CPUFreq i386 drivers for 2.5.35:
arch/i386/config.in Necessary config options
arch/i386/kernel/cpu/Makefile allow for compilation of the CPUFreq subdir=
ectory
arch/i386/kernel/cpu/cpufreq/Makefile Makefile for CPUFreq drivers
arch/i386/kernel/cpu/cpufreq/elanfreq.c CPUFreq driver for AMD Elan proces=
sors
arch/i386/kernel/cpu/cpufreq/longhaul.c CPUFreq driver for VIA Longhaul pr=
ocessors
arch/i386/kernel/cpu/cpufreq/longrun.c CPUFreq driver for Transmeta Crusoe=
processors
arch/i386/kernel/cpu/cpufreq/p4-clockmod.c CPUFreq driver for Pentium 4 Xeo=
n processors (using clock modulation)
arch/i386/kernel/cpu/cpufreq/powernow-k6.c CPUFreq driver for mobile AMD K6=
-2+ and mobile AMD K6-3+ processors
arch/i386/kernel/cpu/cpufreq/speedstep.c CPUFreq drivers for ICH2-M and ICH=
3-M chipsets and Intel Pentium 3-M and 4-M processors.
diff -ruN linux-2535original/arch/i386/config.in linux/arch/i386/config.in
--- linux-2535original/arch/i386/config.in Tue Sep 17 09:25:17 2002
+++ linux/arch/i386/config.in Tue Sep 17 10:02:14 2002
@@ -190,6 +190,18 @@
dep_bool 'Check for non-fatal errors on Athlon/Duron' CONFIG_X86_MCE_NONFA=
TAL $CONFIG_X86_MCE
dep_bool 'check for P4 thermal throttling interrupt.' CONFIG_X86_MCE_P4THE=
RMAL $CONFIG_X86_MCE $CONFIG_X86_UP_APIC
=20
+bool 'CPU Frequency scaling' CONFIG_CPU_FREQ
+if [ "$CONFIG_CPU_FREQ" =3D "y" ]; then
+ define_bool CONFIG_CPU_FREQ_26_API y
+ tristate ' AMD Mobile K6-2/K6-3 PowerNow!' CONFIG_X86_POWERNOW_K6
+ if [ "$CONFIG_MELAN" =3D "y" ]; then
+ tristate ' AMD Elan' CONFIG_ELAN_CPUFREQ
+ fi
+ tristate ' VIA Cyrix III Longhaul' CONFIG_X86_LONGHAUL
+ tristate ' Intel Speedstep' CONFIG_X86_SPEEDSTEP
+ tristate ' Intel Pentium 4 clock modulation' CONFIG_X86_P4_CLOCKMOD
+ tristate ' Transmeta LongRun' CONFIG_X86_LONGRUN
+fi
=20
tristate 'Toshiba Laptop support' CONFIG_TOSHIBA
tristate 'Dell laptop support' CONFIG_I8K
diff -ruN linux-2535original/arch/i386/kernel/cpu/Makefile linux/arch/i386/=
kernel/cpu/Makefile
--- linux-2535original/arch/i386/kernel/cpu/Makefile Tue Sep 17 09:22:43 20=
02
+++ linux/arch/i386/kernel/cpu/Makefile Tue Sep 17 09:34:25 2002
@@ -15,4 +15,9 @@
=20
obj-$(CONFIG_MTRR) +=3D mtrr/
=20
+ifdef CONFIG_CPU_FREQ
+obj-y +=3D cpufreq/
+obj-m +=3D cpufreq/
+endif
+
include $(TOPDIR)/Rules.make
diff -ruN linux-2535original/arch/i386/kernel/cpu/cpufreq/Makefile linux/ar=
ch/i386/kernel/cpu/cpufreq/Makefile
--- linux-2535original/arch/i386/kernel/cpu/cpufreq/Makefile Thu Jan 1 01:=
00:00 1970
+++ linux/arch/i386/kernel/cpu/cpufreq/Makefile Tue Sep 17 09:35:42 2002
@@ -0,0 +1,10 @@
+O_TARGET :=3D built-in.o
+
+obj-$(CONFIG_X86_POWERNOW_K6) +=3D powernow-k6.o
+obj-$(CONFIG_X86_LONGHAUL) +=3D longhaul.o
+obj-$(CONFIG_X86_SPEEDSTEP) +=3D speedstep.o
+obj-$(CONFIG_X86_P4_CLOCKMOD) +=3D p4-clockmod.o
+obj-$(CONFIG_ELAN_CPUFREQ) +=3D elanfreq.o
+obj-$(CONFIG_X86_LONGRUN) +=3D longrun.o =20
+
+include $(TOPDIR)/Rules.make
diff -ruN linux-2535original/arch/i386/kernel/cpu/cpufreq/elanfreq.c linux/=
arch/i386/kernel/cpu/cpufreq/elanfreq.c
--- linux-2535original/arch/i386/kernel/cpu/cpufreq/elanfreq.c Thu Jan 1 0=
1:00:00 1970
+++ linux/arch/i386/kernel/cpu/cpufreq/elanfreq.c Tue Sep 17 09:35:10 2002
@@ -0,0 +1,336 @@
+/*
+ * elanfreq: cpufreq driver for the AMD ELAN family
+ *
+ * (c) Copyright 2002 Robert Schwebel <r.schwebel@pengutronix.de>
+ *
+ * Parts of this code are (c) Sven Geggus <sven@geggus.net>=20
+ *
+ * All Rights Reserved.=20
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.=20
+ *
+ * 2002-02-13: - initial revision for 2.4.18-pre9 by Robert Schwebel
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/cpufreq.h>
+
+#include <asm/msr.h>
+#include <asm/timex.h>
+#include <asm/io.h>
+
+#define REG_CSCIR 0x22 /* Chip Setup and Control Index Register */
+#define REG_CSCDR 0x23 /* Chip Setup and Control Data Register */
+
+#define SAFE_FREQ 33000 /* every Elan CPU can run at 33 MHz */
+
+static struct cpufreq_driver *elanfreq_driver;
+
+/* Module parameter */
+static int max_freq;
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Robert Schwebel <r.schwebel@pengutronix.de>, Sven Geggus <s=
ven@geggus.net>");
+MODULE_DESCRIPTION("cpufreq driver for AMD's Elan CPUs");
+
+struct s_elan_multiplier {
+ int clock; /* frequency in kHz */
+ int val40h; /* PMU Force Mode register */
+ int val80h; /* CPU Clock Speed Register */
+};
+
+/*
+ * It is important that the frequencies=20
+ * are listed in ascending order here!
+ */
+struct s_elan_multiplier elan_multiplier[] =3D {
+ {1000, 0x02, 0x18},
+ {2000, 0x02, 0x10},
+ {4000, 0x02, 0x08},
+ {8000, 0x00, 0x00},
+ {16000, 0x00, 0x02},
+ {33000, 0x00, 0x04},
+ {66000, 0x01, 0x04},
+ {99000, 0x01, 0x05}
+};
+
+
+/**
+ * elanfreq_get_cpu_frequency: determine current cpu speed
+ *
+ * Finds out at which frequency the CPU of the Elan SOC runs
+ * at the moment. Frequencies from 1 to 33 MHz are generated=20
+ * the normal way, 66 and 99 MHz are called "Hyperspeed Mode"
+ * and have the rest of the chip running with 33 MHz.=20
+ */
+
+static unsigned int elanfreq_get_cpu_frequency(void)
+{
+ u8 clockspeed_reg; /* Clock Speed Register */
+=09
+ local_irq_disable();
+ outb_p(0x80,REG_CSCIR);
+ clockspeed_reg =3D inb_p(REG_CSCDR);
+ local_irq_enable();
+
+ if ((clockspeed_reg & 0xE0) =3D=3D 0xE0) { return 0; }
+
+ /* Are we in CPU clock multiplied mode (66/99 MHz)? */
+ if ((clockspeed_reg & 0xE0) =3D=3D 0xC0) {
+ if ((clockspeed_reg & 0x01) =3D=3D 0) {
+ return 66000;
+ } else {
+ return 99000; =20
+ }
+ }
+
+ /* 33 MHz is not 32 MHz... */
+ if ((clockspeed_reg & 0xE0)=3D=3D0xA0)
+ return 33000;
+
+ return ((1<<((clockspeed_reg & 0xE0) >> 5)) * 1000);
+}
+
+
+/**
+ * elanfreq_set_cpu_frequency: Change the CPU core frequency
+ * @cpu: cpu number
+ * @freq: frequency in kHz
+ *
+ * This function takes a frequency value and changes the CPU frequenc=
y=20
+ * according to this. Note that the frequency has to be checked by
+ * elanfreq_validatespeed() for correctness!
+ *=09
+ * There is no return value.=20
+ */
+
+static void elanfreq_set_cpu_state (unsigned int state) {
+
+ struct cpufreq_freqs freqs;
+
+ if (!elanfreq_driver) {
+ printk(KERN_ERR "cpufreq: initialization problem or invalid target frequ=
ency\n");
+ return;
+ }
+
+ freqs.old =3D elanfreq_get_cpu_frequency();
+ freqs.new =3D elan_multiplier[state].clock;
+ freqs.cpu =3D CPUFREQ_ALL_CPUS; /* elanfreq.c is UP only driver */
+=09
+ cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+
+ printk(KERN_INFO "elanfreq: attempting to set frequency to %i kHz\n",elan=
_multiplier[state].clock);
+
+
+ /*=20
+ * Access to the Elan's internal registers is indexed via =20
+ * 0x22: Chip Setup & Control Register Index Register (CSCI)=20
+ * 0x23: Chip Setup & Control Register Data Register (CSCD)=20
+ *
+ */
+
+ /*=20
+ * 0x40 is the Power Management Unit's Force Mode Register.=20
+ * Bit 6 enables Hyperspeed Mode (66/100 MHz core frequency)
+ */
+
+ local_irq_disable();
+ outb_p(0x40,REG_CSCIR); /* Disable hyperspeed mode */
+ outb_p(0x00,REG_CSCDR);
+ local_irq_enable(); /* wait till internal pipelines and */
+ udelay(1000); /* buffers have cleaned up */
+
+ local_irq_disable();
+
+ /* now, set the CPU clock speed register (0x80) */
+ outb_p(0x80,REG_CSCIR);
+ outb_p(elan_multiplier[state].val80h,REG_CSCDR);
+
+ /* now, the hyperspeed bit in PMU Force Mode Register (0x40) */
+ outb_p(0x40,REG_CSCIR);
+ outb_p(elan_multiplier[state].val40h,REG_CSCDR);
+ udelay(10000);
+ local_irq_enable();
+
+ cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+};
+
+
+/**
+ * elanfreq_validatespeed: test if frequency range is valid=20
+ *
+ * This function checks if a given frequency range in kHz is valid=20
+ * for the hardware supported by the driver.=20
+ */
+
+static void elanfreq_verify (struct cpufreq_policy *policy)
+{
+ unsigned int number_states =3D 0;
+ unsigned int i;
+
+ if (!policy || !max_freq)
+ return;
+
+ policy->cpu =3D 0;
+
+ cpufreq_verify_within_limits(policy, 1000, max_freq);
+
+ for (i=3D(sizeof(elan_multiplier)/sizeof(struct s_elan_multiplier) - 1); =
i>=3D0; i--)
+ if ((elan_multiplier[i].clock >=3D policy->min) &&
+ (elan_multiplier[i].clock <=3D policy->max))
+ number_states++;
+
+ if (number_states)
+ return;
+
+ for (i=3D(sizeof(elan_multiplier)/sizeof(struct s_elan_multiplier) - 1); =
i>=3D0; i--)
+ if (elan_multiplier[i].clock < policy->max)
+ break;
+
+ policy->max =3D elan_multiplier[i+1].clock;
+
+ return;
+}
+
+static void elanfreq_setpolicy (struct cpufreq_policy *policy)
+{
+ unsigned int number_states =3D 0;
+ unsigned int i, j=3D4;
+
+ if (!elanfreq_driver)
+ return;
+
+ for (i=3D(sizeof(elan_multiplier)/sizeof(struct s_elan_multiplier) - 1); =
i>=3D0; i--)
+ if ((elan_multiplier[i].clock >=3D policy->min) &&
+ (elan_multiplier[i].clock <=3D policy->max))
+ {
+ number_states++;
+ j =3D i;
+ }
+
+ if (number_states =3D=3D 1) {
+ elanfreq_set_cpu_state(j);
+ return;
+ }
+
+ switch (policy->policy) {
+ case CPUFREQ_POLICY_POWERSAVE:
+ for (i=3D(sizeof(elan_multiplier)/sizeof(struct s_elan_multiplier) - 1);=
i>=3D0; i--)
+ if ((elan_multiplier[i].clock >=3D policy->min) &&
+ (elan_multiplier[i].clock <=3D policy->max))
+ j =3D i;
+ break;
+ case CPUFREQ_POLICY_PERFORMANCE:
+ for (i=3D0; i<(sizeof(elan_multiplier)/sizeof(struct s_elan_multiplier) =
- 1); i++)
+ if ((elan_multiplier[i].clock >=3D policy->min) &&
+ (elan_multiplier[i].clock <=3D policy->max))
+ j =3D i;
+ break;
+ default:
+ return;
+ }
+
+ if (elan_multiplier[j].clock > max_freq)
+ BUG();
+
+ elanfreq_set_cpu_state(j);
+ return;
+}
+
+
+/*
+ * Module init and exit code
+ */
+
+#ifndef MODULE
+/**
+ * elanfreq_setup - elanfreq command line parameter parsing
+ *
+ * elanfreq command line parameter. Use:
+ * elanfreq=3D66000
+ * to set the maximum CPU frequency to 66 MHz. Note that in
+ * case you do not give this boot parameter, the maximum
+ * frequency will fall back to _current_ CPU frequency which
+ * might be lower. If you build this as a module, use the
+ * max_freq module parameter instead.
