--==_Exmh_12522815040
Content-Type: text/plain; charset=us-ascii
This patch provides generic discontiguous memory support for the i386
numa architecture. The patch also provides supports for the ia32 IBM
NUMA-Q hardware platform. John Stultz also has added support for the
x440 hardware... which he'll post soon. A version of this patch is in
the 2.4 aa tree.
This patch depends on the paddr->pfn patch that I just sent out.
Assumptions made:
- that the first node has at least 900Mb of memory
Testing done:
- single proc desktop pc (CONFIG_X86_NUMAQ is not set)
- 4 proc SMP system (CONFIG_X86_NUMAQ is not set)
- 4 proc SMP system (CONFIG_X86_NUMAQ is not set, CONFIG_HIGHMEM=64GB)
- 16 proc NUMA box with 4GB memory (CONFIG_X86_NUMAQ=y,
CONFIG_NUMA is not set)
- 16 proc NUMA box with 4GB memory (CONFIG_X86_NUMAQ=y,
CONFIG_NUMA is not set, CONFIG_HIGHMEM=64GB)
- 16 proc NUMA box with 4GB memory (CONFIG_X86_NUMAQ=y,
CONFIG_NUMA=y)
- 16 proc NUMA box with 4GB memory (CONFIG_X86_NUMAQ=y,
CONFIG_NUMA=y, CONFIG_HIGHMEM=64GB)
- 8 proc NUMA box with 8GB memeory (CONFIG_X86_NUMAQ=y,
CONFIG_NUMA=y, CONFIG_HIGHMEM=64GB)
- 16 proc NUMA box with 16GB memory (CONFIG_X86_NUMAQ=y,
CONFIG_NUMA=y, CONFIG_HIGHMEM=64GB)
Any and all feedback regarding this patch is greatly appreciated.
Thanks,
Pat
-- Patricia Gaughen (gone@us.ibm.com) IBM Linux Technology Center http://www.ibm.com/linux/ltc/
--==_Exmh_12522815040 Content-Type: application/x-patch ; name="linux-2.4.20-pre4_discontig_A1.patch" Content-Description: linux-2.4.20-pre4_discontig_A1.patch Content-Disposition: attachment; filename="linux-2.4.20-pre4_discontig_A1.patch"
# This is a BitKeeper generated patch for the following project: # Project Name: Linux kernel tree # This patch format is intended for GNU patch command version 2.5 or higher. # This patch includes the following deltas: # ChangeSet 1.588 -> 1.590 # include/asm-i386/pgtable-2level.h 1.2.1.1 -> 1.5 # arch/sparc/mm/srmmu.c 1.15.1.1 -> 1.18 # mm/page_alloc.c 1.50.1.1 -> 1.52 # include/asm-i386/page.h 1.10 -> 1.11 # include/asm-i386/e820.h 1.1 -> 1.2 # arch/i386/kernel/Makefile 1.3.1.1 -> 1.5 # arch/i386/mm/init.c 1.12.1.1 -> 1.25 # arch/sparc/mm/sun4c.c 1.12.1.1 -> 1.14 # arch/i386/mm/Makefile 1.1.1.1 -> 1.3 # mm/bootmem.c 1.7.1.2 -> 1.9 # arch/i386/config.in 1.28.1.7 -> 1.35 # include/asm-i386/io.h 1.10.1.1 -> 1.14 # arch/i386/kernel/setup.c 1.44.1.9 -> 1.52 # include/asm-i386/setup.h 1.1 -> 1.3 # include/asm-i386/pgtable.h 1.6.1.1 -> 1.9 # include/asm-i386/pgtable-3level.h 1.3.1.1 -> 1.5 # include/linux/bootmem.h 1.1.1.1 -> 1.3 # Documentation/Configure.help 1.120 -> 1.121 # (new) -> 1.9 arch/i386/mm/discontig.c # (new) -> 1.5 include/asm-i386/mmzone.h # (new) -> 1.3 arch/i386/kernel/numaq.c # (new) -> 1.2 include/asm-i386/numaq.h # # The following is the BitKeeper ChangeSet Log # -------------------------------------------- # 02/08/19 gaughen@w-gaughen.beaverton.ibm.com 1.589 # o had to merge with pre4. # -------------------------------------------- # 02/08/19 gaughen@w-gaughen.beaverton.ibm.com 1.590 # o bad merge. it's the tool not me, right? :-) # -------------------------------------------- # diff -Nru a/Documentation/Configure.help b/Documentation/Configure.help --- a/Documentation/Configure.help Mon Aug 19 19:46:08 2002 +++ b/Documentation/Configure.help Mon Aug 19 19:46:09 2002 @@ -244,8 +244,13 @@ avaliability. Boot without "notsc" and install a i386 compiled glibc to solve the problem. +Multi-node NUMA system support +CONFIG_X86_NUMA + Choose this to see more system support and feature options for + multi-node NUMA systems. + Multiquad support for NUMA systems -CONFIG_MULTIQUAD +CONFIG_X86_NUMAQ This option is used for getting Linux to run on a (IBM/Sequent) NUMA multiquad box. This changes the way that processors are bootstrapped, and uses Clustered Logical APIC addressing mode instead of Flat Logical. diff -Nru a/arch/i386/config.in b/arch/i386/config.in --- a/arch/i386/config.in Mon Aug 19 19:46:08 2002 +++ b/arch/i386/config.in Mon Aug 19 19:46:08 2002 @@ -216,7 +216,22 @@ define_bool CONFIG_X86_IO_APIC y fi else - bool 'Multiquad NUMA system' CONFIG_MULTIQUAD + bool 'Multi-node NUMA system support' CONFIG_X86_NUMA + if [ "$CONFIG_X86_NUMA" = "y" ]; then + #Platform Choices + bool ' Multiquad (IBM/Sequent) NUMAQ support' CONFIG_X86_NUMAQ + if [ "$CONFIG_X86_NUMAQ" = "y" ]; then + define_bool CONFIG_MULTIQUAD y + fi + # Common NUMA Features + if [ "$CONFIG_X86_NUMAQ" = "y" ]; then + bool ' Numa Memory Allocation Support' CONFIG_NUMA + if [ "$CONFIG_NUMA" = "y" ]; then + define_bool CONFIG_DISCONTIGMEM y + define_bool CONFIG_HAVE_ARCH_BOOTMEM_NODE y + fi + fi + fi fi bool 'Unsynced TSC support' CONFIG_X86_TSC_DISABLE diff -Nru a/arch/i386/kernel/Makefile b/arch/i386/kernel/Makefile --- a/arch/i386/kernel/Makefile Mon Aug 19 19:46:08 2002 +++ b/arch/i386/kernel/Makefile Mon Aug 19 19:46:08 2002 @@ -40,5 +40,6 @@ obj-$(CONFIG_X86_LOCAL_APIC) += mpparse.o apic.o nmi.o obj-$(CONFIG_X86_IO_APIC) += io_apic.o acpitable.o