I am working on the logic changes in the separtation of code.
It is very likely I got some thing backwards but it is easy to test.
Cheers,
On Wed, 21 Aug 2002, Erik Andersen wrote:
> On Wed Aug 21, 2002 at 04:25:39PM -0400, Alan Cox wrote:
> > IDE status
> > Chasing two reports of strange ide-scsi crashes
> > Still some Promise glitches - need to review merge carefully
>
> Its doesn't understand that I indeed am using 80 pin cables for
> the drives connected to my Promise 20267 controller. Also, it would
> be nice to clean up the formatting on the "80-pin cable" message to
> keep it from wrapping.
>
>
>
> Uniform Multi-Platform E-IDE driver Revision: 7.00alpha1
> ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
> PDC20267: IDE controller on PCI bus 00 dev 58
> PDC20267: chipset revision 2
> PDC20267: not 100% native mode: will probe irqs later
> PDC20267: (U)DMA Burst Bit ENABLED Primary PCI Mode Secondary PCI Mode.
> ide2: BM-DMA at 0xb800-0xb807, BIOS settings: hde:DMA, hdf:DMA
> ide3: BM-DMA at 0xb808-0xb80f, BIOS settings: hdg:DMA, hdh:pio
> [-------snip-------]
> hde: IC35L040AVER07-0, ATA DISK drive
> ULTRA 66/100/133: Primary channel of Ultra 66/100/133 requires an 80-pin cable for Ultra66
> operation.
> Switching to Ultra33 mode.
> Warning: Primary channel requires an 80-pin cable for operation.
> hde reduced to Ultra33 mode.
> hdg: WDC WD1200BB-00CAA1, ATA DISK drive
> ULTRA 66/100/133: Secondary channel of Ultra 66/100/133 requires an 80-pin cable for Ultra66
> operation.
> Switching to Ultra33 mode.
> Warning: Secondary channel requires an 80-pin cable for operation.
> hdg reduced to Ultra33 mode.
> [-------snip-------]
> hde: host protected area => 1
> hde: setmax LBA 80418240, native 1992187
> hde: 1992187 sectors (1020 MB) w/1916KiB Cache, CHS=1976/16/63, UDMA(33)
> hdg: host protected area => 1
> hdg: 234441648 sectors (120034 MB) w/2048KiB Cache, CHS=232581/16/63, UDMA(33)
>
>
> -Erik
>
> --
> Erik B. Andersen http://codepoet-consulting.com/
> --This message was written using 73% post-consumer electrons--
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
>
Andre Hedrick
LAD Storage Consulting Group
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/