I am attempting to do DV-ediiting under Linux. Capture, Edit work OK but
trying to get it back to my camera persistently fails. I get the following
message from both Kino 0.51 and MainConcept's madvout programs:
VIDEO1394_TALK_CHANNEL: Bad address
The following appears in dmesg:
kernel BUG at vmalloc.c:236!
invalid operand: 0000
CPU: 0
EIP: 1010:[<c012a997>] Not tainted
EFLAGS: 00210246
eax: 00000000 ebx: 00000000 ecx: 00000000 edx: d20ddbfc
esi: 00000200 edi: d20ddc1c ebp: c6a0fe5c esp: c6a0fe2c
ds: 1018 es: 1018 ss: 1018
Process madvout (pid: 2750, stackpage=c6a0f000)
Stack: 00000000 00000200 d20ddc1c c02c8d5f 00000000 00000000 00000010 fffffffe
00000000 00000041 000031b5 d1df7f7c c6a0fe7c e21f8085 00000000 000001f2
00000163 d20ddb80 00000200 d20ddc1c c6a0fea0 e21f82f8 00000000 bffdb808
Call Trace: [<e21f8085>] [<e21f82f8>] [<c0117318>] [<e21f949b>]
[<c013a8d1>]
[<c013b21c>] [<c013a829>] [<c013bacb>] [<c01316af>] [<c01315bf>]
[<c013e679>]
[<c01099fb>]
Code: 0f 0b ec 00 20 1b 24 c0 e9 65 01 00 00 6a 02 53 e8 94 fe ff
mask: 8000000000000000 usage: 8000000000000000
System Information follows. Sure hope you can give me some pointers - non
NULLthat is ;)
Thanks
Martin Knott
/proc/version
------------------
Linux version 2.4.19-win4lin-200209181 (root@clapham) (gcc version 2.95.3
20010315 (SuSE)) #1 Wed Sep 18 23:22:57 BST 2002
/proc/cpuinfo
------------------
processor : 0
vendor_id : AuthenticAMD
cpu family : 6
model : 4
model name : AMD Athlon(tm) Processor
stepping : 4
cpu MHz : 1400.088
cache size : 256 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov
pat pse36 mmx fxsr syscall mmxext 3dnowext 3dnow
bogomips : 2791.83
/proc/modules
--------------------
video1394 13040 1
ohci1394 16304 0 [video1394]
lt_serial 19744 2 (autoclean)
lt_modem 314464 0 (autoclean) [lt_serial]
raw1394 6800 0
ieee1394 29520 0 [video1394 ohci1394 raw1394]
soundcore 3408 0 (autoclean)
Mvnetd 8676 1 (unused)
Mvnet 51968 0 [Mvnetd]
Mvnetint 216 0 (unused)
Mvw 4172 0 (unused)
Mvmouse 704 0 (unused)
Mvkbd 824 0 (unused)
Mvgic 3160 0 (unused)
Mvdsp 904 0 (unused)
Mserial 5724 0 (unused)
Mmpip 6796 0 (unused)
Mmerge 128636 0 [Mvnetd Mvnet Mvw Mvmouse Mvkbd Mvgic Mvdsp
Mserial Mmpip]
mki-adapter 20720 0 [Mvnetd Mvnet Mvnetint Mvw Mvmouse Mvkbd
Mvgic
Mvdsp Mserial Mmpip Mmerge]
mga 101120 1
agpgart 31744 3 (autoclean)
usb-storage 77584 0 (autoclean) (unused)
/proc/ioports
------------------
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
02f8-02ff : serial(auto)
0376-0376 : ide1
0378-037a : parport0
03c0-03df : vga+
03f6-03f6 : ide0
03f8-03ff : serial(auto)
0cf8-0cff : PCI conf1
9000-9fff : PCI Bus #01
c400-c41f : VIA Technologies, Inc. UHCI USB
c400-c41f : usb-uhci
c800-c81f : VIA Technologies, Inc. UHCI USB (#2)
c800-c81f : usb-uhci
cc00-ccff : Realtek Semiconductor Co., Ltd. RTL-8139/8139C
cc00-ccff : 8139too
d000-d01f : Creative Labs SB Audigy
d400-d4ff : Lucent Microelectronics LT WinModem
d400-d4ff : ltserial
d800-d807 : Lucent Microelectronics LT WinModem
dc00-dc07 : Creative Labs SB Audigy MIDI/Game port
ff00-ff0f : VIA Technologies, Inc. Bus Master IDE
ff00-ff07 : ide0
ff08-ff0f : ide1
/proc/iomem
------------------
00000000-0009fbff : System RAM
0009fc00-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000f0000-000fffff : System ROM
00100000-1ffeffff : System RAM
00100000-0023b9c8 : Kernel code
0023b9c9-002af67f : Kernel data
1fff0000-1fff7fff : ACPI Tables
1fff8000-1fffffff : ACPI Non-volatile Storage
dac00000-decfffff : PCI Bus #01
dc000000-ddffffff : Matrox Graphics, Inc. MGA G400 AGP
dee00000-dfefffff : PCI Bus #01
df000000-df7fffff : Matrox Graphics, Inc. MGA G400 AGP
dfefc000-dfefffff : Matrox Graphics, Inc. MGA G400 AGP
dfff8000-dfffbfff : Creative Labs SB Audigy FireWire Port
dffff000-dffff7ff : Creative Labs SB Audigy FireWire Port
dffff000-dffff7ff : ohci1394
dffffe00-dffffeff : Realtek Semiconductor Co., Ltd. RTL-8139/8139C
dffffe00-dffffeff : 8139too
dfffff00-dfffffff : Lucent Microelectronics LT WinModem
e0000000-e0ffffff : VIA Technologies, Inc. VT8367 [KT266]
fec00000-fec00fff : reserved
fee00000-fee00fff : reserved
fff80000-ffffffff : reserved
lspci -vvv
-------------
00:00.0 Host bridge: VIA Technologies, Inc. VT8367 [KT266]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR-
Latency: 8
Region 0: Memory at e0000000 (32-bit, prefetchable) [size=16M]
Capabilities: [a0] AGP version 2.0
Status: RQ=31 SBA+ 64bit- FW- Rate=x1,x2
Command: RQ=0 SBA+ AGP+ 64bit- FW- Rate=x1
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:01.0 PCI bridge: VIA Technologies, Inc. VT8367 [KT266 AGP] (prog-if 00
[Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00009000-00009fff
Memory behind bridge: dee00000-dfefffff
Prefetchable memory behind bridge: dac00000-decfffff