obj-$(CONFIG_X86_VISWS_APIC) += visws_apic.o +obj-$(CONFIG_X86_NUMAQ) += numaq.o include $(TOPDIR)/Rules.make diff -Nru a/arch/i386/kernel/numaq.c b/arch/i386/kernel/numaq.c --- /dev/null Wed Dec 31 16:00:00 1969 +++ b/arch/i386/kernel/numaq.c Mon Aug 19 19:46:09 2002 @@ -0,0 +1,143 @@ +/* + * Written by: Patricia Gaughen, IBM Corporation + * + * Copyright (C) 2002, IBM Corp. + * + * All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for more + * details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + * Send feedback to <gone@us.ibm.com> + */ + +#include <linux/config.h> +#include <linux/mm.h> +#include <linux/bootmem.h> +#include <linux/mmzone.h> +#include <asm/numaq.h> + +u64 nodes_mem_start[MAX_NUMNODES]; +u64 nodes_mem_size[MAX_NUMNODES]; + +/* + * Function: smp_dump_qct() + * + * Description: gets memory layout from the quad config table. This + * function also increments numnodes with the number of nodes (quads) + * present. + */ +static void __init smp_dump_qct(void) +{ + int node; + struct eachquadmem *eq; + struct sys_cfg_data *scd = + (struct sys_cfg_data *)__va(SYS_CFG_DATA_PRIV_ADDR); + +#define MB_TO_B(addr) ((addr) << 20) + numnodes = 0; + for(node = 0; node < MAX_NUMNODES; node++) { + if(scd->quads_present31_0 & (1 << node)) { + numnodes++; + eq = &scd->eq[node]; + /* Convert to bytes */ + nodes_mem_start[node] = MB_TO_B((u64)eq->hi_shrd_mem_start - + (u64)eq->priv_mem_size); + nodes_mem_size[node] = MB_TO_B((u64)eq->hi_shrd_mem_size + + (u64)eq->priv_mem_size); + } + } +} + +/* + * ----------------------------------------- + * + * functions related to physnode_map + * + * ----------------------------------------- + */ +/* + * physnode_map keeps track of the physical memory layout of the + * numaq nodes on a 256Mb break (each element of the array will + * represent 256Mb of memory and will be marked by the node id. so, + * if the first gig is on node 0, and the second gig is on node 1 + * physnode_map will contain: + * physnode_map[0-3] = 0; + * physnode_map[4-7] = 1; + * physnode_map[8- ] = -1; + */ +int physnode_map[MAX_ELEMENTS] = { [0 ... (MAX_ELEMENTS - 1)] = -1}; + +#define MB_TO_ELEMENT(x) (x >> ELEMENT_REPRESENTS) +#define PA_TO_MB(pa) (pa >> 20) /* assumption: a physical address is in bytes */ + +int numaqpa_to_nid(u64 pa) +{ + int nid; + + nid = physnode_map[MB_TO_ELEMENT(PA_TO_MB(pa))]; + + /* the physical address passed in is not in the map for the system */ + if (nid == -1) + BUG(); + + return nid; +} + +int numaqpfn_to_nid(unsigned long pfn) +{ + return numaqpa_to_nid(((u64)pfn) << PAGE_SHIFT); +} + +/* + * for each node mark the regions + * TOPOFMEM = hi_shrd_mem_start + hi_shrd_mem_size + * + * need to be very careful to not mark 1024+ as belonging + * to node 0. will want 1027 to show as belonging to node 1 + * example: + * TOPOFMEM = 1024 + * 1024 >> 8 = 4 (subtract 1 for starting at 0] + * tmpvar = TOPOFMEM - 256 = 768 + * 1024 >> 8 = 4 (subtract 1 for starting at 0] + * + */ +static void __init initialize_physnode_map(void) +{ + int nid; + unsigned int topofmem, cur; + struct eachquadmem *eq; + struct sys_cfg_data *scd = + (struct sys_cfg_data *)__va(SYS_CFG_DATA_PRIV_ADDR); + + + for(nid = 0; nid < numnodes; nid++) { + if(scd->quads_present31_0 & (1 << nid)) { + eq = &scd->eq[nid]; + cur = eq->hi_shrd_mem_start; + topofmem = eq->hi_shrd_mem_start + eq->hi_shrd_mem_size; + while (cur < topofmem) { + physnode_map[cur >> 8] = nid; + cur += (ELEMENT_REPRESENTS - 1); + } + } + } +} + +void __init get_memcfg_numaq(void) +{ + smp_dump_qct(); + initialize_physnode_map(); +} diff -Nru a/arch/i386/kernel/setup.c b/arch/i386/kernel/setup.c --- a/arch/i386/kernel/setup.c Mon Aug 19 19:46:08 2002 +++ b/arch/i386/kernel/setup.c Mon Aug 19 19:46:08 2002 @@ -115,6 +115,7 @@ #include <asm/dma.h> #include <asm/mpspec.h> #include <asm/mmu_context.h> +#include <asm/setup.h> /* * Machine setup.. */ @@ -174,29 +175,6 @@ int enable_acpi_smp_table; -/* - * This is set up by the setup-routine at boot-time - */ -#define PARAM ((unsigned char *)empty_zero_page) -#define SCREEN_INFO (*(struct screen_info *) (PARAM+0)) -#define EXT_MEM_K (*(unsigned short *) (PARAM+2)) -#define ALT_MEM_K (*(unsigned long *) (PARAM+0x1e0)) -#define E820_MAP_NR (*(char*) (PARAM+E820NR)) -#define E820_MAP ((struct e820entry *) (PARAM+E820MAP)) -#define APM_BIOS_INFO (*(struct apm_bios_info *) (PARAM+0x40)) -#define DRIVE_INFO (*(struct drive_info_struct *) (PARAM+0x80)) -#define SYS_DESC_TABLE (*(struct sys_desc_table_struct*)(PARAM+0xa0)) -#define MOUNT_ROOT_RDONLY (*(unsigned short *) (PARAM+0x1F2)) -#define RAMDISK_FLAGS (*(unsigned short *) (PARAM+0x1F8)) -#define ORIG_ROOT_DEV (*(unsigned short *) (PARAM+0x1FC)) -#define AUX_DEVICE_INFO (*(unsigned char *) (PARAM+0x1FF)) -#define LOADER_TYPE (*(unsigned char *) (PARAM+0x210)) -#define KERNEL_START (*(unsigned long *) (PARAM+0x214)) -#define INITRD_START (*(unsigned long *) (PARAM+0x218)) -#define INITRD_SIZE (*(unsigned long *) (PARAM+0x21c)) -#define COMMAND_LINE ((char *) (PARAM+2048)) -#define COMMAND_LINE_SIZE 