+ */
+static int __init elanfreq_setup(char *str)
+{
+ max_freq =3D simple_strtoul(str, &str, 0);
+ return 1;
+}
+__setup("elanfreq=3D", elanfreq_setup);
+#endif
+
+static int __init elanfreq_init(void)=20
+{=09
+ struct cpuinfo_x86 *c =3D cpu_data;
+ struct cpufreq_driver *driver;
+ int ret;
+
+ /* Test if we have the right hardware */
+ if ((c->x86_vendor !=3D X86_VENDOR_AMD) ||
+ (c->x86 !=3D 4) || (c->x86_model!=3D10))
+ {
+ printk(KERN_INFO "elanfreq: error: no Elan processor found!\n");
+ return -ENODEV;
+ }
+=09
+ driver =3D kmalloc(sizeof(struct cpufreq_driver) +
+ NR_CPUS * sizeof(struct cpufreq_policy), GFP_KERNEL);
+ if (!driver)
+ return -ENOMEM;
+
+ driver->policy =3D (struct cpufreq_policy *) (driver + sizeof(struct cpuf=
req_driver));
+
+ if (!max_freq)
+ max_freq =3D elanfreq_get_cpu_frequency();
+
+#ifdef CONFIG_CPU_FREQ_24_API
+ driver->cpu_min_freq =3D 1000;
+ driver->cpu_cur_freq[0] =3D elanfreq_get_cpu_frequency();
+#endif
+
+ driver->verify =3D &elanfreq_verify;
+ driver->setpolicy =3D &elanfreq_setpolicy;
+
+ driver->policy[0].cpu =3D 0;
+ driver->policy[0].min =3D 1000;
+ driver->policy[0].max =3D max_freq;
+ driver->policy[0].policy =3D CPUFREQ_POLICY_PERFORMANCE;
+ driver->policy[0].max_cpu_freq =3D max_freq;
+
+ ret =3D cpufreq_register(driver);
+ if (ret) {
+ kfree(driver);
+ return ret;
+ }
+
+ elanfreq_driver =3D driver;
+
+ return 0;
+}
+
+
+static void __exit elanfreq_exit(void)=20
+{
+ if (elanfreq_driver) {
+ cpufreq_unregister();
+ kfree(elanfreq_driver);
+ }
+}
+
+module_init(elanfreq_init);
+module_exit(elanfreq_exit);
+
+MODULE_PARM (max_freq, "i");
+
diff -ruN linux-2535original/arch/i386/kernel/cpu/cpufreq/longhaul.c linux/=
arch/i386/kernel/cpu/cpufreq/longhaul.c
--- linux-2535original/arch/i386/kernel/cpu/cpufreq/longhaul.c Thu Jan 1 0=
1:00:00 1970
+++ linux/arch/i386/kernel/cpu/cpufreq/longhaul.c Tue Sep 17 09:35:18 2002
@@ -0,0 +1,820 @@
+/*
+ * $Id: longhaul.c,v 1.70 2002/09/12 10:22:17 db Exp $
+ *
+ * (C) 2001 Dave Jones. <davej@suse.de>
+ * (C) 2002 Padraig Brady. <padraig@antefacto.com>
+ *
+ * Licensed under the terms of the GNU GPL License version 2.
+ * Based upon datasheets & sample CPUs kindly provided by VIA.
+ *
+ * VIA have currently 3 different versions of Longhaul.
+ *
+ * +---------------------+----------+---------------------------------+
+ * | Marketing name | Codename | longhaul version / features. |
+ * +---------------------+----------+---------------------------------+
+ * | Samuel/CyrixIII | C5A | v1 : multipliers only |
+ * | Samuel2/C3 | C3E/C5B | v1 : multiplier only |
+ * | Ezra | C5C | v2 : multipliers & voltage |
+ * | Ezra-T | C5M/C5N | v3 : multipliers, voltage & FSB |
+ * +---------------------+----------+---------------------------------+
+ *
+ * BIG FAT DISCLAIMER: Work in progress code. Possibly *dangerous*
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>=20
+#include <linux/init.h>
+#include <linux/cpufreq.h>
+#include <linux/slab.h>
+
+#include <asm/msr.h>
+#include <asm/timex.h>
+#include <asm/io.h>
+
+#define DEBUG
+
+#ifdef DEBUG
+#define dprintk(msg...) printk(msg)
+#else
+#define dprintk(msg...) do { } while(0);
+#endif
+
+static int numscales=3D16, numvscales;
+static int minvid, maxvid;
+static int can_scale_voltage;
+static int can_scale_fsb;
+static int vrmrev;
+
+
+/* Module parameters */
+static int dont_scale_voltage;
+static int dont_scale_fsb;
+static int current_fsb;
+
+#define __hlt() __asm__ __volatile__("hlt": : :"memory")
+
+/*
+ * Clock ratio tables.
+ * The eblcr ones specify the ratio read from the CPU.
+ * The clock_ratio ones specify what to write to the CPU.
+ */
+
+/* VIA C3 Samuel 1 & Samuel 2 (stepping 0)*/
+static int __initdata longhaul1_clock_ratio[16] =3D {
+ -1, /* 0000 -> RESERVED */
+ 30, /* 0001 -> 3.0x */
+ 40, /* 0010 -> 4.0x */
+ -1, /* 0011 -> RESERVED */
+ -1, /* 0100 -> RESERVED */
+ 35, /* 0101 -> 3.5x */
+ 45, /* 0110 -> 4.5x */
+ 55, /* 0111 -> 5.5x */
+ 60, /* 1000 -> 6.0x */
+ 70, /* 1001 -> 7.0x */
+ 80, /* 1010 -> 8.0x */
+ 50, /* 1011 -> 5.0x */
+ 65, /* 1100 -> 6.5x */
+ 75, /* 1101 -> 7.5x */
+ -1, /* 1110 -> RESERVED */
+ -1, /* 1111 -> RESERVED */
+};
+
+static int __initdata samuel1_eblcr[16] =3D {
+ 50, /* 0000 -> RESERVED */
+ 30, /* 0001 -> 3.0x */
+ 40, /* 0010 -> 4.0x */
+ -1, /* 0011 -> RESERVED */
+ 55, /* 0100 -> 5.5x */
+ 35, /* 0101 -> 3.5x */
+ 45, /* 0110 -> 4.5x */
+ -1, /* 0111 -> RESERVED */
+ -1, /* 1000 -> RESERVED */
+ 70, /* 1001 -> 7.0x */
+ 80, /* 1010 -> 8.0x */
+ 60, /* 1011 -> 6.0x */
+ -1, /* 1100 -> RESERVED */
+ 75, /* 1101 -> 7.5x */
+ -1, /* 1110 -> RESERVED */
+ 65, /* 1111 -> 6.5x */
+};
+
+/* VIA C3 Samuel2 Stepping 1->15 & VIA C3 Ezra */
+static int __initdata longhaul2_clock_ratio[16] =3D {
+ 100, /* 0000 -> 10.0x */
+ 30, /* 0001 -> 3.0x */
+ 40, /* 0010 -> 4.0x */
+ 90, /* 0011 -> 9.0x */
+ 95, /* 0100 -> 9.5x */
+ 35, /* 0101 -> 3.5x */
+ 45, /* 0110 -> 4.5x */
+ 55, /* 0111 -> 5.5x */
+ 60, /* 1000 -> 6.0x */
+ 70, /* 1001 -> 7.0x */
+ 80, /* 1010 -> 8.0x */
+ 50, /* 1011 -> 5.0x */
+ 65, /* 1100 -> 6.5x */
+ 75, /* 1101 -> 7.5x */
+ 85, /* 1110 -> 8.5x */
+ 120, /* 1111 -> 12.0x */
+};
+
+static int __initdata samuel2_eblcr[16] =3D {
+ 50, /* 0000 -> 5.0x */
+ 30, /* 0001 -> 3.0x */
+ 40, /* 0010 -> 4.0x */
+ 100, /* 0011 -> 10.0x */
+ 55, /* 0100 -> 5.5x */
+ 35, /* 0101 -> 3.5x */
+ 45, /* 0110 -> 4.5x */
+ 110, /* 0111 -> 11.0x */
+ 90, /* 1000 -> 9.0x */
+ 70, /* 1001 -> 7.0x */
+ 80, /* 1010 -> 8.0x */
+ 60, /* 1011 -> 6.0x */
+ 120, /* 1100 -> 12.0x */
+ 75, /* 1101 -> 7.5x */
+ 130, /* 1110 -> 13.0x */
+ 65, /* 1111 -> 6.5x */
+};
+
+static int __initdata ezra_eblcr[16] =3D {
+ 50, /* 0000 -> 5.0x */
+ 30, /* 0001 -> 3.0x */
+ 40, /* 0010 -> 4.0x */
+ 100, /* 0011 -> 10.0x */
+ 55, /* 0100 -> 5.5x */
+ 35, /* 0101 -> 3.5x */
+ 45, /* 0110 -> 4.5x */
+ 95, /* 0111 -> 9.5x */
+ 90, /* 1000 -> 9.0x */
+ 70, /* 1001 -> 7.0x */
+ 80, /* 1010 -> 8.0x */
+ 60, /* 1011 -> 6.0x */
+ 120, /* 1100 -> 12.0x */
+ 75, /* 1101 -> 7.5x */
+ 85, /* 1110 -> 8.5x */
+ 65, /* 1111 -> 6.5x */
+};
+
+/* VIA C5M. */
+static int __initdata longhaul3_clock_ratio[32] =3D {
+ 100, /* 0000 -> 10.0x */
+ 30, /* 0001 -> 3.0x */
+ 40, /* 0010 -> 4.0x */
+ 90, /* 0011 -> 9.0x */
+ 95, /* 0100 -> 9.5x */
+ 35, /* 0101 -> 3.5x */
+ 45, /* 0110 -> 4.5x */
+ 55, /* 0111 -> 5.5x */
+ 60, /* 1000 -> 6.0x */
+ 70, /* 1001 -> 7.0x */
+ 80, /* 1010 -> 8.0x */
+ 50, /* 1011 -> 5.0x */
+ 65, /* 1100 -> 6.5x */
+ 75, /* 1101 -> 7.5x */
+ 85, /* 1110 -> 8.5x */
+ 120, /* 1111 -> 12.0x */
+
+ -1, /* 0000 -> RESERVED (10.0x) */
+ 110, /* 0001 -> 11.0x */
+ 120, /* 0010 -> 12.0x */
+ -1, /* 0011 -> RESERVED (9.0x)*/
+ 105, /* 0100 -> 10.5x */
+ 115, /* 0101 -> 11.5x */
+ 125, /* 0110 -> 12.5x */
+ 135, /* 0111 -> 13.5x */
+ 140, /* 1000 -> 14.0x */
+ 150, /* 1001 -> 15.0x */
+ 160, /* 1010 -> 16.0x */
+ 130, /* 1011 -> 13.0x */
+ 145, /* 1100 -> 14.5x */
+ 155, /* 1101 -> 15.5x */
+ -1, /* 1110 -> RESERVED (13.0x) */
+ -1, /* 1111 -> RESERVED (12.0x) */
+};
+
+static int __initdata c5m_eblcr[32] =3D {
+ 50, /* 0000 -> 5.0x */
+ 30, /* 0001 -> 3.0x */
+ 40, /* 0010 -> 4.0x */
+ 100, /* 0011 -> 10.0x */
+ 55, /* 0100 -> 5.5x */
+ 35, /* 0101 -> 3.5x */
+ 45, /* 0110 -> 4.5x */
+ 95, /* 0111 -> 9.5x */
+ 90, /* 1000 -> 9.0x */
+ 70, /* 1001 -> 7.0x */
+ 80, /* 1010 -> 8.0x */
+ 60, /* 1011 -> 6.0x */
+ 120, /* 1100 -> 12.0x */
+ 75, /* 1101 -> 7.5x */
+ 85, /* 1110 -> 8.5x */
+ 65, /* 1111 -> 6.5x */
+
+ -1, /* 0000 -> RESERVED (9.0x) */
+ 110, /* 0001 -> 11.0x */
+ 120, /* 0010 -> 12.0x */
+ -1, /* 0011 -> RESERVED (10.0x)*/
+ 135, /* 0100 -> 13.5x */
+ 115, /* 0101 -> 11.5x */
+ 125, /* 0110 -> 12.5x */
+ 105, /* 0111 -> 10.5x */
+ 130, /* 1000 -> 13.0x */
+ 150, /* 1001 -> 15.0x */
+ 160, /* 1010 -> 16.0x */
+ 140, /* 1011 -> 14.0x */
+ -1, /* 1100 -> RESERVED (12.0x) */
+ 155, /* 1101 -> 15.5x */
+ -1, /* 1110 -> RESERVED (13.0x) */
+ 145, /* 1111 -> 14.5x */
+};
+
+/* fsb values as defined in CPU */
+static unsigned int eblcr_fsb_table[] =3D { 66, 133, 100, -1 };
+/* fsb values to favour low fsb speed (lower power) */
+static unsigned int power_fsb_table[] =3D { 66, 100, 133, -1 };
+/* fsb values to favour high fsb speed (for e.g. if lowering CPU=20
+ freq because of heat, but want to maintain highest performance possible=
) */
+static unsigned int perf_fsb_table[] =3D { 133, 100, 66, -1 };
+static unsigned int *fsb_search_table;
+
+/* Voltage scales. Div by 1000 to get actual voltage. */
+static int __initdata vrm85scales[32] =3D {
+ 1250, 1200, 1150, 1100, 1050, 1800, 1750, 1700,
+ 1650, 1600, 1550, 1500, 1450, 1400, 1350, 1300,
