled] [size=64K]
[7.6.] SCSI information (from /proc/scsi/scsi)
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: Model: ATAPI CDROM Rev: 1.20
Type: CD-ROM ANSI SCSI revision: 0
[7.7.] Other information that might be relevant to the problem
(please look in /proc and include all information that you
think to be relevant):
N/A
[X.] Other notes, patches, fixes, workarounds:
Vanilla 2.4.19 plus kmsgdump patches.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/