256 - #define RAMDISK_IMAGE_START_MASK 0x07FF #define RAMDISK_PROMPT_FLAG 0x8000 #define RAMDISK_LOAD_FLAG 0x4000 @@ -813,20 +791,10 @@ } } -#define PFN_UP(x) (((x) + PAGE_SIZE-1) >> PAGE_SHIFT) -#define PFN_DOWN(x) ((x) >> PAGE_SHIFT) -#define PFN_PHYS(x) ((x) << PAGE_SHIFT) - -/* - * Reserved space for vmalloc and iomap - defined in asm/page.h - */ -#define MAXMEM_PFN PFN_DOWN(MAXMEM) -#define MAX_NONPAE_PFN (1 << 20) - /* * Find the highest page frame number we have available */ -static void __init find_max_pfn(void) +void __init find_max_pfn(void) { int i; @@ -848,7 +816,7 @@ /* * Determine low and high memory ranges: */ -static unsigned long __init find_max_low_pfn(void) +unsigned long __init find_max_low_pfn(void) { unsigned long max_low_pfn; @@ -904,6 +872,7 @@ return max_low_pfn; } +#ifndef CONFIG_DISCONTIGMEM /* * Register fully available low RAM pages with the bootmem allocator. */ @@ -1025,6 +994,9 @@ return max_low_pfn; } +#else +extern unsigned long __init setup_memory(void); +#endif /* !CONFIG_DISCONTIGMEM */ /* * Request address space for all standard RAM and ROM resources diff -Nru a/arch/i386/mm/Makefile b/arch/i386/mm/Makefile --- a/arch/i386/mm/Makefile Mon Aug 19 19:46:08 2002 +++ b/arch/i386/mm/Makefile Mon Aug 19 19:46:08 2002 @@ -11,5 +11,6 @@ obj-y := init.o fault.o ioremap.o extable.o pageattr.o export-objs := pageattr.o +obj-$(CONFIG_DISCONTIGMEM) += discontig.o include $(TOPDIR)/Rules.make diff -Nru a/arch/i386/mm/discontig.c b/arch/i386/mm/discontig.c --- /dev/null Wed Dec 31 16:00:00 1969 +++ b/arch/i386/mm/discontig.c Mon Aug 19 19:46:09 2002 @@ -0,0 +1,312 @@ +/* + * Written by: Patricia Gaughen, IBM Corporation + * + * Copyright (C) 2002, IBM Corp. + * + * All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for more + * details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + * Send feedback to <gone@us.ibm.com> + */ + +#include <linux/config.h> +#include <linux/mm.h> +#include <linux/bootmem.h> +#include <linux/mmzone.h> +#include <linux/highmem.h> +#ifdef CONFIG_BLK_DEV_RAM +#include <linux/blk.h> +#endif +#include <asm/e820.h> +#include <asm/setup.h> + +struct pfns { + unsigned long start_pfn; + unsigned long max_pfn; +}; + +struct plat_pglist_data *plat_node_data[MAX_NUMNODES]; +bootmem_data_t plat_node_bdata; +struct pfns plat_node_bootpfns[MAX_NUMNODES]; + +extern unsigned long find_max_low_pfn(void); +extern void find_max_pfn(void); +extern void one_highpage_init(struct page *, int, int); +extern inline int page_is_ram (unsigned long); + +extern u64 nodes_mem_start[], nodes_mem_size[]; +extern struct e820map e820; +extern char _end; +extern unsigned long highend_pfn, highstart_pfn; +extern unsigned long max_low_pfn; +extern unsigned long totalram_pages; +extern unsigned long totalhigh_pages; + +/* + * Find the highest page frame number we have available for the node + */ +static void __init find_max_pfn_node(int nid) +{ + unsigned long node_datasz; + unsigned long start, end; + + start = plat_node_bootpfns[nid].start_pfn = PFN_UP(nodes_mem_start[nid]); + end = PFN_DOWN(nodes_mem_start[nid]) + PFN_DOWN(nodes_mem_size[nid]); + + if (start >= end) { + BUG(); + } + if (end > max_pfn) { + end = max_pfn; + } + plat_node_bootpfns[nid].max_pfn = end; + + node_datasz = PFN_UP(sizeof(struct plat_pglist_data)); + PLAT_NODE_DATA(nid) = (struct plat_pglist_data *)(__va(min_low_pfn << PAGE_SHIFT)); + min_low_pfn += node_datasz; +} + +/* + * Register fully available low RAM pages with the bootmem allocator. + */ +static void __init register_bootmem_low_pages(unsigned long system_max_low_pfn) +{ + int i; + + for (i = 0; i < e820.nr_map; i++) { + unsigned long curr_pfn, last_pfn, size; + /* + * Reserve usable low memory + */ + if (e820.map[i].type != E820_RAM) + continue; + /* + * We are rounding up the start address of usable memory: + */ + curr_pfn = PFN_UP(e820.map[i].addr); + if (curr_pfn >= system_max_low_pfn) + continue; + /* + * ... and at the end of the usable range downwards: + */ + last_pfn = PFN_DOWN(e820.map[i].addr + e820.map[i].size); + + if (last_pfn > system_max_low_pfn) + last_pfn = system_max_low_pfn; + + /* + * .. finally, did all the rounding and playing + * around just make the area go away? + */ + if (last_pfn <= curr_pfn) + continue; + + size = last_pfn - curr_pfn; + free_bootmem_node(NODE_DATA(0), PFN_PHYS(curr_pfn), PFN_PHYS(size)); + } +} + +unsigned long __init setup_memory(void) +{ + int nid; + unsigned long bootmap_size, system_start_pfn, system_max_low_pfn; + + get_memcfg_numa(); + + /* + * partially used pages are not usable - thus + * we are rounding upwards: + */ + system_start_pfn = min_low_pfn = PFN_UP(__pa(&_end)); + + find_max_pfn(); + system_max_low_pfn = max_low_pfn = find_max_low_pfn(); + +#ifdef CONFIG_HIGHMEM + highstart_pfn = highend_pfn = max_pfn; + if (max_pfn > system_max_low_pfn) { + highstart_pfn = system_max_low_pfn; + } + printk(KERN_NOTICE "%ldMB HIGHMEM available.\n", + pages_to_mb(highend_pfn - highstart_pfn)); +#endif + printk(KERN_NOTICE "%ldMB LOWMEM available.