+ 1275, 1225, 1175, 1125, 1075, 1825, 1775, 1725,
+ 1675, 1625, 1575, 1525, 1475, 1425, 1375, 1325,
+};
+
+static int __initdata mobilevrmscales[32] =3D {
+ 2000, 1950, 1900, 1850, 1800, 1750, 1700, 1650,
+ 1600, 1550, 1500, 1450, 1500, 1350, 1300, -1,
+ 1275, 1250, 1225, 1200, 1175, 1150, 1125, 1100,
+ 1075, 1050, 1025, 1000, 975, 950, 925, -1,
+};
+
+/* Clock ratios multiplied by 10 */
+static int clock_ratio[32];
+static int eblcr_table[32];
+static int voltage_table[32];
+static int highest_speed, lowest_speed; /* kHz */
+static int longhaul; /* version. */
+static struct cpufreq_driver *longhaul_driver;
+
+
+static int longhaul_get_cpu_fsb (void)
+{
+ unsigned long invalue=3D0,lo, hi;
+
+ if (current_fsb =3D=3D 0) {
+ rdmsr (MSR_IA32_EBL_CR_POWERON, lo, hi);
+ invalue =3D (lo & (1<<18|1<<19)) >>18;
+ return eblcr_fsb_table[invalue];
+ } else {
+ return current_fsb;
+ }
+}
+
+
+static int longhaul_get_cpu_mult (void)
+{
+ unsigned long invalue=3D0,lo, hi;
+
+ rdmsr (MSR_IA32_EBL_CR_POWERON, lo, hi);
+ invalue =3D (lo & (1<<22|1<<23|1<<24|1<<25)) >>22;
+ if (longhaul=3D=3D3) {
+ if (lo & (1<<27))
+ invalue+=3D16;
+ }
+ return eblcr_table[invalue];
+}
+
+
+/**
+ * longhaul_set_cpu_frequency()
+ * @clock_ratio_index : index of clock_ratio[] for new frequency
+ * @newfsb: the new FSB
+ *
+ * Sets a new clock ratio, and -if applicable- a new Front Side Bus
+ */
+
+static void longhaul_setstate (unsigned int clock_ratio_index, unsigned in=
t newfsb)
+{
+ unsigned long lo, hi;
+ unsigned int bits;
+ int revkey;
+ int vidindex, i;
+ struct cpufreq_freqs freqs;
+=09
+ if (!newfsb || (clock_ratio[clock_ratio_index] =3D=3D -1))
+ return;
+
+ if ((!can_scale_fsb) && (newfsb !=3D current_fsb))
+ return;
+
+ freqs.old =3D longhaul_get_cpu_mult() * longhaul_get_cpu_fsb() * 100;
+ freqs.new =3D clock_ratio[clock_ratio_index] * newfsb * 100;
+ freqs.cpu =3D CPUFREQ_ALL_CPUS; /* longhaul.c is UP only driver */
+=09
+ cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+
+ dprintk (KERN_INFO "longhaul: New FSB:%d Mult(x10):%d\n",
+ newfsb, clock_ratio[clock_ratio_index]);
+
+ bits =3D clock_ratio_index;
+ /* "bits" contains the bitpattern of the new multiplier.
+ we now need to transform it to the desired format. */
+
+ switch (longhaul) {
+ case 1:
+ rdmsr (MSR_VIA_BCR2, lo, hi);
+ revkey =3D (lo & 0xf)<<4; /* Rev key. */
+ lo &=3D ~(1<<23|1<<24|1<<25|1<<26);
+ lo |=3D (1<<19); /* Enable software clock multiplier */
+ lo |=3D (bits<<23); /* desired multiplier */
+ lo |=3D revkey;
+ wrmsr (MSR_VIA_BCR2, lo, hi);
+
+ __hlt();
+
+ /* Disable software clock multiplier */
+ rdmsr (MSR_VIA_BCR2, lo, hi);
+ lo &=3D ~(1<<19);
+ lo |=3D revkey;
+ wrmsr (MSR_VIA_BCR2, lo, hi);
+ break;
+
+ case 2:
+ rdmsr (MSR_VIA_LONGHAUL, lo, hi);
+ revkey =3D (lo & 0xf)<<4; /* Rev key. */
+ lo &=3D 0xfff0bf0f; /* reset [19:16,14](bus ratio) and [7:4](rev key) to=
0 */
+ lo |=3D (bits<<16);
+ lo |=3D (1<<8); /* EnableSoftBusRatio */
+ lo |=3D revkey;
+
+ if (can_scale_voltage) {
+ if (can_scale_fsb=3D=3D1) {
+ dprintk (KERN_INFO "longhaul: Voltage scaling + FSB scaling not done y=
et.\n");
+ goto bad_voltage;
+ } else {
+ /* PB: TODO fix this up */
+ vidindex =3D (((highest_speed-lowest_speed) / (newfsb/2)) -
+ ((highest_speed-((clock_ratio[clock_ratio_index] * newfsb * 100)/100=
0)) / (newfsb/2)));
+ }
+ for (i=3D0;i<32;i++) {
+ dprintk (KERN_INFO "VID hunting. Looking for %d, found %d\n",
+ minvid+(vidindex*25), voltage_table[i]);
+ if (voltage_table[i]=3D=3D(minvid + (vidindex * 25)))
+ break;
+ }
+ if (i=3D=3D32)
+ goto bad_voltage;
+
+ dprintk (KERN_INFO "longhaul: Desired vid index=3D%d\n", i);
+#if 0
+ lo &=3D 0xfe0fffff;/* reset [24:20](voltage) to 0 */
+ lo |=3D (i<<20); /* set voltage */
+ lo |=3D (1<<9); /* EnableSoftVID */
+#endif
+ }
+
+bad_voltage:
+ wrmsr (MSR_VIA_LONGHAUL, lo, hi);
+ __hlt();
+
+ rdmsr (MSR_VIA_LONGHAUL, lo, hi);
+ lo &=3D ~(1<<8);
+ if (can_scale_voltage)
+ lo &=3D ~(1<<9);
+ lo |=3D revkey;
+ wrmsr (MSR_VIA_LONGHAUL, lo, hi);
+ break;
+
+ case 3:
+ rdmsr (MSR_VIA_LONGHAUL, lo, hi);
+ revkey =3D (lo & 0xf)<<4; /* Rev key. */
+ lo &=3D 0xfff0bf0f; /* reset longhaul[19:16,14] to 0 */
+ lo |=3D (bits<<16);
+ lo |=3D (1<<8); /* EnableSoftBusRatio */
+ lo |=3D revkey;
+
+ /* Set FSB */
+ if (can_scale_fsb=3D=3D1) {
+ lo &=3D ~(1<<28|1<<29);
+ switch (newfsb) {
+ case 66: lo |=3D (1<<28|1<<29); /* 11 */
+ break;
+ case 100: lo |=3D 1<<28; /* 01 */
+ break;
+ case 133: break; /* 00*/
+ }
+ }
+ wrmsr (MSR_VIA_LONGHAUL, lo, hi);
+ __hlt();
+
+ rdmsr (MSR_VIA_LONGHAUL, lo, hi);
+ lo &=3D ~(1<<8);
+ lo |=3D revkey;
+ wrmsr (MSR_VIA_LONGHAUL, lo, hi);
+ break;
+ }
+
+ cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+}
+
+
+static void __init longhaul_get_ranges (void)
+{
+ unsigned long lo, hi, invalue;
+ unsigned int minmult=3D0, maxmult=3D0, minfsb=3D0, maxfsb=3D0;
+ unsigned int multipliers[32]=3D {
+ 50,30,40,100,55,35,45,95,90,70,80,60,120,75,85,65,
+ -1,110,120,-1,135,115,125,105,130,150,160,140,-1,155,-1,145 };
+ unsigned int fsb_table[4] =3D { 133, 100, -1, 66 };
+
+ switch (longhaul) {
+ case 1:
+ /* Ugh, Longhaul v1 didn't have the min/max MSRs.
+ Assume max =3D whatever we booted at. */
+ maxmult =3D longhaul_get_cpu_mult();
+ break;
+
+ case 2 ... 3:
+ rdmsr (MSR_VIA_LONGHAUL, lo, hi);
+
+ invalue =3D (hi & (1<<0|1<<1|1<<2|1<<3));
+ if (hi & (1<<11))
+ invalue +=3D 16;
+ maxmult=3Dmultipliers[invalue];
+
+#if 0 /* This is MaxMhz @ Min Voltage. Ignore for now */
+ invalue =3D (hi & (1<<16|1<<17|1<<18|1<<19)) >> 16;
+ if (hi & (1<<27))
+ invalue +=3D 16;
+ minmult =3D multipliers[invalue];
+#else
+ minmult =3D 30; /* as per spec */
+#endif
+
+ if (can_scale_fsb=3D=3D1) {
+ invalue =3D (hi & (1<<9|1<<10)) >> 9;
+ maxfsb =3D fsb_table[invalue];
+
+ invalue =3D (hi & (1<<25|1<<26)) >> 25;
+ minfsb =3D fsb_table[invalue];
+
+ dprintk (KERN_INFO "longhaul: Min FSB=3D%d Max FSB=3D%d\n",
+ minfsb, maxfsb);
+ } else {
+ minfsb =3D maxfsb =3D current_fsb;
+ }
+ break;
+ }
+
+ highest_speed =3D maxmult * maxfsb * 100;
+ lowest_speed =3D minmult * minfsb * 100;
+
+ dprintk (KERN_INFO "longhaul: MinMult(x10)=3D%d MaxMult(x10)=3D%d\n",
+ minmult, maxmult);
+ dprintk (KERN_INFO "longhaul: Lowestspeed=3D%d Highestspeed=3D%d\n",
+ lowest_speed, highest_speed);
+}
+
+
+static void __init longhaul_setup_voltagescaling (unsigned long lo, unsign=
ed long hi)
+{
+ int revkey;
+
+ can_scale_voltage =3D 1;
+
+ minvid =3D (hi & (1<<20|1<<21|1<<22|1<<23|1<<24)) >> 20; /* 56:52 */
+ maxvid =3D (hi & (1<<4|1<<5|1<<6|1<<7|1<<8)) >> 4; /* 40:36 */
+ vrmrev =3D (lo & (1<<15))>>15;
+
+ if (vrmrev=3D=3D0) {
+ dprintk (KERN_INFO "longhaul: VRM 8.5 : ");
+ memcpy (voltage_table, vrm85scales, sizeof(voltage_table));
+ numvscales =3D (voltage_table[maxvid]-voltage_table[minvid])/25;
+ } else {
+ dprintk (KERN_INFO "longhaul: Mobile VRM : ");
+ memcpy (voltage_table, mobilevrmscales, sizeof(voltage_table));
+ numvscales =3D (voltage_table[maxvid]-voltage_table[minvid])/5;
+ }
+
+ /* Current voltage isn't readable at first, so we need to
+ set it to a known value. The spec says to use maxvid */
+ revkey =3D (lo & 0xf)<<4; /* Rev key. */
+ lo &=3D 0xfe0fff0f; /* Mask unneeded bits */
+ lo |=3D (1<<9); /* EnableSoftVID */
+ lo |=3D revkey; /* Reinsert key */
+ lo |=3D maxvid << 20;
+ wrmsr (MSR_VIA_LONGHAUL, lo, hi);
+ minvid =3D voltage_table[minvid];
+ maxvid =3D voltage_table[maxvid];
+ dprintk ("Min VID=3D%d.%03d Max VID=3D%d.%03d, %d possible voltage scales=
\n",
+ maxvid/1000, maxvid%1000, minvid/1000, minvid%1000, numvscales);
+}
+
+
+static inline unsigned int longhaul_statecount_fsb(struct cpufreq_policy *=
policy, unsigned int fsb) {
+ unsigned int i, count =3D 0;
+
+ for(i=3D0; i<numscales; i++) {
+ if ((clock_ratio[i] !=3D -1) &&
+ ((clock_ratio[i] * fsb * 100) <=3D policy->max) &&
+ ((clock_ratio[i] * fsb * 100) >=3D policy->min))
+ count++;
+ }
+
+ return count;
+}
+
+
+static void longhaul_verify(struct cpufreq_policy *policy)
+{
+ unsigned int number_states =3D 0;
+ unsigned int i;
+ unsigned int fsb_index =3D 0;
+ unsigned int tmpfreq =3D 0;
+ unsigned int newmax =3D -1;
+
+ if (!policy || !longhaul_driver)
+ return;
+
+ policy->cpu =3D 0;
+ cpufreq_verify_within_limits(policy, lowest_speed, highest_speed);
+
+ if (can_scale_fsb=3D=3D1) {
+ for (fsb_index=3D0; fsb_search_table[fsb_index]!=3D-1; fsb_index++)
+ number_states +=3D longhaul_statecount_fsb(policy, fsb_search_table[fsb=
_index]);
+ } else
+ number_states =3D longhaul_statecount_fsb(policy, current_fsb);
+
+ if (number_states)
+ return;
+
+ /* get frequency closest above current policy->max */
+ if (can_scale_fsb=3D=3D1) {
