1.
-- ld error while compiling kernel2.
-- ld produced the following error while compiling kernel version 2.4.18 :make -C drm modules make[3]: Entering directory `/usr/src/linux/drivers/char/drm' ld -m elf_i386 -r -o radeon.o radeon_drv.o radeon_cp.o radeon_state.o ld: BFD 2.12.90.0.1 20020307 Debian/GNU Linux internal error, aborting at ../../bfd/elflink.h line 6208 in elf_link_output_extsym
ld: Please report this bug.
make[3]: *** [radeon.o] Error 1 make[3]: Leaving directory `/usr/src/linux/drivers/char/drm' make[2]: *** [_modsubdir_drm] Error 2 make[2]: Leaving directory `/usr/src/linux/drivers/char' make[1]: *** [_modsubdir_char] Error 2 make[1]: Leaving directory `/usr/src/linux/drivers' make: *** [_mod_drivers] Error 2
4.
-- Linux version 2.4.18 (root@boutique) (gcc version 2.95.4 20011002 (Debian prerelease)) #1 Fri Jul 26 00:05:59 CEST 20027.1 (ver_linux)
--- Linux void 2.4.18 #1 Fri Jul 26 00:05:59 CEST 2002 i686 unknownGnu C 3.0.4 Gnu make 3.79.1 util-linux 2.11n mount 2.11n modutils 2.4.15 e2fsprogs 1.27 PPP 2.4.1 Linux C Library 2.2.5 Dynamic linker (ldd) 2.2.5 Procps 2.0.7 Net-tools 1.60 Console-tools 0.2.3 Sh-utils 2.0.11
7.2 (/proc/cpuinfo)
--- processor : 0 vendor_id : AuthenticAMD cpu family : 6 model : 6 model name : AMD Athlon(TM) XP 1800+ stepping : 2 cpu MHz : 1532.941 cache size : 256 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 1 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr sse syscall mmxext 3dnowext 3dnow bogomips : 3060.537.3 (/proc/modules)
--- not exists7.4 (/proc/ioports & /proc/iomem)
--- /proc/ioports:0000-001f : dma1 0020-003f : pic1 0040-005f : timer 0060-006f : keyboard 0070-007f : rtc 0080-008f : dma page reg 00a0-00bf : pic2 00c0-00df : dma2 00f0-00ff : fpu 0170-0177 : ide1 01f0-01f7 : ide0 0376-0376 : ide1 03c0-03df : vga+ 03f6-03f6 : ide0 0cf8-0cff : PCI conf1 9000-901f : VIA Technologies, Inc. UHCI USB (#4) 9400-941f : VIA Technologies, Inc. UHCI USB (#3) 9800-980f : VIA Technologies, Inc. Bus Master IDE 9800-9807 : ide0 9808-980f : ide1 a000-a0ff : Accton Technology Corporation EN-1216 Ethernet Adapter a000-a0ff : tulip a400-a407 : Creative Labs SB Live! a800-a81f : Creative Labs SB Live! EMU10k1 b000-b01f : VIA Technologies, Inc. UHCI USB (#2) b400-b41f : VIA Technologies, Inc. UHCI USB b800-b8ff : C-Media Electronics Inc CM8738 d000-dfff : PCI Bus #01 d800-d8ff : PCI device 1002:514c (ATI Technologies Inc)
/proc/iomem:
00000000-0009fbff : System RAM 0009fc00-0009ffff : reserved 000a0000-000bffff : Video RAM area 000c0000-000c7fff : Video ROM 000f0000-000fffff : System ROM 00100000-0fffbfff : System RAM 00100000-00275bd1 : Kernel code 00275bd2-002ddb77 : Kernel data 0fffc000-0fffefff : ACPI Tables 0ffff000-0fffffff : ACPI Non-volatile Storage d6000000-d60003ff : Accton Technology Corporation EN-1216 Ethernet Adapter d6000000-d60003ff : tulip d6800000-d68000ff : PCI device 1106:3104 (VIA Technologies, Inc.) d7000000-d7dfffff : PCI Bus #01 d7000000-d700ffff : PCI device 1002:514c (ATI Technologies Inc) d7f00000-dfffffff : PCI Bus #01 d8000000-dfffffff : PCI device 1002:514c (ATI Technologies Inc) e0000000-e3ffffff : VIA Technologies, Inc. VT8367 [KT266] fec00000-fec00fff : reserved fee00000-fee00fff : reserved ffff0000-ffffffff : reserved
7.5 (pci info)
--- 00:00.0 Host bridge: VIA Technologies, Inc. VT8367 [KT266] Subsystem: Asustek Computer, Inc.: Unknown device 807f Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Latency: 0 Region 0: Memory at e0000000 (32-bit, prefetchable) [size=64M] Capabilities: [a0] AGP version 2.0 Status: RQ=31 SBA+ 64bit- FW- Rate=x1,x2 Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none> Capabilities: [c0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-00:01.0 PCI bridge: VIA Technologies, Inc. VT8367 [KT266 AGP] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Latency: 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: d7000000-d7dfffff Prefetchable memory behind bridge: d7f00000-dfffffff BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B- Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:05.0 Multimedia audio controller: C-Media Electronics Inc CM8738 (rev 10) Subsystem: Asustek Computer, Inc.: Unknown device 80e2 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (500ns min, 6000ns max) Interrupt: pin A routed to IRQ 10 Region 0: I/O ports at b800 [size=256] Capabilities: [c0] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:09.0 USB Controller: VIA Technologies, Inc. UHCI USB (rev 50) (prog-if 00 [UHCI]) Subsystem: Asustek Computer, Inc.: Unknown device 8080 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32, cache line size 08 Interrupt: pin A routed to IRQ 3 Region 4: I/O ports at b400 [size=32] Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:09.1 USB Controller: VIA Technologies, Inc. UHCI USB (rev 50) (prog-if 00 [UHCI]) Subsystem: Asustek Computer, Inc.: Unknown device 8080 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32, cache line size 08 Interrupt: pin B routed to IRQ 11 Region 4: I/O ports at b000 [size=32] Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:09.2 USB Controller: VIA Technologies, Inc.: Unknown device 3104 (rev 51) (prog-if 20) Subsystem: Asustek Computer, Inc.: Unknown device 8080 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32, cache line size 08 Interrupt: pin C routed to IRQ 10 Region 0: Memory at d6800000 (32-bit, non-prefetchable) [size=256] Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0d.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 08) Subsystem: Creative Labs: Unknown device 8064 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (500ns min, 5000ns max) Interrupt: pin A routed to IRQ 11 Region 0: I/O ports at a800 [size=32] Capabilities: [dc] Power Management version 2 Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0d.1 Input device controller: Creative Labs SB Live! (rev 08) Subsystem: Creative Labs Gameport Joystick Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 Region 0: I/O ports at a400 [size=8] Capabilities: [dc] Power Management version 2 Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0f.0 Ethernet controller: Accton Technology Corporation EN-1216 Ethernet Adapter (rev 11) Subsystem: Standard Microsystems Corp [SMC]: Unknown device 1255 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (63750ns min, 63750ns max), cache line size 08 Interrupt: pin A routed to IRQ 4 Region 0: I/O ports at a000 [size=256] Region 1: Memory at d6000000 (32-bit, non-prefetchable) [size=1K] Expansion ROM at <unassigned> [disabled] [size=128K] Capabilities: [c0] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=100mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:11.0 ISA bridge: VIA Technologies, Inc.: Unknown device 3147 Subsystem: Asustek Computer, Inc.: Unknown device 808c Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Capabilities: [c0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:11.1 IDE interface: VIA Technologies, Inc. Bus Master IDE (rev 06) (prog-if 8a [Master SecP PriP]) Subsystem: Asustek Computer, Inc.: Unknown device 808c Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 Interrupt: pin A routed to IRQ 0 Region 4: I/O ports at 9800 [size=16] Capabilities: [c0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:11.2 USB Controller: VIA Technologies, Inc. UHCI USB (rev 23) (prog-if 00 [UHCI]) Subsystem: Asustek Computer, Inc.: Unknown device 808c Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32, cache line size 08 Interrupt: pin D routed to IRQ 7 Region 4: I/O ports at 9400 [size=32] Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:11.3 USB Controller: VIA Technologies, Inc. UHCI USB (rev 23) (prog-if 00 [UHCI]) Subsystem: Asustek Computer, Inc.: Unknown device 808c Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32, cache line size 08 Interrupt: pin D routed to IRQ 7 Region 4: I/O ports at 9000 [size=32] Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
01:00.0 VGA compatible controller: ATI Technologies Inc: Unknown device 514c (prog-if 00 [VGA]) Subsystem: ATI Technologies Inc: Unknown device 013a Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (2000ns min), cache line size 08 Interrupt: pin A routed to IRQ 11 Region 0: Memory at d8000000 (32-bit, prefetchable) [size=128M] Region 1: I/O ports at d800 [size=256] Region 2: Memory at d7000000 (32-bit, non-prefetchable) [size=64K] Expansion ROM at d7fe0000 [disabled] [size=128K] Capabilities: [58] AGP version 2.0 Status: RQ=47 SBA+ 64bit- FW+ Rate=x1,x2 Command: RQ=0 SBA+ AGP- 64bit- FW- Rate=<none> Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
7.6 (scsi)
--- not exists
bege
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/