\n", + pages_to_mb(system_max_low_pfn)); + + for (nid = 0; nid < numnodes; nid++) + { + find_max_pfn_node(nid); + + } + + NODE_DATA(0)->bdata = &plat_node_bdata; + + /* + * Initialize the boot-time allocator (with low memory only): + */ + bootmap_size = init_bootmem_node(NODE_DATA(0), min_low_pfn, 0, system_max_low_pfn); + + register_bootmem_low_pages(system_max_low_pfn); + + /* + * Reserve the bootmem bitmap itself as well. We do this in two + * steps (first step was init_bootmem()) because this catches + * the (very unlikely) case of us accidentally initializing the + * bootmem allocator with an invalid RAM area. + */ + reserve_bootmem_node(NODE_DATA(0), HIGH_MEMORY, (PFN_PHYS(min_low_pfn) + + bootmap_size + PAGE_SIZE-1) - (HIGH_MEMORY)); + + /* + * reserve physical page 0 - it's a special BIOS page on many boxes, + * enabling clean reboots, SMP operation, laptop functions. + */ + reserve_bootmem_node(NODE_DATA(0), 0, PAGE_SIZE); + + /* + * But first pinch a few for the stack/trampoline stuff + * FIXME: Don't need the extra page at 4K, but need to fix + * trampoline before removing it. (see the GDT stuff) + */ + reserve_bootmem_node(NODE_DATA(0), PAGE_SIZE, PAGE_SIZE); + + /* + * Find and reserve possible boot-time SMP configuration: + */ + find_smp_config(); + + /*insert other nodes into pgdat_list*/ + for (nid = 1; nid < numnodes; nid++){ + NODE_DATA(nid)->node_next = pgdat_list; + pgdat_list = NODE_DATA(nid); + } + + +#ifdef CONFIG_BLK_DEV_INITRD + if (LOADER_TYPE && INITRD_START) { + if (INITRD_START + INITRD_SIZE <= (system_max_low_pfn << PAGE_SHIFT)) { + reserve_bootmem_node(NODE_DATA(0), INITRD_START, INITRD_SIZE); + initrd_start = + INITRD_START ? INITRD_START + PAGE_OFFSET : 0; + initrd_end = initrd_start+INITRD_SIZE; + } + else { + printk(KERN_ERR "initrd extends beyond end of memory " + "(0x%08lx > 0x%08lx)\ndisabling initrd\n", + INITRD_START + INITRD_SIZE, + system_max_low_pfn << PAGE_SHIFT); + initrd_start = 0; + } + } +#endif + return system_max_low_pfn; +} + +void __init zone_sizes_init(void) +{ + int nid; + + for (nid = 0; nid < numnodes; nid++) { + unsigned long zones_size[MAX_NR_ZONES] = {0, 0, 0}; + unsigned int max_dma; + + unsigned long low = max_low_pfn; + unsigned long high = plat_node_bootpfns[nid].max_pfn; + unsigned long start = plat_node_bootpfns[nid].start_pfn; + + max_dma = virt_to_phys((char *)MAX_DMA_ADDRESS) >> PAGE_SHIFT; + + if (start > low) { +#ifdef CONFIG_HIGHMEM + zones_size[ZONE_HIGHMEM] = high - start; +#endif + } else { + if (low < max_dma) + zones_size[ZONE_DMA] = low; + else { + zones_size[ZONE_DMA] = max_dma; + zones_size[ZONE_NORMAL] = low - max_dma; +#ifdef CONFIG_HIGHMEM + zones_size[ZONE_HIGHMEM] = high - low; +#endif + } + } + free_area_init_node(nid, NODE_DATA(nid), 0, zones_size, start, 0); + } +} + + +int __init free_pages_init(int bad_ppro) +{ + extern int ppro_with_ram_bug(void); + int reservedpages; + int nid; + unsigned long pfn; + + bad_ppro = ppro_with_ram_bug(); + + /* this will put all low memory onto the freelists */ + totalram_pages += free_all_bootmem_node(NODE_DATA(0)); + + reservedpages = 0; + for (pfn = 0; pfn < max_low_pfn; pfn++) + /* + * Only count reserved RAM pages + */ + if (page_is_ram(pfn) && PageReserved(mem_map+pfn)) + reservedpages++; +#ifdef CONFIG_HIGHMEM + for (nid = 0; nid < numnodes; nid++) { + unsigned long node_pfn, node_high_size, zone_start_pfn; + struct page * zone_mem_map; + + node_high_size = NODE_DATA(nid)->node_zones[ZONE_HIGHMEM].size; + zone_mem_map = NODE_DATA(nid)->node_zones[ZONE_HIGHMEM].zone_mem_map; + zone_start_pfn = NODE_DATA(nid)->node_zones[ZONE_HIGHMEM].zone_start_pfn; + + printk("Initializing highpages for node %d\n", nid); + for (node_pfn = 0; node_pfn < node_high_size; node_pfn++) { + one_highpage_init((struct page *)(zone_mem_map + node_pfn), + zone_start_pfn + node_pfn, bad_ppro); + } + } + totalram_pages += totalhigh_pages; +#endif + return reservedpages; +} + +void __init set_max_mapnr_init(void) +{ +#ifdef CONFIG_HIGHMEM + unsigned long lmax_mapnr; + int nid; + + highmem_start_page = mem_map + NODE_DATA(0)->node_zones[ZONE_HIGHMEM].zone_start_mapnr; + num_physpages = highend_pfn; + num_mappedpages = max_low_pfn; + + for (nid = 0; nid < numnodes; nid++) { + lmax_mapnr = PLAT_NODE_DATA_STARTNR(nid) + PLAT_NODE_DATA_SIZE(nid); + if (lmax_mapnr > max_mapnr) { + max_mapnr = lmax_mapnr; + } + } + +#else + max_mapnr = num_mappedpages = num_physpages = max_low_pfn; +#endif +} diff -Nru a/arch/i386/mm/init.c b/arch/i386/mm/init.c --- a/arch/i386/mm/init.c Mon Aug 19 19:46:08 2002 +++ b/arch/i386/mm/init.c Mon Aug 19 19:46:08 2002 @@ -40,8 +40,8 @@ mmu_gather_t mmu_gathers[NR_CPUS]; unsigned long highstart_pfn, highend_pfn; -static unsigned long totalram_pages; -static unsigned long totalhigh_pages; +unsigned long totalram_pages; +unsigned long totalhigh_pages; int do_check_pgt_cache(int low, int high) { @@ -320,6 +320,7 @@ flush_tlb_all(); } +#ifndef CONFIG_DISCONTIGMEM static void __init zone_sizes_init(void) { unsigned long