+ for (fsb_index=3D0; fsb_search_table[fsb_index] !=3D -1; fsb_index++)
+ for(i=3D0; i<numscales; i++) {
+ if (clock_ratio[i] =3D=3D -1)
+ continue;
+
+ tmpfreq =3D clock_ratio[i] * fsb_search_table[fsb_index];
+ if ((tmpfreq > policy->max) &&
+ (tmpfreq < newmax))
+ newmax =3D tmpfreq;
+ }
+ } else {
+ for(i=3D0; i<numscales; i++) {
+ if (clock_ratio[i] =3D=3D -1)
+ continue;
+
+ tmpfreq =3D clock_ratio[i] * current_fsb;
+ if ((tmpfreq > policy->max) &&
+ (tmpfreq < newmax))
+ newmax =3D tmpfreq;
+ }
+ }
+
+ policy->max =3D newmax;
+}
+
+
+static void longhaul_setpolicy (struct cpufreq_policy *policy)
+{
+ unsigned int number_states =3D 0;
+ unsigned int i;
+ unsigned int fsb_index =3D 0;
+ unsigned int new_fsb =3D 0;
+ unsigned int new_clock_ratio =3D 0;
+ unsigned int best_freq =3D -1;
+
+ if (!longhaul_driver)
+ return;
+
+ if (policy->policy=3D=3DCPUFREQ_POLICY_PERFORMANCE)
+ fsb_search_table =3D perf_fsb_table;
+ else
+ fsb_search_table =3D power_fsb_table;
+
+ if (can_scale_fsb=3D=3D1) {
+ for (fsb_index=3D0; fsb_search_table[fsb_index]!=3D-1; fsb_index++)=20
+ {
+ unsigned int tmpcount =3D longhaul_statecount_fsb(policy, fsb_search_ta=
ble[fsb_index]);
+ if (tmpcount =3D=3D 1)
+ new_fsb =3D fsb_search_table[fsb_index];
+ number_states +=3D tmpcount;
+ }
+ } else {
+ number_states =3D longhaul_statecount_fsb(policy, current_fsb);
+ new_fsb =3D current_fsb;
+ }
+
+ if (!number_states)
+ return;
+ else if (number_states =3D=3D 1) {
+ for(i=3D0; i<numscales; i++) {
+ if ((clock_ratio[i] !=3D -1) &&
+ ((clock_ratio[i] * new_fsb * 100) <=3D policy->max) &&
+ ((clock_ratio[i] * new_fsb * 100) >=3D policy->min))
+ new_clock_ratio =3D i;
+ }
+ longhaul_setstate(new_clock_ratio, new_fsb);
+ }
+
+ switch (policy->policy) {
+ case CPUFREQ_POLICY_POWERSAVE:
+ best_freq =3D -1;
+ if (can_scale_fsb=3D=3D1) {
+ for (fsb_index=3D0; fsb_search_table[fsb_index]!=3D-1; fsb_index++)=20
+ {
+ for(i=3D0; i<numscales; i++) {
+ unsigned int tmpfreq =3D fsb_search_table[fsb_index] * clock_ratio[i]=
* 100;
+ if (clock_ratio[i] =3D=3D -1)
+ continue;
+
+ if ((tmpfreq >=3D policy->min) &&
+ (tmpfreq <=3D policy->max) &&
+ (tmpfreq < best_freq)) {
+ new_clock_ratio =3D i;
+ new_fsb =3D fsb_search_table[fsb_index];
+ }
+ }
+ }
+ } else {
+ for(i=3D0; i<numscales; i++) {
+ unsigned int tmpfreq =3D current_fsb * clock_ratio[i] * 100;
+ if (clock_ratio[i] =3D=3D -1)
+ continue;
+
+ if ((tmpfreq >=3D policy->min) &&
+ (tmpfreq <=3D policy->max) &&
+ (tmpfreq < best_freq)) {
+ new_clock_ratio =3D i;
+ new_fsb =3D current_fsb;
+ }
+ }
+ }
+ break;
+ case CPUFREQ_POLICY_PERFORMANCE:
+ best_freq =3D 0;
+ if (can_scale_fsb=3D=3D1) {
+ for (fsb_index=3D0; fsb_search_table[fsb_index]!=3D-1; fsb_index++)=20
+ {
+ for(i=3D0; i<numscales; i++) {
+ unsigned int tmpfreq =3D fsb_search_table[fsb_index] * clock_ratio[i]=
* 100;
+ if (clock_ratio[i] =3D=3D -1)
+ continue;
+
+ if ((tmpfreq >=3D policy->min) &&
+ (tmpfreq <=3D policy->max) &&
+ (tmpfreq > best_freq)) {
+ new_clock_ratio =3D i;
+ new_fsb =3D fsb_search_table[fsb_index];
+ }
+ }
+ }
+ } else {
+ for(i=3D0; i<numscales; i++) {
+ unsigned int tmpfreq =3D current_fsb * clock_ratio[i] * 100;
+ if (clock_ratio[i] =3D=3D -1)
+ continue;
+
+ if ((tmpfreq >=3D policy->min) &&
+ (tmpfreq <=3D policy->max) &&
+ (tmpfreq > best_freq)) {
+ new_clock_ratio =3D i;
+ new_fsb =3D current_fsb;
+ }
+ }
+ }
+ break;
+ default:
+ return;
+ }
+
+ longhaul_setstate(new_clock_ratio, new_fsb);
+ return;
+}
+
+
+static int __init longhaul_init (void)
+{
+ struct cpuinfo_x86 *c =3D cpu_data;
+ unsigned int currentspeed;
+ static int currentmult;
+ unsigned long lo, hi;
+ int ret;
+ struct cpufreq_driver *driver;
+
+ if ((c->x86_vendor !=3D X86_VENDOR_CENTAUR) || (c->x86 !=3D6) )
+ return -ENODEV;
+
+ switch (c->x86_model) {
+ case 6: /* VIA C3 Samuel C5A */
+ longhaul=3D1;
+ memcpy (clock_ratio, longhaul1_clock_ratio, sizeof(longhaul1_clock_ratio=
));
+ memcpy (eblcr_table, samuel1_eblcr, sizeof(samuel1_eblcr));
+ break;
+
+ case 7: /* C5B / C5C */
+ switch (c->x86_mask) {
+ case 0:
+ longhaul=3D1;
+ memcpy (clock_ratio, longhaul1_clock_ratio, sizeof(longhaul1_clock_rati=
o));
+ memcpy (eblcr_table, samuel2_eblcr, sizeof(samuel2_eblcr));
+ break;
+ case 1 ... 15:
+ longhaul=3D2;
+ memcpy (clock_ratio, longhaul2_clock_ratio, sizeof(longhaul2_clock_rati=
o));
+ memcpy (eblcr_table, ezra_eblcr, sizeof(ezra_eblcr));
+ break;
+ }
+ break;
+
+ case 8: /* C5M/C5N */
+ return -ENODEV; // Waiting on updated docs from VIA before this is usable
+ longhaul=3D3;
+ numscales=3D32;
+ memcpy (clock_ratio, longhaul3_clock_ratio, sizeof(longhaul3_clock_ratio=
));
+ memcpy (eblcr_table, c5m_eblcr, sizeof(c5m_eblcr));
+ break;
+
+ default:
+ printk (KERN_INFO "longhaul: Unknown VIA CPU. Contact davej@suse.de\n");
+ return -ENODEV;
+ }
+
+ printk (KERN_INFO "longhaul: VIA CPU detected. Longhaul version %d suppor=
ted\n", longhaul);
+
+ current_fsb =3D longhaul_get_cpu_fsb();
+ currentmult =3D longhaul_get_cpu_mult();
+ currentspeed =3D currentmult * current_fsb * 100;
+
+ dprintk (KERN_INFO "longhaul: CPU currently at %dMHz (%d x %d.%d)\n",
+ (currentspeed/1000), current_fsb, currentmult/10, currentmult%10);
+
+ if (longhaul=3D=3D2 || longhaul=3D=3D3) {
+ rdmsr (MSR_VIA_LONGHAUL, lo, hi);
+ if ((lo & (1<<0)) && (dont_scale_voltage=3D=3D0))
+ longhaul_setup_voltagescaling (lo, hi);
+
+ if ((lo & (1<<1)) && (dont_scale_fsb=3D=3D0) && (current_fsb=3D=3D0))
+ can_scale_fsb =3D 1;
+ }
+
+ longhaul_get_ranges();
+
+ driver =3D kmalloc(sizeof(struct cpufreq_driver) +=20
+ NR_CPUS * sizeof(struct cpufreq_policy), GFP_KERNEL);
+ if (!driver)
+ return -ENOMEM;
+
+ driver->policy =3D (struct cpufreq_policy *) (driver + sizeof(struct cpuf=
req_driver));
+
+#ifdef CONFIG_CPU_FREQ_24_API
+ driver->cpu_min_freq =3D (unsigned int) lowest_speed;
+ driver->cpu_cur_freq[0] =3D currentspeed;
+#endif
+
+ driver->verify =3D &longhaul_verify;
+ driver->setpolicy =3D &longhaul_setpolicy;
+
+ driver->policy[0].cpu =3D 0;
+ driver->policy[0].min =3D (unsigned int) lowest_speed;
+ driver->policy[0].max =3D (unsigned int) highest_speed;
+ driver->policy[0].policy =3D CPUFREQ_POLICY_PERFORMANCE;
+ driver->policy[0].max_cpu_freq =3D (unsigned int) highest_speed;
+
+ ret =3D cpufreq_register(driver);
+
+ if (ret) {
+ kfree(driver);
+ return ret;
+ }
+
+ longhaul_driver =3D driver;
+ return 0;
+}
+
+
+static void __exit longhaul_exit (void)
+{
+ if (longhaul_driver) {
+ cpufreq_unregister();
+ kfree(longhaul_driver);
+ }
+}
+
+MODULE_PARM (dont_scale_fsb, "i");
+MODULE_PARM (dont_scale_voltage, "i");
+MODULE_PARM (current_fsb, "i");
+
+MODULE_AUTHOR ("Dave Jones <davej@suse.de>");
+MODULE_DESCRIPTION ("Longhaul driver for VIA Cyrix processors.");
+MODULE_LICENSE ("GPL");
+
+module_init(longhaul_init);
+module_exit(longhaul_exit);
+
diff -ruN linux-2535original/arch/i386/kernel/cpu/cpufreq/longrun.c linux/a=
rch/i386/kernel/cpu/cpufreq/longrun.c
--- linux-2535original/arch/i386/kernel/cpu/cpufreq/longrun.c Thu Jan 1 01=
:00:00 1970
+++ linux/arch/i386/kernel/cpu/cpufreq/longrun.c Tue Sep 17 09:35:15 2002
@@ -0,0 +1,175 @@
+/*
+ * $Id: longrun.c,v 1.6 2002/09/12 10:22:18 db Exp $
+ *
+ * (C) 2002 Dominik Brodowski <devel@brodo.de>
+ *
+ * Licensed under the terms of the GNU GPL License version 2.
+ *
+ * BIG FAT DISCLAIMER: Work in progress code. Possibly *dangerous*
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>=20
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/cpufreq.h>
+
+#include <asm/msr.h>
+#include <asm/processor.h>
+#include <asm/timex.h>
+
+static struct cpufreq_driver *longrun_driver;
+
+
+/**
+ * longrun_get_policy - get the current LongRun policy
+ * @policy: struct cpufreq_policy where current policy is written into
+ *
+ * Reads the current LongRun policy by access to MSR_TMTA_LONGRUN_FLAGS
+ * and MSR_TMTA_LONGRUN_CTRL
+ */
+static void longrun_get_policy(struct cpufreq_policy *policy)
+{
+ u32 msr_lo, msr_hi;
+
+ if (!longrun_driver)
+ return;
+
+ rdmsr(MSR_TMTA_LONGRUN_FLAGS, msr_lo, msr_hi);
+ if (msr_lo & 0x01)
+ policy->policy =3D CPUFREQ_POLICY_PERFORMANCE;
+ else
+ policy->policy =3D CPUFREQ_POLICY_POWERSAVE;
+=09
+ rdmsr(MSR_TMTA_LONGRUN_CTRL, msr_lo, msr_hi);
+ msr_lo &=3D 0x0000007F;
+ msr_hi &=3D 0x0000007F;
+
+ policy->min =3D msr_lo * (longrun_driver->policy[0].max_cpu_freq / 100);
+ policy->max =3D msr_hi * (longrun_driver->policy[0].max_cpu_freq / 100);
+ policy->cpu =3D 0;
+}
+
+
+/**
+ * longrun_set_policy - sets a new CPUFreq policy
+ * @policy - new policy
+ *
+ * Sets a new CPUFreq policy on LongRun-capable processors. This function
+ * has to be called with cpufreq_driver locked.
