[Patch]Backport 82801CAM IDE support to 2.4.x

Hu Gang (hugang@soulinfo.com)
Sun, 22 Sep 2002 13:48:22 +0800


--=.EM,KbW0ATy+ell
Content-Type: multipart/mixed;
boundary="Multipart_Sun__22_Sep_2002_13:48:22_+0800_084dbf80"

--Multipart_Sun__22_Sep_2002_13:48:22_+0800_084dbf80
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: 7bit

Hello all:

At Thu, 12 Sep 2002 09:19:29 +0800, I sended this patch, Now it works fine in my machine. It make faster(~5X) than without it. Please apply.

@@@@@@@@@@@@@@@@ with patch @@@@@@@@@@@@@@
# hdparm -t /dev/hda
/dev/hda:
Timing buffered disk reads: 64 MB in 15.76 seconds = 4.06 MB/sec
# dmesg
*** Snip ****
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH3M: IDE controller on PCI bus 00 dev f9
PCI: Device 00:1f.1 not available because of resource collisions
ICH3M: (ide_setup_pci_device:) Could not enable device.
*** Snip ****

@@@@@@@@@@@@@@@@ with patch @@@@@@@@@@@@@@@@@@
# hdparm -t /dev/hda
/dev/hda:
Timing buffered disk reads: 64 MB in 3.29 seconds = 19.45 MB/sec
# dmesg
**** Snip ***

ICH3M: IDE controller on PCI bus 00 dev f9
PCI: Enabling device 00:1f.1 (0005 -> 0007)
PCI: Assigned IRQ 5 for device 00:1f.1
ICH3M: chipset revision 2
***** Snip *****
(thanks for Frederic Garzon <garz@free.fr> reported)

I we can add it into 2.4.X kernel. here is it again.
----------------------------------------------

-- 
		- Hu Gang

--Multipart_Sun__22_Sep_2002_13:48:22_+0800_084dbf80 Content-Type: text/plain; name="ich3m.diff" Content-Disposition: attachment; filename="ich3m.diff" Content-Transfer-Encoding: 7bit

--- linux.old/drivers/ide/ide-pci.c Sun Sep 22 13:45:13 2002 +++ linux/drivers/ide/ide-pci.c Wed Sep 11 13:44:27 2002 @@ -951,6 +951,42 @@ ide_setup_pci_device(dev2, d2); } +inline void ide_register_xp_fix(struct pci_dev *dev) +{ + int i; + unsigned short cmd; + unsigned long flags; + unsigned long base_address[4] = { 0x1f0, 0x3f4, 0x170, 0x374 }; + + local_irq_save(flags); + pci_read_config_word(dev, PCI_COMMAND, &cmd); + pci_write_config_word(dev, PCI_COMMAND, cmd & ~PCI_COMMAND_IO); + for (i=0; i<4; i++) { + dev->resource[i].start = 0; + dev->resource[i].end = 0; + dev->resource[i].flags = 0; + } + for (i=0; i<4; i++) { + dev->resource[i].start = base_address[i]; + dev->resource[i].flags |= PCI_BASE_ADDRESS_SPACE_IO; + pci_write_config_dword(dev, + (PCI_BASE_ADDRESS_0 + (i * 4)), + dev->resource[i].start); + } + pci_write_config_word(dev, PCI_COMMAND, cmd); + local_irq_restore(flags); +} + +void __init fixup_device_piix (struct pci_dev *dev, ide_pci_device_t *d) +{ + if (dev->resource[0].start != 0x01F1) + ide_register_xp_fix(dev); + printk("%s: IDE controller on PCI bus %02x dev %02x\n", + d->name, dev->bus->number, dev->devfn); + ide_setup_pci_device(dev, d); + +} + /* * ide_scan_pcibus() gets invoked at boot time from ide.c. * It finds all PCI IDE controllers and calls ide_setup_pci_device for them. @@ -977,6 +1013,8 @@ hpt366_device_order_fixup(dev, d); else if (IDE_PCI_DEVID_EQ(d->devid, DEVID_PDC20270)) pdc20270_device_order_fixup(dev, d); + else if (IDE_PCI_DEVID_EQ(d->devid, DEVID_ICH3M)) + fixup_device_piix(dev, d); else if (!IDE_PCI_DEVID_EQ(d->devid, IDE_PCI_DEVID_NULL) || (dev->class >> 8) == PCI_CLASS_STORAGE_IDE) { if (IDE_PCI_DEVID_EQ(d->devid, IDE_PCI_DEVID_NULL)) printk("%s: unknown IDE controller on PCI bus %02x device %02x, VID=%04x, DID=%04x\n",

--Multipart_Sun__22_Sep_2002_13:48:22_+0800_084dbf80--

--=.EM,KbW0ATy+ell Content-Type: application/pgp-signature

-----BEGIN PGP SIGNATURE----- Version: GnuPG v1.0.7 (GNU/Linux)

iD8DBQE9jVmmPM4uCy7bAJgRAqcIAJ0YWZ4Vy+4Q5P8N2d4NM7UX3LNIWACdFnLC RFYpM3RV7t+IDlWrJseVV50= =Xr19 -----END PGP SIGNATURE-----

--=.EM,KbW0ATy+ell-- - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/