zones_size[MAX_NR_ZONES] = {0, 0, 0}; @@ -340,6 +341,9 @@ } free_area_init(zones_size); } +#else +extern void __init zone_sizes_init(void); +#endif /* !CONFIG_DISCONTIGMEM */ /* * paging_init() sets up the page tables - note that the first 8MB are @@ -417,28 +421,6 @@ } } -static inline int page_is_ram (unsigned long pagenr) -{ - int i; - - for (i = 0; i < e820.nr_map; i++) { - unsigned long addr, end; - - if (e820.map[i].type != E820_RAM) /* not usable memory */ - continue; - /* - * !!!FIXME!!! Some BIOSen report areas as RAM that - * are not. Notably the 640->1Mb area. We need a sanity - * check here. - */ - addr = (e820.map[i].addr+PAGE_SIZE-1) >> PAGE_SHIFT; - end = (e820.map[i].addr+e820.map[i].size) >> PAGE_SHIFT; - if ((pagenr >= addr) && (pagenr < end)) - return 1; - } - return 0; -} - static inline int page_kills_ppro(unsigned long pagenr) { if(pagenr >= 0x70000 && pagenr <= 0x7003F) @@ -467,6 +449,7 @@ } #endif /* CONFIG_HIGHMEM */ +#ifndef CONFIG_DISCONTIGMEM static void __init set_max_mapnr_init(void) { #ifdef CONFIG_HIGHMEM @@ -503,6 +486,10 @@ #endif return reservedpages; } +#else +extern int __init free_pages_init(void); +extern void __init set_max_mapnr_init(void); +#endif /* !CONFIG_DISCONTIGMEM */ void __init mem_init(void) { diff -Nru a/include/asm-i386/e820.h b/include/asm-i386/e820.h --- a/include/asm-i386/e820.h Mon Aug 19 19:46:08 2002 +++ b/include/asm-i386/e820.h Mon Aug 19 19:46:08 2002 @@ -35,6 +35,29 @@ }; extern struct e820map e820; + +static inline int page_is_ram (unsigned long pagenr) +{ + int i; + + for (i = 0; i < e820.nr_map; i++) { + unsigned long addr, end; + + if (e820.map[i].type != E820_RAM) /* not usable memory */ + continue; + /* + * !!!FIXME!!! Some BIOSen report areas as RAM that + * are not. Notably the 640->1Mb area. We need a sanity + * check here. + */ + addr = (e820.map[i].addr+PAGE_SIZE-1) >> PAGE_SHIFT; + end = (e820.map[i].addr+e820.map[i].size) >> PAGE_SHIFT; + if ((pagenr >= addr) && (pagenr < end)) + return 1; + } + return 0; +} + #endif/*!__ASSEMBLY__*/ #endif/*__E820_HEADER*/ diff -Nru a/include/asm-i386/io.h b/include/asm-i386/io.h --- a/include/asm-i386/io.h Mon Aug 19 19:46:08 2002 +++ b/include/asm-i386/io.h Mon Aug 19 19:46:08 2002 @@ -100,10 +100,22 @@ * Change "struct page" to physical address. */ #ifdef CONFIG_HIGHMEM64G + +#ifndef CONFIG_DISCONTIGMEM #define page_to_phys(page) ((u64)(page - mem_map) << PAGE_SHIFT) #else +#define page_to_phys(page) ((u64)((page - page_zone(page)->zone_mem_map) + page_zone(page)->zone_start_pfn)<<PAGE_SHIFT) +#endif /* !CONFIG_DISCONTIGMEM */ + +#else + +#ifndef CONFIG_DISCONTIGMEM #define page_to_phys(page) ((page - mem_map) << PAGE_SHIFT) -#endif +#else +#define page_to_phys(page) (((page - page_zone(page)->zone_mem_map) + page_zone(page)->zone_start_pfn) << PAGE_SHIFT) +#endif /* !CONFIG_DISCONTIGMEM */ + +#endif /* CONFIG_HIGHMEM64G */ extern void * __ioremap(unsigned long offset, unsigned long size, unsigned long flags); diff -Nru a/include/asm-i386/mmzone.h b/include/asm-i386/mmzone.h --- /dev/null Wed Dec 31 16:00:00 1969 +++ b/include/asm-i386/mmzone.h Mon Aug 19 19:46:09 2002 @@ -0,0 +1,103 @@ +/* + * Written by Pat Gaughen (gone@us.ibm.com) Mar 2002 + * + */ + +#ifndef _ASM_MMZONE_H_ +#define _ASM_MMZONE_H_ + +#ifdef CONFIG_DISCONTIGMEM + +#ifdef CONFIG_X86_NUMAQ +#include <asm/numaq.h> +#else +#define PHYSADDR_TO_NID(pa) (0) +#define PFN_TO_NID(pfn) (0) +#define MAX_NUMNODES 1 +#ifdef CONFIG_NUMA +#define _cpu_to_node(cpu) 0 +#endif /* CONFIG_NUMA */ +#endif /* CONFIG_X86_NUMAQ */ + +#ifdef CONFIG_NUMA +#define numa_node_id() _cpu_to_node(smp_processor_id()) +#endif /* CONFIG_NUMA */ + +struct plat_pglist_data { + pg_data_t gendata; +}; + +extern struct plat_pglist_data *plat_node_data[]; + +/* + * Following are macros that are specific to this numa platform. + */ +#define reserve_bootmem(addr, size) \ + reserve_bootmem_node(NODE_DATA(0), (addr), (size)) +#define alloc_bootmem(x) \ + __alloc_bootmem_node(NODE_DATA(0), (x), SMP_CACHE_BYTES, __pa(MAX_DMA_ADDRESS)) +#define alloc_bootmem_low(x) \ + __alloc_bootmem_node(NODE_DATA(0), (x), SMP_CACHE_BYTES, 0) +#define alloc_bootmem_pages(x) \ + __alloc_bootmem_node(NODE_DATA(0), (x), PAGE_SIZE, __pa(MAX_DMA_ADDRESS)) +#define alloc_bootmem_low_pages(x) \ + __alloc_bootmem_node(NODE_DATA(0), (x), PAGE_SIZE, 0) +#define alloc_bootmem_node(ignore, x) \ + __alloc_bootmem_node(NODE_DATA(0), (x), SMP_CACHE_BYTES, __pa(MAX_DMA_ADDRESS)) +#define alloc_bootmem_pages_node(ignore, x) \ + __alloc_bootmem_node(NODE_DATA(0), (x), PAGE_SIZE, __pa(MAX_DMA_ADDRESS)) +#define alloc_bootmem_low_pages_node(ignore, x) \ + __alloc_bootmem_node(NODE_DATA(0), (x), PAGE_SIZE, 0) + +#define PLAT_NODE_DATA(n) (plat_node_data[(n)]) +#define PLAT_NODE_DATA_STARTNR(n) \ + (PLAT_NODE_DATA(n)->gendata.node_start_mapnr) +#define PLAT_NODE_DATA_SIZE(n) (PLAT_NODE_DATA(n)->gendata.node_size) +#define PLAT_NODE_DATA_LOCALNR(pfn, n) \ + ((pfn) - PLAT_NODE_DATA(n)->gendata.node_start_pfn) + +/* + * Following are macros that each numa