+ */
+static void longrun_set_policy(struct cpufreq_policy *policy)
+{
+ u32 msr_lo, msr_hi;
+ u32 pctg_lo, pctg_hi;
+
+ if (!longrun_driver || !policy)
+ return;
+
+ pctg_lo =3D (policy->min * 100) / policy->max_cpu_freq;
+ pctg_hi =3D (policy->max * 100) / policy->max_cpu_freq;
+
+ if (pctg_hi > 100)
+ pctg_hi =3D 100;
+ if (pctg_lo > pctg_hi)
+ pctg_lo =3D pctg_hi;
+
+ /* performance or economy mode */
+ rdmsr(MSR_TMTA_LONGRUN_FLAGS, msr_lo, msr_hi);
+ msr_lo &=3D 0xFFFFFFFE;
+ switch (policy->policy) {
+ case CPUFREQ_POLICY_PERFORMANCE:
+ msr_lo |=3D 0x00000001;
+ break;
+ case CPUFREQ_POLICY_POWERSAVE:
+ break;
+ }
+ wrmsr(MSR_TMTA_LONGRUN_FLAGS, msr_lo, msr_hi);
+
+ /* lower and upper boundary */
+ rdmsr(MSR_TMTA_LONGRUN_CTRL, msr_lo, msr_hi);
+ msr_lo &=3D 0xFFFFFF80;
+ msr_hi &=3D 0xFFFFFF80;
+ msr_lo |=3D pctg_lo;
+ msr_hi |=3D pctg_hi;
+ wrmsr(MSR_TMTA_LONGRUN_CTRL, msr_lo, msr_hi);=09
+
+ return;
+}
+
+
+/**
+ * longrun_verify_poliy - verifies a new CPUFreq policy
+ *
+ * Validates a new CPUFreq policy. This function has to be called with=20
+ * cpufreq_driver locked.
+ */
+static void longrun_verify_policy(struct cpufreq_policy *policy)
+{
+ if (!policy || !longrun_driver)
+ return;
+
+ policy->cpu =3D 0;
+ cpufreq_verify_within_limits(policy, 0,=20
+ longrun_driver->policy[0].max_cpu_freq);
+
+ return;
+}
+
+
+/**
+ * longrun_init - initializes the Transmeta Crusoe LongRun CPUFreq driver
+ *
+ * Initializes the LongRun support.
+ */
+static int __init longrun_init(void)
+{
+ int result;
+ struct cpufreq_driver *driver;
+ struct cpuinfo_x86 *c =3D cpu_data;
+
+ if (c->x86_vendor !=3D X86_VENDOR_TRANSMETA ||=20
+ !cpu_has(c, X86_FEATURE_LONGRUN))
+ return 0;
+
+ /* initialization of main "cpufreq" code*/
+ driver =3D kmalloc(sizeof(struct cpufreq_driver) +=20
+ NR_CPUS * sizeof(struct cpufreq_policy), GFP_KERNEL);
+ if (!driver)
+ return -ENOMEM;
+
+ driver->policy =3D (struct cpufreq_policy *) (driver + sizeof(struct cpuf=
req_driver));
+
+ driver->policy[0].max_cpu_freq =3D cpu_khz;
+ longrun_get_policy(&driver->policy[0]);
+
+ driver->verify =3D &longrun_verify_policy;
+ driver->setpolicy =3D &longrun_set_policy;
+ result =3D cpufreq_register(driver);
+ if (result) {
+ kfree(driver);
+ return result;
+ }
+ longrun_driver =3D driver;
+
+ return 0;
+}
+
+
+/**
+ * longrun_exit - unregisters LongRun support
+ */
+static void __exit longrun_exit(void)
+{
+ if (longrun_driver) {
+ cpufreq_unregister();
+ kfree(longrun_driver);
+ }
+}
+
+
+MODULE_AUTHOR ("Dominik Brodowski <devel@brodo.de>");
+MODULE_DESCRIPTION ("LongRun driver for Transmeta Crusoe processors.");
+MODULE_LICENSE ("GPL");
+module_init(longrun_init);
+module_exit(longrun_exit);
diff -ruN linux-2535original/arch/i386/kernel/cpu/cpufreq/p4-clockmod.c lin=
ux/arch/i386/kernel/cpu/cpufreq/p4-clockmod.c
--- linux-2535original/arch/i386/kernel/cpu/cpufreq/p4-clockmod.c Thu Jan =
1 01:00:00 1970
+++ linux/arch/i386/kernel/cpu/cpufreq/p4-clockmod.c Tue Sep 17 09:35:22 20=
02
@@ -0,0 +1,285 @@
+/*
+ * Pentium 4/Xeon CPU on demand clock modulation/speed scaling
+ * (C) 2002 Zwane Mwaikambo <zwane@commfireservices.com>
+ * (C) 2002 Arjan van de Ven <arjanv@redhat.com>
+ * (C) 2002 Tora T. Engstad
+ * All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * The author(s) of this software shall not be held liable for damages
+ * of any nature resulting due to the use of this software. This
+ * software is provided AS-IS with no warranties.
+ *=09
+ * Date Errata Description
+ * 20020525 N44, O17 12.5% or 25% DC causes lockup
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>=20
+#include <linux/init.h>
+#include <linux/smp.h>
+#include <linux/cpufreq.h>
+#include <linux/slab.h>
+#include <linux/sched.h>
+
+#include <asm/processor.h>=20
+#include <asm/msr.h>
+#include <asm/timex.h>
+
+#define PFX "cpufreq: "
+
+/*
+ * Duty Cycle (3bits), note DC_DISABLE is not specified in
+ * intel docs i just use it to mean disable
+ */
+enum {
+ DC_RESV, DC_DFLT, DC_25PT, DC_38PT, DC_50PT,
+ DC_64PT, DC_75PT, DC_88PT, DC_DISABLE
+};
+
+#define DC_ENTRIES 8
+
+
+static int has_N44_O17_errata;
+static int stock_freq;
+MODULE_PARM(stock_freq, "i");
+
+static struct cpufreq_driver *cpufreq_p4_driver;
+static unsigned int cpufreq_p4_old_state =3D 0;
+
+
+static int cpufreq_p4_setdc(unsigned int cpu, unsigned int newstate)
+{
+ u32 l, h;
+ unsigned long cpus_allowed;
+ struct cpufreq_freqs freqs;
+
+ if (!cpu_online(cpu) || (newstate > DC_DISABLE) ||=20
+ (newstate =3D=3D DC_RESV))
+ return -EINVAL;
+ cpu =3D cpu >> 1; /* physical CPU #nr */
+
+ /* notifiers */
+ freqs.old =3D stock_freq * cpufreq_p4_old_state / 8;
+ freqs.new =3D stock_freq * newstate / 8;
+ freqs.cpu =3D 2*cpu;
+ cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+ freqs.cpu++;
+ cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+
+ /* switch to physical CPU where state is to be changed*/
+ cpus_allowed =3D current->cpus_allowed;
+ set_cpus_allowed(current, 2 << (2 * cpu));
+ BUG_ON(cpu !=3D (smp_processor_id() >> 1));
+
+ rdmsr(MSR_IA32_THERM_STATUS, l, h);
+ if (l & 0x01)
+ printk(KERN_DEBUG PFX "CPU#%d currently thermal throttled\n", cpu);
+
+ if (has_N44_O17_errata && (newstate =3D=3D DC_25PT || newstate =3D=3D DC_=
DFLT))
+ newstate =3D DC_38PT;
+
+ rdmsr(MSR_IA32_THERM_CONTROL, l, h);
+ if (newstate =3D=3D DC_DISABLE) {
+ printk(KERN_INFO PFX "CPU#%d,%d disabling modulation\n", cpu, (cpu + 1));
+ wrmsr(MSR_IA32_THERM_CONTROL, l & ~(1<<4), h);
+ } else {
+ printk(KERN_INFO PFX "CPU#%d,%d setting duty cycle to %d%%\n", cpu, (cpu=
+ 1), ((125 * newstate) / 10));
+ /* bits 63 - 5 : reserved=20
+ * bit 4 : enable/disable
+ * bits 3-1 : duty cycle
+ * bit 0 : reserved
+ */
+ l =3D (l & ~14);
+ l =3D l | (1<<4) | ((newstate & 0x7)<<1);
+ wrmsr(MSR_IA32_THERM_CONTROL, l, h);
+ }
+
+ set_cpus_allowed(current, cpus_allowed);
+
+ /* notifiers */
+ cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+ freqs.cpu--;
+ cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+ cpufreq_p4_old_state =3D newstate;
+
+ return 0;
+}
+
+
+static void cpufreq_p4_setpolicy(struct cpufreq_policy *policy)
+{
+ unsigned int i;
+ unsigned int newstate =3D 0;
+ unsigned int number_states =3D 0;
+
+ if (!cpufreq_p4_driver || !stock_freq || !policy)
+ return;
+
+ if (policy->policy =3D=3D CPUFREQ_POLICY_POWERSAVE)
+ {
+ for (i=3D8; i>0; i++)
+ if ((policy->min <=3D ((stock_freq / 8) * i)) &&
+ (policy->max >=3D ((stock_freq / 8) * i)))=20
+ {
+ newstate =3D i;
+ number_states++;
+ }
+ } else {
+ for (i=3D0; i<=3D8; i--)
+ if ((policy->min <=3D ((stock_freq / 8) * i)) &&
+ (policy->max >=3D ((stock_freq / 8) * i)))=20
+ {
+ newstate =3D i;
+ number_states++;
+ }
+ }
+
+ /* if (number_states =3D=3D 1) */
+ {
+ if (policy->cpu =3D=3D CPUFREQ_ALL_CPUS) {
+ for (i=3D0; i<(NR_CPUS/2); i++)
+ if (cpu_online(2*i))
+ cpufreq_p4_setdc((2*i), newstate);
+ } else {
+ cpufreq_p4_setdc(policy->cpu, newstate);
+ }
+ }
+ /* else {
+ if (policy->policy =3D=3D CPUFREQ_POLICY_POWERSAVE) {
+ min_state =3D newstate;
+ max_state =3D newstate + (number_states - 1);
+ } else {
+ max_state =3D newstate;
+ min_state =3D newstate - (number_states - 1);
+ }
+ } */
+}
+
+
+static void cpufreq_p4_verify(struct cpufreq_policy *policy)
+{
+ unsigned int number_states =3D 0;
+ unsigned int i;
+
+ if (!cpufreq_p4_driver || !stock_freq || !policy)
+ return;
+
+ if (!cpu_online(policy->cpu))
+ policy->cpu =3D CPUFREQ_ALL_CPUS;
+ cpufreq_verify_within_limits(policy, (stock_freq / 8), stock_freq);
+
+ /* is there at least one state within limit? */
+ for (i=3D1; i<=3D8; i++)
+ if ((policy->min <=3D ((stock_freq / 8) * i)) &&
+ (policy->max >=3D ((stock_freq / 8) * i)))
+ number_states++;
+
+ if (number_states)
+ return;
+
+ policy->max =3D (stock_freq / 8) * (((unsigned int) ((policy->max * 8) / =
stock_freq)) + 1);
+ return;
+}
+
+
+int __init cpufreq_p4_init(void)
+{=09
+ struct cpuinfo_x86 *c =3D cpu_data;
+ int cpuid;
+ int ret;
+ struct cpufreq_driver *driver;
+ unsigned int i;
+
+ /*
+ * THERM_CONTROL is architectural for IA32 now, so=20
+ * we can rely on the capability checks
+ */
+ if (c->x86_vendor !=3D X86_VENDOR_INTEL)
+ return -ENODEV;
+
+ if (!test_bit(X86_FEATURE_ACPI, c->x86_capability) ||
+ !test_bit(X86_FEATURE_ACC, c->x86_capability))
+ return -ENODEV;
+
+ /* Errata workarounds */
+ cpuid =3D (c->x86 << 8) | (c->x86_model << 4) | c->x86_mask;
+ switch (cpuid) {
+ case 0x0f07:
+ case 0x0f0a:
+ case 0x0f11:
+ case 0x0f12:
+ has_N44_O17_errata =3D 1;
+ default:
+ break;
+ }
+
+ printk(KERN_INFO PFX "P4/Xeon(TM) CPU On-Demand Clock Modulation availabl=
e\n");
+ driver =3D kmalloc(sizeof(struct cpufreq_driver) +
+ NR_CPUS * sizeof(struct cpufreq_freqs), GFP_KERNEL);
+ if (!driver)
+ return -ENOMEM;
+
+ driver->policy =3D (struct cpufreq_policy *) (driver + sizeof(struct cpuf=
req_driver));
+
+ if (!stock_freq)
+ stock_freq =3D cpu_khz;
+
+#ifdef CONFIG_CPU_FREQ_24_API
+ driver->cpu_min_freq =3D stock_freq / 8;
+ for (i=3D0;i<NR_CPUS;i++)
+ driver->cpu_cur_freq[i] =3D stock_freq;
+#endif
+ cpufreq_p4_old_state =3D DC_DISABLE;
+
+ driver->verify =3D &cpufreq_p4_verify;
+ driver->setpolicy =3D &cpufreq_p4_setpolicy;
+
+ for (i=3D0;i<NR_CPUS;i++) {
+ if (has_N44_O17_errata)
+ driver->policy[i].min =3D (stock_freq * 3) / 8;
+ else
+ driver->policy[i].min =3D stock_freq / 8;
+ driver->policy[i].max =3D stock_freq;
+ driver->policy[i].policy =3D CPUFREQ_POLICY_PERFORMANCE;
+ driver->policy[i].max_cpu_freq =3D stock_freq;
+ driver->policy[i].cpu =3D i;
+ }
+
+ ret =3D cpufreq_register(driver);
+ if (ret) {
+ kfree(driver);
+ return ret;
+ }
+
+ cpufreq_p4_driver =3D driver;
+=09
+ return 0;
+}
+
+
+void __exit cpufreq_p4_exit(void)
+{
+ u32 l, h;
+
+ if (cpufreq_p4_driver) {
+ cpufreq_unregister();
+ /* return back to a non modulated state */
+ rdmsr(MSR_IA32_THERM_CONTROL, l, h);
+ wrmsr(MSR_IA32_THERM_CONTROL, l & ~(1<<4), h);
+ kfree(cpufreq_p4_driver);
+ }
+}
+
+MODULE_AUTHOR ("Zwane Mwaikambo <zwane@commfireservices.com>");
+MODULE_DESCRIPTION ("cpufreq driver for Pentium(TM) 4/Xeon(TM)");
+MODULE_LICENSE ("GPL");
+
+module_init(cpufreq_p4_init);
+module_exit(cpufreq_p4_exit);
+
diff -ruN linux-2535original/arch/i386/kernel/cpu/cpufreq/powernow-k6.c lin=
ux/arch/i386/kernel/cpu/cpufreq/powernow-k6.c
--- linux-2535original/arch/i386/kernel/cpu/cpufreq/powernow-k6.c Thu Jan =
1 01:00:00 1970
+++ linux/arch/i386/kernel/cpu/cpufreq/powernow-k6.c Tue Sep 17 09:35:26 20=
02
@@ -0,0 +1,294 @@
+/*
+ * $Id: powernow-k6.c,v 1.30 2002/09/12 10:22:18 db Exp $
+ * This file was part of Powertweak Linux (http://powertweak.sf.net)
+ * and is shared with the Linux Kernel module.