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0a.0 Communication controller: Lucent Microelectronics LT WinModem (rev 02)
Subsystem: Digitan Systems Inc: Unknown device 9300
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (63000ns min, 3500ns max)
Interrupt: pin A routed to IRQ 10
Region 0: Memory at dfffff00 (32-bit, non-prefetchable) [size=256]
Region 1: I/O ports at d800 [size=8]
Region 2: I/O ports at d400 [size=256]
Capabilities: [f8] Power Management version 2
Flags: PMEClk- DSI+ D1- D2+ AuxCurrent=0mA
PME(D0-,D1-,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0b.0 Multimedia audio controller: Creative Labs: Unknown device 0004 (rev
03) Subsystem: Creative Labs: Unknown device 0051
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (500ns min, 5000ns max)
Interrupt: pin A routed to IRQ 12
Region 0: I/O ports at d000 [size=32]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0b.1 Input device controller: Creative Labs: Unknown device 7003 (rev 03)
Subsystem: Creative Labs: Unknown device 0040
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Region 0: I/O ports at dc00 [size=8]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0b.2 FireWire (IEEE 1394): Creative Labs: Unknown device 4001 (prog-if 10
[OHCI])
Subsystem: Creative Labs: Unknown device 0010
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (500ns min, 1000ns max), cache line size 08
Interrupt: pin B routed to IRQ 11
Region 0: Memory at dffff000 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at dfff8000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME+
00:0d.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139 (rev 10)
Subsystem: Realtek Semiconductor Co., Ltd. RT8139
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 5
Region 0: I/O ports at cc00 [size=256]
Region 1: Memory at dffffe00 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
PME(D0-,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:11.0 ISA bridge: VIA Technologies, Inc.: Unknown device 3147
Subsystem: VIA Technologies, Inc.: Unknown device 3074
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping+ SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:11.1 IDE interface: VIA Technologies, Inc. Bus Master IDE (rev 06)
(prog-if 8a [Master SecP PriP])
Subsystem: VIA Technologies, Inc. Bus Master IDE
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Interrupt: pin A routed to IRQ 14
Region 4: I/O ports at ff00 [size=16]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:11.2 USB Controller: VIA Technologies, Inc. UHCI USB (rev 23) (prog-if 00
[UHCI])
Subsystem: Unknown device 0925:1234
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32, cache line size 08
Interrupt: pin D routed to IRQ 12
Region 4: I/O ports at c400 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:11.3 USB Controller: VIA Technologies, Inc. UHCI USB (rev 23) (prog-if 00
[UHCI])
Subsystem: Unknown device 0925:1234
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32, cache line size 08
Interrupt: pin D routed to IRQ 12
Region 4: I/O ports at c800 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
01:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G400 AGP (rev
82) (prog-if 00 [VGA])
Subsystem: Matrox Graphics, Inc.: Unknown device 0543
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (4000ns min, 8000ns max), cache line size 08
Interrupt: pin A routed to IRQ 11
Region 0: Memory at dc000000 (32-bit, prefetchable) [size=32M]
Region 1: Memory at dfefc000 (32-bit, non-prefetchable) [size=16K]
Region 2: Memory at df000000 (32-bit, non-prefetchable) [size=8M]
Expansion ROM at dfec0000 [disabled] [size=128K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [f0] AGP version 2.0
Status: RQ=31 SBA+ 64bit- FW- Rate=x1,x2
Command: RQ=31 SBA+ AGP+ 64bit- FW- Rate=x1
/proc/scsi/scsi
--------------------
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: GENERIC Model: CRD-BP1500P Rev: 6z34
Type: CD-ROM ANSI SCSI revision: 02
/proc/interrupts
---------------------
CPU0
0: 363653 XT-PIC timer
1: 8075 XT-PIC keyboard
2: 0 XT-PIC cascade
5: 159 XT-PIC eth0
10: 1693970 XT-PIC ltserial
11: 394 XT-PIC ohci1394
12: 71160 XT-PIC usb-uhci, usb-uhci
14: 673380 XT-PIC ide0
15: 20691 XT-PIC ide1
NMI: 0
ERR: 0
/proc/meminfo
--------------------
total: used: free: shared: buffers: cached:
Mem: 528637952 455442432 73195520 0 7544832 327790592
Swap: 139788288 0 139788288
MemTotal: 516248 kB
MemFree: 71480 kB
MemShared: 0 kB
Buffers: 7368 kB
Cached: 320108 kB
SwapCached: 0 kB
Active: 49368 kB
Inactive: 353460 kB
HighTotal: 0 kB
HighFree: 0 kB
LowTotal: 516248 kB
LowFree: 71480 kB
SwapTotal: 136512 kB
SwapFree: 136512 kB
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/