implmentation must define. + */ + +/* + * Given a kernel address, find the home node of the underlying memory. + */ +#define KVADDR_TO_NID(kaddr) PHYSADDR_TO_NID(__pa(kaddr)) + +/* + * Return a pointer to the node data for node n. + */ +#define NODE_DATA(n) (&((PLAT_NODE_DATA(n))->gendata)) + +/* + * NODE_MEM_MAP gives the kaddr for the mem_map of the node. + */ +#define NODE_MEM_MAP(nid) (NODE_DATA(nid)->node_mem_map) + +/* + * Given a kaddr, ADDR_TO_MAPBASE finds the owning node of the memory + * and returns the the mem_map of that node. + */ +#define ADDR_TO_MAPBASE(kaddr) \ + NODE_MEM_MAP(KVADDR_TO_NID((unsigned long)(kaddr))) + +/* + * Given a kaddr, LOCAL_BASE_ADDR finds the owning node of the memory + * and returns the kaddr corresponding to first physical page in the + * node's mem_map. + */ +#define LOCAL_BASE_ADDR(kaddr) ((unsigned long)__va(NODE_DATA(KVADDR_TO_NID(kaddr))->node_start_pfn << PAGE_SHIFT)) + +#define LOCAL_MAP_NR(kvaddr) \ + (((unsigned long)(kvaddr)-LOCAL_BASE_ADDR(kvaddr)) >> PAGE_SHIFT) + +#define kern_addr_valid(kaddr) test_bit(LOCAL_MAP_NR(kaddr), \ + NODE_DATA(KVADDR_TO_NID(kaddr))->valid_addr_bitmap) + +#define virt_to_page(kaddr) (ADDR_TO_MAPBASE(kaddr) + LOCAL_MAP_NR(kaddr)) +/* This does not check the holes between lmem_maps */ +#define VALID_PAGE(page) (((page) - mem_map) < max_mapnr) + +#endif /* CONFIG_DISCONTIGMEM */ +#endif /* _ASM_MMZONE_H_ */ diff -Nru a/include/asm-i386/numaq.h b/include/asm-i386/numaq.h --- /dev/null Wed Dec 31 16:00:00 1969 +++ b/include/asm-i386/numaq.h Mon Aug 19 19:46:09 2002 @@ -0,0 +1,179 @@ +/* + * Written by: Patricia Gaughen, IBM Corporation + * + * Copyright (C) 2002, IBM Corp. + * + * All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for more + * details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + * Send feedback to <gone@us.ibm.com> + */ + +#ifndef NUMAQ_H +#define NUMAQ_H + +#ifdef CONFIG_X86_NUMAQ + +#include <asm/smpboot.h> + +/* + * for now assume that 64Gb is max amount of RAM for whole system + * 64Gb * 1024Mb/Gb = 65536 Mb + * 65536 Mb / 256Mb = 256 + */ +#define MAX_ELEMENTS 256 +#define ELEMENT_REPRESENTS 8 /* 256 Mb */ + +#define PHYSADDR_TO_NID(pa) numaqpa_to_nid(pa) +#define PFN_TO_NID(pa) numaqpfn_to_nid(pa) +#define MAX_NUMNODES 8 +#ifdef CONFIG_NUMA +#define _cpu_to_node(cpu) (cpu_to_logical_apicid(cpu) >> 4) +#endif /* CONFIG_NUMA */ +extern int numaqpa_to_nid(u64); +extern int numaqpfn_to_nid(unsigned long); +extern void get_memcfg_numaq(void); +#define get_memcfg_numa() get_memcfg_numaq() + +/* + * SYS_CFG_DATA_PRIV_ADDR, struct eachquadmem, and struct sys_cfg_data are the + */ +#define SYS_CFG_DATA_PRIV_ADDR 0x0009d000 /* place for scd in private quad space */ + +/* + * Communication area for each processor on lynxer-processor tests. + * + * NOTE: If you change the size of this eachproc structure you need + * to change the definition for EACH_QUAD_SIZE. + */ +struct eachquadmem { + unsigned int priv_mem_start; /* Starting address of this */ + /* quad's private memory. */ + /* This is always 0. */ + /* In MB. */ + unsigned int priv_mem_size; /* Size of this quad's */ + /* private memory. */ + /* In MB. */ + unsigned int low_shrd_mem_strp_start;/* Starting address of this */ + /* quad's low shared block */ + /* (untranslated). */ + /* In MB. */ + unsigned int low_shrd_mem_start; /* Starting address of this */ + /* quad's low shared memory */ + /* (untranslated). */ + /* In MB. */ + unsigned int low_shrd_mem_size; /* Size of this quad's low */ + /* shared memory. */ + /* In MB. */ + unsigned int lmmio_copb_start; /* Starting address of this */ + /* quad's local memory */ + /* mapped I/O in the */ + /* compatibility OPB. */ + /* In MB. */ + unsigned int lmmio_copb_size; /* Size of this quad's local */ + /* memory mapped I/O in the */ + /* compatibility OPB. */ + /* In MB. */ + unsigned int lmmio_nopb_start; /* Starting address of this */ + /* quad's local memory */ + /* mapped I/O in the */ + /* non-compatibility OPB. */ + /* In MB. */ + unsigned int lmmio_nopb_size; /* Size of this quad's local */ + /* memory mapped I/O in the */ + /* non-compatibility OPB. */ + /* In MB. */ + unsigned int io_apic_0_start; /* Starting address of I/O */ + /* APIC 0. */ + unsigned int io_apic_0_sz; /* Size I/O APIC 0. */ + unsigned int io_apic_1_start; /* Starting address of I/O */ + /* APIC 1. */ + unsigned int io_apic_1_sz; /* Size I/O APIC 1. */ + unsigned int hi_shrd_mem_start; /* Starting address of this */ + /* quad's high shared memory.*/ + /* In MB. */ + unsigned int hi_shrd_mem_size; /* Size of this quad's high */ + /* shared memory. */ + /* In MB. */ + unsigned int mps_table_addr; /* Address of this quad's */ + /* MPS tables from BIOS, */ + /* in system space.