+ *
+ * (C) 2000-2002 Dave Jones, Arjan van de Ven, Janne P=E4nk=E4l=E4.
+ *
+ * Licensed under the terms of the GNU GPL License version 2.
+ *
+ * BIG FAT DISCLAIMER: Work in progress code. Possibly *dangerous*
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>=20
+#include <linux/init.h>
+#include <linux/cpufreq.h>
+#include <linux/ioport.h>
+#include <linux/slab.h>
+
+#include <asm/msr.h>
+#include <asm/timex.h>
+#include <asm/io.h>
+
+
+#define POWERNOW_IOPORT 0xfff0 /* it doesn't matter where, as long
+ as it is unused */
+
+static struct cpufreq_driver *powernow_driver;
+static unsigned int busfreq; /* FSB, in 10 kHz */
+static unsigned int max_multiplier;
+
+
+/* Clock ratio multiplied by 10 - see table 27 in AMD#23446 */
+static int clock_ratio[8] =3D {
+ 45, /* 000 -> 4.5x */
+ 50, /* 001 -> 5.0x */
+ 40, /* 010 -> 4.0x */
+ 55, /* 011 -> 5.5x */
+ 20, /* 100 -> 2.0x */
+ 30, /* 101 -> 3.0x */
+ 60, /* 110 -> 6.0x */
+ 35 /* 111 -> 3.5x */
+};
+
+
+/**
+ * powernow_k6_get_cpu_multiplier - returns the current FSB multiplier
+ *
+ * Returns the current setting of the frequency multiplier. Core clock
+ * speed is frequency of the Front-Side Bus multiplied with this value.
+ */
+static int powernow_k6_get_cpu_multiplier(void)
+{
+ u64 invalue =3D 0;
+ u32 msrval;
+=09
+ msrval =3D POWERNOW_IOPORT + 0x1;
+ wrmsr(MSR_K6_EPMR, msrval, 0); /* enable the PowerNow port */
+ invalue=3Dinl(POWERNOW_IOPORT + 0x8);
+ msrval =3D POWERNOW_IOPORT + 0x0;
+ wrmsr(MSR_K6_EPMR, msrval, 0); /* disable it again */
+
+ return clock_ratio[(invalue >> 5)&7];
+}
+
+
+/**
+ * powernow_k6_set_state - set the PowerNow! multiplier
+ * @best_i: clock_ratio[best_i] is the target multiplier
+ *
+ * Tries to change the PowerNow! multiplier
+ */
+static void powernow_k6_set_state (unsigned int best_i)
+{
+ unsigned long outvalue=3D0, invalue=3D0;
+ unsigned long msrval;
+ struct cpufreq_freqs freqs;
+
+ if (!powernow_driver) {
+ printk(KERN_ERR "cpufreq: initialization problem or invalid target frequ=
ency\n");
+ return;
+ }
+
+ freqs.old =3D busfreq * powernow_k6_get_cpu_multiplier();
+ freqs.new =3D busfreq * clock_ratio[best_i];
+ freqs.cpu =3D CPUFREQ_ALL_CPUS; /* powernow-k6.c is UP only driver */
+=09
+ cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+
+ /* we now need to transform best_i to the BVC format, see AMD#23446 */
+
+ outvalue =3D (1<<12) | (1<<10) | (1<<9) | (best_i<<5);
+
+ msrval =3D POWERNOW_IOPORT + 0x1;
+ wrmsr(MSR_K6_EPMR, msrval, 0); /* enable the PowerNow port */
+ invalue=3Dinl(POWERNOW_IOPORT + 0x8);
+ invalue =3D invalue & 0xf;
+ outvalue =3D outvalue | invalue;
+ outl(outvalue ,(POWERNOW_IOPORT + 0x8));
+ msrval =3D POWERNOW_IOPORT + 0x0;
+ wrmsr(MSR_K6_EPMR, msrval, 0); /* disable it again */
+
+ cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+
+ return;
+}
+
+
+/**
+ * powernow_k6_verify - verifies a new CPUfreq policy
+ * @policy: new policy
+ *
+ * Policy must be within lowest and highest possible CPU Frequency,
+ * and at least one possible state must be within min and max.
+ */
+static void powernow_k6_verify(struct cpufreq_policy *policy)
+{
+ unsigned int number_states =3D 0;
+ unsigned int i, j;
+
+ if (!policy || !busfreq)
+ return;
+
+ policy->cpu =3D 0;
+ cpufreq_verify_within_limits(policy, (20 * busfreq),
+ (max_multiplier * busfreq));
+
+ for (i=3D0; i<8; i++)
+ if ((policy->min <=3D (busfreq * clock_ratio[i])) &&
+ (policy->max >=3D (busfreq * clock_ratio[i])))
+ number_states++;
+
+ if (number_states)
+ return;
+
+ /* no state is available within range -- find next larger state */
+
+ j =3D 6;
+
+ for (i=3D0; i<8; i++)
+ if (((clock_ratio[i] * busfreq) >=3D policy->min) &&
+ (clock_ratio[i] < clock_ratio[j]))
+ j =3D i;
+
+ policy->max =3D clock_ratio[j] * busfreq;
+
+ return;
+}
+
+
+/**
+ * powernow_k6_setpolicy - sets a new CPUFreq policy
+ * @policy - new policy
+ *
+ * sets a new CPUFreq policy
+ */
+static void powernow_k6_setpolicy (struct cpufreq_policy *policy)
+{
+ unsigned int number_states =3D 0;
+ unsigned int i, j=3D4;
+
+ if (!powernow_driver)
+ return;
+
+ for (i=3D0; i<8; i++)
+ if ((policy->min <=3D (busfreq * clock_ratio[i])) &&
+ (policy->max >=3D (busfreq * clock_ratio[i])))
+ {
+ number_states++;
+ j =3D i;
+ }
+
+ if (number_states =3D=3D 1) {
+ /* if only one state is within the limit borders, it
+ is easily detected and set */
+ powernow_k6_set_state(j);
+ return;
+ }
+
+ /* more than one state within limit */
+ switch (policy->policy) {
+ case CPUFREQ_POLICY_POWERSAVE:
+ j =3D 6;
+ for (i=3D0; i<8; i++)
+ if ((policy->min <=3D (busfreq * clock_ratio[i])) &&
+ (policy->max >=3D (busfreq * clock_ratio[i])) &&
+ (clock_ratio[i] < clock_ratio[j]))
+ j =3D i;
+ break;
+ case CPUFREQ_POLICY_PERFORMANCE:
+ j =3D 4;
+ for (i=3D0; i<8; i++)
+ if ((policy->min <=3D (busfreq * clock_ratio[i])) &&
+ (policy->max >=3D (busfreq * clock_ratio[i])) &&
+ (clock_ratio[i] > clock_ratio[j]))
+ j =3D i;
+ break;
+ default:
+ return;
+ }
+
+ if (clock_ratio[i] > max_multiplier)
+ BUG();
+
+ powernow_k6_set_state(j);
+ return;
+}
+
+
+/**
+ * powernow_k6_init - initializes the k6 PowerNow! CPUFreq driver
+ *
+ * Initializes the K6 PowerNow! support. Returns -ENODEV on unsupported
+ * devices, -EINVAL or -ENOMEM on problems during initiatization, and zero
+ * on success.
+ */
+static int __init powernow_k6_init(void)
+{=09
+ struct cpuinfo_x86 *c =3D cpu_data;
+ struct cpufreq_driver *driver;
+ unsigned int result;
+
+ if ((c->x86_vendor !=3D X86_VENDOR_AMD) || (c->x86 !=3D 5) ||
+ ((c->x86_model !=3D 12) && (c->x86_model !=3D 13)))
+ return -ENODEV;
+
+ max_multiplier =3D powernow_k6_get_cpu_multiplier();
+ busfreq =3D cpu_khz / max_multiplier;
+
+ if (!request_region(POWERNOW_IOPORT, 16, "PowerNow!")) {
+ printk("cpufreq: PowerNow IOPORT region already used.\n");
+ return -EIO;
+ }
+
+ /* initialization of main "cpufreq" code*/
+ driver =3D kmalloc(sizeof(struct cpufreq_driver) +
+ NR_CPUS * sizeof(struct cpufreq_freqs), GFP_KERNEL);
+ if (!driver) {
+ release_region (POWERNOW_IOPORT, 16);
+ return -ENOMEM;
+ }
+ driver->policy =3D (struct cpufreq_policy *) (driver + sizeof(struct cpuf=
req_driver));
+
+#ifdef CONFIG_CPU_FREQ_24_API
+ driver->cpu_min_freq =3D busfreq * 20;
+ driver->cpu_cur_freq[0] =3D busfreq * max_multiplier;
+#endif
+
+ driver->verify =3D &powernow_k6_verify;
+ driver->setpolicy =3D &powernow_k6_setpolicy;
+
+ driver->policy[0].cpu =3D 0;
+ driver->policy[0].min =3D busfreq * 20;
+ driver->policy[0].max =3D busfreq * max_multiplier;
+ driver->policy[0].policy =3D CPUFREQ_POLICY_PERFORMANCE;
+ driver->policy[0].max_cpu_freq =3D busfreq * max_multiplier;
+
+
+ result =3D cpufreq_register(driver);
+ if (result) {
+ release_region (POWERNOW_IOPORT, 16);
+ kfree(driver);
+ return result;
+ }
+ powernow_driver =3D driver;
+
+ return 0;
+}
+
+
+/**
+ * powernow_k6_exit - unregisters AMD K6-2+/3+ PowerNow! support
+ *
+ * Unregisters AMD K6-2+ / K6-3+ PowerNow! support.
+ */
+static void __exit powernow_k6_exit(void)
+{
+ unsigned int i;
+
+ if (powernow_driver) {
+ for (i=3D0;i<8;i++)
+ if (clock_ratio[i] =3D=3D max_multiplier)
+ powernow_k6_set_state(i); =09
+ cpufreq_unregister();
+ kfree(powernow_driver);
+ }
+}
+
+
+MODULE_AUTHOR ("Arjan van de Ven <arjanv@redhat.com>, Dave Jones <davej@su=
se.de>, Dominik Brodowski <devel@brodo.de>");
+MODULE_DESCRIPTION ("PowerNow! driver for AMD K6-2+ / K6-3+ processors.");
+MODULE_LICENSE ("GPL");
+module_init(powernow_k6_init);
+module_exit(powernow_k6_exit);
diff -ruN linux-2535original/arch/i386/kernel/cpu/cpufreq/speedstep.c linux=
/arch/i386/kernel/cpu/cpufreq/speedstep.c
--- linux-2535original/arch/i386/kernel/cpu/cpufreq/speedstep.c Thu Jan 1 =
01:00:00 1970
+++ linux/arch/i386/kernel/cpu/cpufreq/speedstep.c Tue Sep 17 09:35:29 2002
@@ -0,0 +1,706 @@
+/*
+ * $Id: speedstep.c,v 1.48 2002/09/12 10:22:18 db Exp $
+ *
+ * (C) 2001 Dave Jones, Arjan van de ven.