*/ + unsigned int lcl_MDC_pio_addr; /* Port-I/O address for */ + /* local access of MDC. */ + unsigned int rmt_MDC_mmpio_addr; /* MM-Port-I/O address for */ + /* remote access of MDC. */ + unsigned int mm_port_io_start; /* Starting address of this */ + /* quad's memory mapped Port */ + /* I/O space. */ + unsigned int mm_port_io_size; /* Size of this quad's memory*/ + /* mapped Port I/O space. */ + unsigned int mm_rmt_io_apic_start; /* Starting address of this */ + /* quad's memory mapped */ + /* remote I/O APIC space. */ + unsigned int mm_rmt_io_apic_size; /* Size of this quad's memory*/ + /* mapped remote I/O APIC */ + /* space. */ + unsigned int mm_isa_start; /* Starting address of this */ + /* quad's memory mapped ISA */ + /* space (contains MDC */ + /* memory space). */ + unsigned int mm_isa_size; /* Size of this quad's memory*/ + /* mapped ISA space (contains*/ + /* MDC memory space). */ + unsigned int rmt_qmi_addr; /* Remote addr to access QMI.*/ + unsigned int lcl_qmi_addr; /* Local addr to access QMI. */ +}; + +/* + * Note: This structure must be NOT be changed unless the multiproc and + * OS are changed to reflect the new structure. + */ +struct sys_cfg_data { + unsigned int quad_id; + unsigned int bsp_proc_id; /* Boot Strap Processor in this quad. */ + unsigned int scd_version; /* Version number of this table. */ + unsigned int first_quad_id; + unsigned int quads_present31_0; /* 1 bit for each quad */ + unsigned int quads_present63_32; /* 1 bit for each quad */ + unsigned int config_flags; + unsigned int boot_flags; + unsigned int csr_start_addr; /* Absolute value (not in MB) */ + unsigned int csr_size; /* Absolute value (not in MB) */ + unsigned int lcl_apic_start_addr; /* Absolute value (not in MB) */ + unsigned int lcl_apic_size; /* Absolute value (not in MB) */ + unsigned int low_shrd_mem_base; /* 0 or 512MB or 1GB */ + unsigned int low_shrd_mem_quad_offset; /* 0,128M,256M,512M,1G */ + /* may not be totally populated */ + unsigned int split_mem_enbl; /* 0 for no low shared memory */ + unsigned int mmio_sz; /* Size of total system memory mapped I/O */ + /* (in MB). */ + unsigned int quad_spin_lock; /* Spare location used for quad */ + /* bringup. */ + unsigned int nonzero55; /* For checksumming. */ + unsigned int nonzeroaa; /* For checksumming. */ + unsigned int scd_magic_number; + unsigned int system_type; + unsigned int checksum; + /* + * memory configuration area for each quad + */ + struct eachquadmem eq[MAX_NUMNODES]; /* indexed by quad id */ +}; + +#endif /* CONFIG_X86_NUMAQ */ +#endif /* NUMAQ_H */ + diff -Nru a/include/asm-i386/page.h b/include/asm-i386/page.h --- a/include/asm-i386/page.h Mon Aug 19 19:46:08 2002 +++ b/include/asm-i386/page.h Mon Aug 19 19:46:08 2002 @@ -131,8 +131,10 @@ #define MAXMEM ((unsigned long)(-PAGE_OFFSET-VMALLOC_RESERVE)) #define __pa(x) ((unsigned long)(x)-PAGE_OFFSET) #define __va(x) ((void *)((unsigned long)(x)+PAGE_OFFSET)) +#ifndef CONFIG_DISCONTIGMEM #define virt_to_page(kaddr) (mem_map + (__pa(kaddr) >> PAGE_SHIFT)) #define VALID_PAGE(page) ((page - mem_map) < max_mapnr) +#endif /* !CONFIG_DISCONTIGMEM */ #define VM_DATA_DEFAULT_FLAGS (VM_READ | VM_WRITE | VM_EXEC | \ VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC) diff -Nru a/include/asm-i386/pgtable-2level.h b/include/asm-i386/pgtable-2level.h --- a/include/asm-i386/pgtable-2level.h Mon Aug 19 19:46:08 2002 +++ b/include/asm-i386/pgtable-2level.h Mon Aug 19 19:46:08 2002 @@ -58,7 +58,14 @@ } #define ptep_get_and_clear(xp) __pte(xchg(&(xp)->pte_low, 0)) #define pte_same(a, b) ((a).pte_low == (b).pte_low) + +#ifndef CONFIG_DISCONTIGMEM #define pte_page(x) (mem_map+((unsigned long)(((x).pte_low >> PAGE_SHIFT)))) +#else +#define pte_page(x) (NODE_MEM_MAP(PHYSADDR_TO_NID((x).pte_low)) + PLAT_NODE_DATA_LOCALNR(((unsigned long)((x).pte_low >> PAGE_SHIFT)), PHYSADDR_TO_NID((x).pte_low))) +#define __pmd_page(x) (NODE_MEM_MAP(PHYSADDR_TO_NID((x).pmd_low)) + PLAT_NODE_DATA_LOCALNR((((x).pmd_low >> PAGE_SHIFT)), PHYSADDR_TO_NID((x).pmd_low))) +#endif /* !CONFIG_DISCONTIGMEM */ + #define pte_none(x) (!(x).pte_low) #define __mk_pte(page_nr,pgprot) __pte(((page_nr) << PAGE_SHIFT) | pgprot_val(pgprot)) diff -Nru a/include/asm-i386/pgtable-3level.h b/include/asm-i386/pgtable-3level.h --- a/include/asm-i386/pgtable-3level.h Mon Aug 19 19:46:08 2002 +++ b/include/asm-i386/pgtable-3level.h Mon Aug 19 19:46:08 2002 @@ -89,7 +89,13 @@ return a.pte_low == b.pte_low && a.pte_high == b.pte_high; } +#ifndef CONFIG_DISCONTIGMEM #define pte_page(x) (mem_map+(((x).pte_low >> PAGE_SHIFT) | ((x).pte_high << (32 - PAGE_SHIFT)))) +#else +/* pte_page = lmem_map + nodelocal_pfn */ +#define pte_pfn(x) (((x).pte_low >> PAGE_SHIFT) | ((x).pte_high << (32 - PAGE_SHIFT))) +#define pte_page(x) (NODE_MEM_MAP(PFN_TO_NID(pte_pfn(x))) + PLAT_NODE_DATA_LOCALNR(pte_pfn(x), PFN_TO_NID(pte_pfn(x)))) +#endif /* !CONFIG_DISCONTIGMEM */ #define pte_none(x) (!(x).pte_low && !(x).pte_high) static inline pte_t __mk_pte(unsigned long page_nr, pgprot_t pgprot) diff -Nru a/include/asm-i386/pgtable.h b/include/asm-i386/pgtable.h --- a/include/asm-i386/pgtable.h Mon Aug 19 19:46:08 2002 +++ b/include/asm-i386/pgtable.h Mon Aug 19 19:46:08 2002 @@ -297,9 +297,12 @@ * Conversion functions: convert a page and protection to a page entry, * and a page entry and page directory to the page they refer to. */ - +#ifndef CONFIG_DISCONTIGMEM #define mk_pte(page, pgprot) __mk_pte((page) - mem_map, (pgprot)) - +#else +#define mk_pte(page, pgprot) __mk_pte(((page) - page_zone(page)->zone_mem_map + (page_zone(page)->zone_start_pfn)), (pgprot)) +#endif /* !CONFIG_DISCONTIGMEM */ + /* This takes a physical page address that is used by the remapping functions */ #define mk_pte_phys(physpage, pgprot) __mk_pte((physpage) >> PAGE_SHIFT, pgprot) @@ -354,7 +357,10 @@ /* Needs to be defined here and not in linux/mm.h, as it is arch dependent */ #define PageSkip(page) (0) + +#ifndef CONFIG_DISCONTIGMEM #define kern_addr_valid(addr) (1) +#endif /* !CONFIG_DISCONTIGMEM */ #define io_remap_page_range remap_page_range diff -Nru a/include/asm-i386/setup.h b/include/asm-i386/setup.h --- a/include/asm-i386/setup.h Mon Aug 19 19:46:08 2002 +++ b/include/asm-i386/setup.h Mon Aug 19 19:46:08 2002 @@ -1,10 +1,37 @@ -/* - * Just a place holder. We don't want to have to test x86 before - * we include stuff - */ - #ifndef _i386_SETUP_H #define _i386_SETUP_H +#define PFN_UP(x) (((x) + PAGE_SIZE-1) >> PAGE_SHIFT) +#define PFN_DOWN(x) ((x) >> PAGE_SHIFT) +#define PFN_PHYS(x) ((x) << PAGE_SHIFT) + +/* + * Reserved space for vmalloc and iomap - defined in asm/page.h + */ +#define MAXMEM_PFN PFN_DOWN(MAXMEM) +#define MAX_NONPAE_PFN (1 << 20) + +/* + * This is set up by the setup-routine at boot-time + */ +#define PARAM ((unsigned char *)empty_zero_page) +#define SCREEN_INFO (*(struct screen_info *) (PARAM+0)) +#define EXT_MEM_K (*(unsigned short *) (PARAM+2)) +#define ALT_MEM_K (*(unsigned long *) (PARAM+0x1e0)) +#define E820_MAP_NR (*(char*) (PARAM+E820NR)) +#define E820_MAP ((struct e820entry *) (PARAM+E820MAP)) +#define APM_BIOS_INFO (*(struct apm_bios_info *) (PARAM+0x40)) +#define DRIVE_INFO (*(struct drive_info_struct *) (PARAM+0x80)) +#define SYS_DESC_TABLE (*(struct sys_desc_table_struct*)(PARAM+0xa0)) +#define MOUNT_ROOT_RDONLY (*(unsigned short *) (PARAM+0x1F2)) +#define RAMDISK_FLAGS (*(unsigned short *) (PARAM+0x1F8)) +#define ORIG_ROOT_DEV (*(unsigned short *) (PARAM+0x1FC)) +#define AUX_DEVICE_INFO (*(unsigned char *) (PARAM+0x1FF)) +#define LOADER_TYPE (*(unsigned char *) (PARAM+0x210)) +#define KERNEL_START (*(unsigned long *) (PARAM+0x214)) +#define INITRD_START (*(unsigned long *) (PARAM+0x218)) +#define INITRD_SIZE (*(unsigned long *) (PARAM+0x21c)) +#define COMMAND_LINE ((char *) (PARAM+2048)) +#define COMMAND_LINE_SIZE 256 #endif /* _i386_SETUP_H */ diff -Nru a/include/linux/bootmem.h b/include/linux/bootmem.h --- a/include/linux/bootmem.h Mon Aug 19 19:46:08 2002 +++ b/include/linux/bootmem.h Mon Aug 19 19:46:08 2002 @@ -32,9 +32,10 @@ extern unsigned long __init bootmem_bootmap_pages (unsigned long); extern unsigned long __init init_bootmem (unsigned long addr, unsigned long memend); -extern void __init reserve_bootmem (unsigned long addr, unsigned long size); extern void __init free_bootmem (unsigned long addr, unsigned long size); extern void * __init __alloc_bootmem (unsigned long size, unsigned long align, unsigned long goal); +#ifndef CONFIG_HAVE_ARCH_BOOTMEM_NODE +extern void __init reserve_bootmem (unsigned long addr, unsigned long size); #define alloc_bootmem(x) \ __alloc_bootmem((x), SMP_CACHE_BYTES, __pa(MAX_DMA_ADDRESS)) #define alloc_bootmem_low(x) \ @@ -43,6 +44,7 @@ __alloc_bootmem((x), PAGE_SIZE, __pa(MAX_DMA_ADDRESS)) #define alloc_bootmem_low_pages(x) \ __alloc_bootmem((x), PAGE_SIZE, 0) +#endif /* !CONFIG_HAVE_ARCH_BOOTMEM_NODE */ extern unsigned long __init free_all_bootmem (void); extern unsigned long __init init_bootmem_node (pg_data_t *pgdat, unsigned long freepfn, unsigned long startpfn, unsigned long endpfn); @@ -50,11 +52,13 @@ extern void __init free_bootmem_node (pg_data_t *pgdat, unsigned long addr, unsigned long size); extern unsigned long __init free_all_bootmem_node (pg_data_t *pgdat); extern void * __init __alloc_bootmem_node (pg_data_t *pgdat, unsigned long size, unsigned long align, unsigned long goal); +#ifndef CONFIG_HAVE_ARCH_BOOTMEM_NODE #define alloc_bootmem_node(pgdat, x) \ __alloc_bootmem_node((pgdat), (x), SMP_CACHE_BYTES, __pa(MAX_DMA_ADDRESS)) #define alloc_bootmem_pages_node(pgdat, x) \ __alloc_bootmem_node((pgdat), (x), PAGE_SIZE, __pa(MAX_DMA_ADDRESS)) #define alloc_bootmem_low_pages_node(pgdat, x) \ __alloc_bootmem_node((pgdat), (x), PAGE_SIZE, 0) +#endif /* !CONFIG_HAVE_ARCH_BOOTMEM_NODE */ #endif /* _LINUX_BOOTMEM_H */ diff -Nru a/mm/bootmem.c b/mm/bootmem.c --- a/mm/bootmem.c Mon Aug 19 19:46:08 2002 +++ b/mm/bootmem.c Mon Aug 19 19:46:08 2002 @@ -308,10 +308,12 @@ return(init_bootmem_core(&contig_page_data, start, 0, pages)); } +#ifndef CONFIG_HAVE_ARCH_BOOTMEM_NODE void __init reserve_bootmem (unsigned long addr, unsigned long size) { reserve_bootmem_core(contig_page_data.bdata, addr, size); } +#endif /* !CONFIG_HAVE_ARCH_BOOTMEM_NODE */ void __init free_bootmem (unsigned long addr, unsigned long size) {
--==_Exmh_12522815040--
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/