+ * (C) 2002 Dominik Brodowski <devel@brodo.de>
+ *
+ * Licensed under the terms of the GNU GPL License version 2.
+ * Based upon reverse engineered information, and on Intel documentation
+ * for chipsets ICH2-M and ICH3-M.
+ *
+ * Many thanks to Ducrot Bruno for finding and fixing the last
+ * "missing link" for ICH2-M/ICH3-M support, and to Thomas Winkler=20
+ * for extensive testing.
+ *
+ * BIG FAT DISCLAIMER: Work in progress code. Possibly *dangerous*
+ */
+
+
+/*********************************************************************
+ * SPEEDSTEP - DEFINITIONS *
+ *********************************************************************/
+
+#include <linux/kernel.h>
+#include <linux/module.h>=20
+#include <linux/init.h>
+#include <linux/cpufreq.h>
+#include <linux/pci.h>
+#include <linux/slab.h>
+
+#include <asm/msr.h>
+
+
+static struct cpufreq_driver *speedstep_driver;
+
+/* speedstep_chipset:
+ * It is necessary to know which chipset is used. As accesses to=20
+ * this device occur at various places in this module, we need a=20
+ * static struct pci_dev * pointing to that device.
+ */
+static unsigned int speedstep_chipset;
+static struct pci_dev *speedstep_chipset_dev;
+
+#define SPEEDSTEP_CHIPSET_ICH2M 0x00000002
+#define SPEEDSTEP_CHIPSET_ICH3M 0x00000003
+
+
+/* speedstep_processor
+ */
+static unsigned int speedstep_processor;
+
+#define SPEEDSTEP_PROCESSOR_PIII_C 0x00000001 /* Coppermine core */
+#define SPEEDSTEP_PROCESSOR_PIII_T 0x00000002 /* Tualatin core */
+#define SPEEDSTEP_PROCESSOR_P4M 0x00000003 /* P4-M with 100 MHz F=
SB */
+
+
+/* speedstep_[low,high]_freq
+ * There are only two frequency states for each processor. Values
+ * are in kHz for the time being.
+ */
+static unsigned int speedstep_low_freq;
+static unsigned int speedstep_high_freq;
+
+#define SPEEDSTEP_HIGH 0x00000000
+#define SPEEDSTEP_LOW 0x00000001
+
+
+/* DEBUG
+ * Define it if you want verbose debug output, e.g. for bug reporting
+ */
+//#define SPEEDSTEP_DEBUG
+
+#ifdef SPEEDSTEP_DEBUG
+#define dprintk(msg...) printk(msg)
+#else
+#define dprintk(msg...) do { } while(0);
+#endif
+
+
+
+/*********************************************************************
+ * LOW LEVEL CHIPSET INTERFACE *
+ *********************************************************************/
+
+/**
+ * speedstep_get_state - read the current SpeedStep state
+ * @state: Speedstep state (SPEEDSTEP_LOW or SPEEDSTEP_HIGH)
+ *
+ * Tries to read the SpeedStep state. Returns -EIO when there has been
+ * trouble to read the status or write to the control register, -EINVAL
+ * on an unsupported chipset, and zero on success.
+ */
+static int speedstep_get_state (unsigned int *state)
+{
+ u32 pmbase;
+ u8 value;
+
+ if (!speedstep_chipset_dev || !state)
+ return -EINVAL;
+
+ switch (speedstep_chipset) {
+ case SPEEDSTEP_CHIPSET_ICH2M:
+ case SPEEDSTEP_CHIPSET_ICH3M:
+ /* get PMBASE */
+ pci_read_config_dword(speedstep_chipset_dev, 0x40, &pmbase);
+ if (!(pmbase & 0x01))
+ return -EIO;
+
+ pmbase &=3D 0xFFFFFFFE;
+ if (!pmbase)=20
+ return -EIO;
+
+ /* read state */
+ local_irq_disable();
+ value =3D inb(pmbase + 0x50);
+ local_irq_enable();
+
+ dprintk(KERN_DEBUG "cpufreq: read at pmbase 0x%x + 0x50 returned 0x%x\n"=
, pmbase, value);
+
+ *state =3D value & 0x01;
+ return 0;
+
+ }
+
+ printk (KERN_ERR "cpufreq: setting CPU frequency on this chipset unsuppor=
ted.\n");
+ return -EINVAL;
+}
+
+
+/**
+ * speedstep_set_state - set the SpeedStep state
+ * @state: new processor frequency state (SPEEDSTEP_LOW or SPEEDSTEP_HIGH)
+ *
+ * Tries to change the SpeedStep state.=20
+ */
+static void speedstep_set_state (unsigned int state)
+{
+ u32 pmbase;
+ u8 pm2_blk;
+ u8 value;
+ unsigned long flags;
+ unsigned int oldstate;
+ struct cpufreq_freqs freqs;
+
+ if (!speedstep_chipset_dev || !state || (state > 0x1))
+ return;
+
+ if (speedstep_get_state(&oldstate))
+ return;
+
+ if (oldstate =3D=3D state)
+ return;
+
+ freqs.old =3D (oldstate =3D=3D SPEEDSTEP_HIGH) ? speedstep_high_freq : sp=
eedstep_low_freq;
+ freqs.new =3D (state =3D=3D SPEEDSTEP_HIGH) ? speedstep_high_freq : speed=
step_low_freq;
+ freqs.cpu =3D CPUFREQ_ALL_CPUS; /* speedstep.c is UP only driver */
+=09
+ cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+
+ switch (speedstep_chipset) {
+ case SPEEDSTEP_CHIPSET_ICH2M:
+ case SPEEDSTEP_CHIPSET_ICH3M:
+ /* get PMBASE */
+ pci_read_config_dword(speedstep_chipset_dev, 0x40, &pmbase);
+ if (!(pmbase & 0x01))
+ {
+ printk(KERN_ERR "cpufreq: could not find speedstep register\n");
+ return;
+ }
+
+ pmbase &=3D 0xFFFFFFFE;
+ if (!pmbase) {
+ printk(KERN_ERR "cpufreq: could not find speedstep register\n");
+ return;
+ }
+
+ /* read state */
+ local_irq_disable();
+ value =3D inb(pmbase + 0x50);
+ local_irq_enable();
+
+ dprintk(KERN_DEBUG "cpufreq: read at pmbase 0x%x + 0x50 returned 0x%x\n"=
, pmbase, value);
+
+ /* write new state */
+ value &=3D 0xFE;
+ value |=3D state;
+
+ dprintk(KERN_DEBUG "cpufreq: writing 0x%x to pmbase 0x%x + 0x50\n", valu=
e, pmbase);
+
+ /* Disable IRQs */
+ local_irq_save(flags);
+ local_irq_disable();
+
+ /* Disable bus master arbitration */
+ pm2_blk =3D inb(pmbase + 0x20);
+ pm2_blk |=3D 0x01;
+ outb(pm2_blk, (pmbase + 0x20));
+
+ /* Actual transition */
+ outb(value, (pmbase + 0x50));
+
+ /* Restore bus master arbitration */
+ pm2_blk &=3D 0xfe;
+ outb(pm2_blk, (pmbase + 0x20));
+
+ /* Enable IRQs */
+ local_irq_enable();
+ local_irq_restore(flags);
+
+ /* check if transition was sucessful */
+ local_irq_disable();
+ value =3D inb(pmbase + 0x50);
+ local_irq_enable();
+
+ dprintk(KERN_DEBUG "cpufreq: read at pmbase 0x%x + 0x50 returned 0x%x\n"=
, pmbase, value);
+
+ if (state =3D=3D (value & 0x1)) {
+ dprintk (KERN_INFO "cpufreq: change to %u MHz succeded\n", (freq / 1000=
));
+ } else {
+ printk (KERN_ERR "cpufreq: change failed - I/O error\n");
+ }
+ break;
+ default:
+ printk (KERN_ERR "cpufreq: setting CPU frequency on this chipset unsuppo=
rted.\n");
+ }
+
+ cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+
+ return;
+}
+
+
+/**
+ * speedstep_activate - activate SpeedStep control in the chipset
+ *
+ * Tries to activate the SpeedStep status and control registers.
+ * Returns -EINVAL on an unsupported chipset, and zero on success.
+ */
+static int speedstep_activate (void)
+{
+ if (!speedstep_chipset_dev)
+ return -EINVAL;
+
+ switch (speedstep_chipset) {
+ case SPEEDSTEP_CHIPSET_ICH2M:
+ case SPEEDSTEP_CHIPSET_ICH3M:
+ {
+ u16 value =3D 0;
+
+ pci_read_config_word(speedstep_chipset_dev,=20
+ 0x00A0, &value);
+ if (!(value & 0x08)) {
+ value |=3D 0x08;
+ dprintk(KERN_DEBUG "cpufreq: activating SpeedStep (TM) registers\n");
+ pci_write_config_word(speedstep_chipset_dev,=20
+ 0x00A0, value);
+ }
+
+ return 0;
+ }
+ }
+=09
+ printk (KERN_ERR "cpufreq: SpeedStep (TM) on this chipset unsupported.\n"=
);
+ return -EINVAL;
+}
+
+
+/**
+ * speedstep_detect_chipset - detect the Southbridge which contains SpeedS=
tep logic
+ *
+ * Detects PIIX4, ICH2-M and ICH3-M so far. The pci_dev points to=20
+ * the LPC bridge / PM module which contains all power-management=20
+ * functions. Returns the SPEEDSTEP_CHIPSET_-number for the detected
+ * chipset, or zero on failure.
+ */
+static unsigned int speedstep_detect_chipset (void)
+{
+ speedstep_chipset_dev =3D pci_find_subsys(PCI_VENDOR_ID_INTEL,
+ PCI_DEVICE_ID_INTEL_82801CA_12,=20
+ PCI_ANY_ID,
+ PCI_ANY_ID,
+ NULL);
+ if (speedstep_chipset_dev)
+ return SPEEDSTEP_CHIPSET_ICH3M;
+
+
+ speedstep_chipset_dev =3D pci_find_subsys(PCI_VENDOR_ID_INTEL,
+ PCI_DEVICE_ID_INTEL_82801BA_10,
+ PCI_ANY_ID,
+ PCI_ANY_ID,
+ NULL);
+ if (speedstep_chipset_dev)
+ return SPEEDSTEP_CHIPSET_ICH2M;
+
+
+ return 0;
+}
+
+
+
+/*********************************************************************
+ * LOW LEVEL PROCESSOR INTERFACE *
+ *********************************************************************/
+
+
+/**
+ * pentium3_get_frequency - get the core frequencies for PIIIs
+ *
+ * Returns the core frequency of a Pentium III processor (in kHz)
+ */
+static unsigned int pentium3_get_frequency (void)
+{
+ /* See table 14 of p3_ds.pdf and table 22 of 29834003.pdf */
+ struct {
+ unsigned int ratio; /* Frequency Multiplier (x10) */
+ u8 bitmap; /* power on configuration bits
+ [27, 25:22] (in MSR 0x2a) */
+ } msr_decode_mult [] =3D {
+ { 30, 0x01 },
+ { 35, 0x05 },
+ { 40, 0x02 },
+ { 45, 0x06 },
+ { 50, 0x00 },
+ { 55, 0x04 },
+ { 60, 0x0b },
+ { 65, 0x0f },
+ { 70, 0x09 },
+ { 75, 0x0d },
+ { 80, 0x0a },
+ { 85, 0x26 },
+ { 90, 0x20 },
+ { 100, 0x2b },
+ { 0, 0xff } /* error or unknown value */
+ };
+ /* PIII(-M) FSB settings: see table b1-b of 24547206.pdf */
+ struct {
+ unsigned int value; /* Front Side Bus speed in MHz */
+ u8 bitmap; /* power on configuration bits [18: 19]
+ (in MSR 0x2a) */
+ } msr_decode_fsb [] =3D {
+ { 66, 0x0 },
+ { 100, 0x2 },
+ { 133, 0x1 },
+ { 0, 0xff}
+ };
+ u32 msr_lo, msr_tmp;
+ int i =3D 0, j =3D 0;
+ struct cpuinfo_x86 *c =3D cpu_data;
+
+ /* read MSR 0x2a - we only need the low 32 bits */
+ rdmsr(MSR_IA32_EBL_CR_POWERON, msr_lo, msr_tmp);
+ dprintk(KERN_DEBUG "cpufreq: P3 - MSR_IA32_EBL_CR_POWERON: 0x%x 0x%x\n", =
msr_lo, msr_tmp);
+ msr_tmp =3D msr_lo;
+
+ /* decode the FSB */
+ msr_tmp &=3D 0x00c0000;
+ msr_tmp >>=3D 18;
+ while (msr_tmp !=3D msr_decode_fsb[i].bitmap) {
+ if (msr_decode_fsb[i].bitmap =3D=3D 0xff)
+ return -EINVAL;
+ i++;
+ }
+
+ /* decode the multiplier */
+ if ((c->x86_model =3D=3D 0x08) && (c->x86_mask =3D=3D 0x01))=20
+ /* different on early Coppermine PIII */
+ msr_lo &=3D 0x03c00000;
+ else
+ msr_lo &=3D 0x0bc00000;
+ msr_lo >>=3D 22;
+ while (msr_lo !=3D msr_decode_mult[j].bitmap) {
+ if (msr_decode_mult[j].bitmap =3D=3D 0xff)
+ return -EINVAL;
+ j++;
+ }
+
+ return (msr_decode_mult[j].ratio * msr_decode_fsb[i].value * 100);
+}
+
+
+/**
+ * pentium4_get_frequency - get the core frequency for P4-Ms
+ *
+ * Should return the core frequency (in kHz) for P4-Ms.=20
+ */
+static unsigned int pentium4_get_frequency(void)
+{
+ u32 msr_lo, msr_hi;
+
+ rdmsr(0x2c, msr_lo, msr_hi);
+
+ dprintk(KERN_DEBUG "cpufreq: P4 - MSR_EBC_FREQUENCY_ID: 0x%x 0x%x\n", msr=
_lo, msr_hi);
+
+ /* First 12 bits seem to change a lot (0x511, 0x410 and 0x30f seen=20
+ * yet). Next 12 bits always seem to be 0x300. If this is not true=20
+ * on this CPU, complain. Last 8 bits are frequency (in 100MHz).
+ */
+ if (msr_hi || ((msr_lo & 0x00FFF000) !=3D 0x300000)) {
+ printk(KERN_DEBUG "cpufreq: P4 - MSR_EBC_FREQUENCY_ID: 0x%x 0x%x\n", msr=
_lo, msr_hi);
+ printk(KERN_INFO "cpufreq: problem in initialization. Please contact Dom=
inik Brodowski\n");
+ printk(KERN_INFO "cpufreq: <devel@brodo.de> and attach this dmesg. Thank=
s in advance\n");
+ return 0;
+ }
+
+ msr_lo >>=3D 24;
+ return (msr_lo * 100000);
+}
+
+
+/**=20
+ * speedstep_detect_processor - detect Intel SpeedStep-capable processors.
+ *
+ * Returns the SPEEDSTEP_PROCESSOR_-number for the detected chipset,=20
+ * or zero on failure.
+ */
+static unsigned int speedstep_detect_processor (void)
+{
+ struct cpuinfo_x86 *c =3D cpu_data;
+ u32 ebx;
+
+ if ((c->x86_vendor !=3D X86_VENDOR_INTEL) ||=20
+ ((c->x86 !=3D 6) && (c->x86 !=3D 0xF)))
+ return 0;
+
+ if (c->x86 =3D=3D 0xF) {
+ /* Intel Pentium 4 Mobile P4-M */
+ if (c->x86_model !=3D 2)
+ return 0;
+
+ if (c->x86_mask !=3D 4)
+ return 0;
+
+ ebx =3D cpuid_ebx(0x00000001);
+ ebx &=3D 0x000000FF;
+ if ((ebx !=3D 0x0e) && (ebx !=3D 0x0f))
+ return 0;
+
+ return SPEEDSTEP_PROCESSOR_P4M;
+ }
+
+ switch (c->x86_model) {
+ case 0x0B: /* Intel PIII [Tualatin] */
+ /* cpuid_ebx(1) is 0x04 for desktop PIII,=20
+ 0x06 for mobile PIII-M */
+ ebx =3D cpuid_ebx(0x00000001);
+
+ ebx &=3D 0x000000FF;
+ if (ebx !=3D 0x06)
+ return 0;
+
+ /* So far all PIII-M processors support SpeedStep. See
+ * Intel's 24540633.pdf of August 2002=20
+ */
+
+ return SPEEDSTEP_PROCESSOR_PIII_T;
+
+ case 0x08: /* Intel PIII [Coppermine] */
+ /* based on reverse-engineering information and
+ * some guessing. HANDLE WITH CARE! */
+ {
+ u32 msr_lo, msr_hi;
+
+ /* all mobile PIII Coppermines have FSB 100 MHz
+ * =3D=3D> sort out a few desktop PIIIs. */
+ rdmsr(MSR_IA32_EBL_CR_POWERON, msr_lo, msr_hi);
+ dprintk(KERN_DEBUG "cpufreq: Coppermine: MSR_IA32_EBL_Cr_POWERON is 0x%=
x, 0x%x\n", msr_lo, msr_hi);
+ msr_lo &=3D 0x00c0000;
+ if (msr_lo !=3D 0x0080000)
+ return 0;
+
+ /* platform ID seems to be 0x00140000 */
+ rdmsr(MSR_IA32_PLATFORM_ID, msr_lo, msr_hi);
+ dprintk(KERN_DEBUG "cpufreq: Coppermine: MSR_IA32_PLATFORM ID is 0x%x, =
0x%x\n", msr_lo, msr_hi);
+ msr_hi =3D msr_lo & 0x001c0000;
+ if (msr_hi !=3D 0x00140000)
+ return 0;
+
+ /* and these bits seem to be either 00_b, 01_b or
+ * 10_b but never 11_b */
+ msr_lo &=3D 0x00030000;
+ if (msr_lo =3D=3D 0x0030000)
+ return 0;
+
+ /* let's hope this is correct... */
+ return SPEEDSTEP_PROCESSOR_PIII_C;
+ }
+
+ default:
+ return 0;
+ }
+}
+
+
+
+/*********************************************************************
+ * HIGH LEVEL FUNCTIONS *
+ *********************************************************************/
+
+/**
+ * speedstep_detect_speeds - detects low and high CPU frequencies.
+ *
+ * Detects the low and high CPU frequencies in kHz. Returns 0 on
+ * success or -EINVAL / -EIO on problems.=20
+ */
+static int speedstep_detect_speeds (void)
+{
+ unsigned int state;
+ int i, result;
+ =20
+ for (i=3D0; i<2; i++) {
+ /* read the current state */
+ result =3D speedstep_get_state(&state);
+ if (result)
+ return result;
+
+ /* save the correct value, and switch to other */
+ if (state =3D=3D SPEEDSTEP_LOW) {
+ switch (speedstep_processor) {
+ case SPEEDSTEP_PROCESSOR_PIII_C:
+ case SPEEDSTEP_PROCESSOR_PIII_T:
+ speedstep_low_freq =3D pentium3_get_frequency();
+ break;
+ case SPEEDSTEP_PROCESSOR_P4M:
+ speedstep_low_freq =3D pentium4_get_frequency();
+ }
+ speedstep_set_state(SPEEDSTEP_HIGH);
+ } else {
+ switch (speedstep_processor) {
+ case SPEEDSTEP_PROCESSOR_PIII_C:
+ case SPEEDSTEP_PROCESSOR_PIII_T:
+ speedstep_high_freq =3D pentium3_get_frequency();
+ break;
+ case SPEEDSTEP_PROCESSOR_P4M:
+ speedstep_high_freq =3D pentium4_get_frequency();
+ }
+ speedstep_set_state(SPEEDSTEP_LOW);
+ }
+
+ if (!speedstep_low_freq || !speedstep_high_freq ||=20
+ (speedstep_low_freq =3D=3D speedstep_high_freq))
+ return -EIO;
+ }
+
+ return 0;
+}
+
+
+/**
+ * speedstep_setpolicy - set a new CPUFreq policy
+ * @policy: new policy
+ *
+ * Sets a new CPUFreq policy.
+ */
+static void speedstep_setpolicy (struct cpufreq_policy *policy)
+{
+ if (!speedstep_driver || !policy)
+ return;
+
+ if (policy->min > speedstep_low_freq)=20
+ speedstep_set_state(SPEEDSTEP_HIGH);
+ else {
+ if (policy->max < speedstep_high_freq)
+ speedstep_set_state(SPEEDSTEP_LOW);
+ else {
+ /* both frequency states are allowed */
+ if (policy->policy =3D=3D CPUFREQ_POLICY_POWERSAVE)
+ speedstep_set_state(SPEEDSTEP_LOW);
+ else
+ speedstep_set_state(SPEEDSTEP_HIGH);
+ }
+ }
+}
+
+
+/**
+ * speedstep_verify - verifies a new CPUFreq policy
+ * @freq: new policy
+ *
+ * Limit must be within speedstep_low_freq and speedstep_high_freq, with
+ * at least one border included.
+ */
+static void speedstep_verify (struct cpufreq_policy *policy)
+{
+ if (!policy || !speedstep_driver ||=20
+ !speedstep_low_freq || !speedstep_high_freq)
+ return;
+
+ policy->cpu =3D 0; /* UP only */
+
+ cpufreq_verify_within_limits(policy, speedstep_low_freq, speedstep_high_f=
req);
+
+ if ((policy->min > speedstep_low_freq) &&=20
+ (policy->max < speedstep_high_freq))
+ policy->max =3D speedstep_high_freq;
+=09
+ return;
+}
+
+
+/**
+ * speedstep_init - initializes the SpeedStep CPUFreq driver
+ *
+ * Initializes the SpeedStep support. Returns -ENODEV on unsupported
+ * devices, -EINVAL on problems during initiatization, and zero on
+ * success.
+ */
+static int __init speedstep_init(void)
+{
+ int result;
+ unsigned int speed;
+ struct cpufreq_driver *driver;
+
+
+ /* detect chipset */
+ speedstep_chipset =3D speedstep_detect_chipset();
+
+ /* detect chipset */
+ if (speedstep_chipset)
+ speedstep_processor =3D speedstep_detect_processor();
+
+ if ((!speedstep_chipset) || (!speedstep_processor)) {
+ dprintk(KERN_INFO "cpufreq: Intel(R) SpeedStep(TM) for this %s not (yet)=
available.\n", speedstep_processor ? "chipset" : "processor");
+ return -ENODEV;
+ }
+
+ /* startup values, correct ones will be detected later */
+ speedstep_low_freq =3D 1;
+ speedstep_high_freq =3D 2;
+
+ dprintk(KERN_INFO "cpufreq: Intel(R) SpeedStep(TM) support $Revision: 1.4=
8 $\n");
+ dprintk(KERN_DEBUG "cpufreq: chipset 0x%x - processor 0x%x\n",=20
+ speedstep_chipset, speedstep_processor);
+
+ /* activate speedstep support */
+ result =3D speedstep_activate();
+ if (result)
+ return result;
+
+ /* detect low and high frequency */
+ result =3D speedstep_detect_speeds();
+ if (result)
+ return result;
+
+ /* get current speed setting */
+ result =3D speedstep_get_state(&speed);
+ if (result)
+ return result;
+
+ speed =3D (speed =3D=3D SPEEDSTEP_LOW) ? speedstep_low_freq : speedstep_h=
igh_freq;
+
+ dprintk(KERN_INFO "cpufreq: currently at %s speed setting - %i MHz\n",=20
+ (speed =3D=3D speedstep_low_freq) ? "low" : "high",
+ (speed / 1000));
+
+ /* initialization of main "cpufreq" code*/
+ driver =3D kmalloc(sizeof(struct cpufreq_driver) +=20
+ NR_CPUS * sizeof(struct cpufreq_policy), GFP_KERNEL);
+ if (!driver)
+ return -ENOMEM;
+
+ driver->policy =3D (struct cpufreq_policy *) (driver + sizeof(struct cpuf=
req_driver));
+=09
+#ifdef CONFIG_CPU_FREQ_24_API
+ driver->cpu_min_freq =3D speedstep_low_freq;
+ driver->cpu_cur_freq[0] =3D speed;
+#endif
+
+ driver->verify =3D &speedstep_verify;
+ driver->setpolicy =3D &speedstep_setpolicy;
+
+ driver->policy[0].cpu =3D 0;
+ driver->policy[0].min =3D speedstep_low_freq;
+ driver->policy[0].max =3D speedstep_high_freq;
+ driver->policy[0].max_cpu_freq =3D speedstep_high_freq;
+ driver->policy[0].policy =3D (speed =3D=3D speedstep_low_freq) ?=20
+ CPUFREQ_POLICY_POWERSAVE : CPUFREQ_POLICY_PERFORMANCE;
+
+ result =3D cpufreq_register(driver);
+ if (result) {
+ kfree(driver);
+ return result;
+ }
+ speedstep_driver =3D driver;
+
+ return 0;
+}
+
+
+/**
+ * speedstep_exit - unregisters SpeedStep support
+ *
+ * Unregisters SpeedStep support.
+ */
+static void __exit speedstep_exit(void)
+{
+ if (speedstep_driver) {
+ cpufreq_unregister();
+ kfree(speedstep_driver);
+ }
+}
+
+
+MODULE_AUTHOR ("Dave Jones <davej@suse.de>, Dominik Brodowski <devel@brodo=
.de>");
+MODULE_DESCRIPTION ("Speedstep driver for Intel mobile processors.");
+MODULE_LICENSE ("GPL");
+module_init(speedstep_init);
+module_exit(speedstep_exit);
--5L6AZ1aJH5mDrqCQ
Content-Type: application/pgp-signature
Content-Disposition: inline
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.0.6 (GNU/Linux)
Comment: Weitere Infos: siehe http://www.gnupg.org
iD8DBQE9hvc5Z8MDCHJbN8YRAq7kAJ9bbCHsPqLezJo7ophntOZD3AA7/ACglyjB
3Da0PpJRNarTYb0lXJLJTqY=
=19L2
-----END PGP SIGNATURE-----
--5L6AZ1aJH5mDrqCQ--
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/