Hello Linus,
The i2c & lm_sensors group would like to submit these 9
patches from our stable 2.6.3 package.
This group of patches adds hardware sensor for boards and
chips. They are considered stable and have been in use
since March 2002.
Over the next weeks we will be updating the kernel with our
beta release 2.6.4 and documentation patches.
Thanks,
Albert
-- Albert Cranford Deerfield Beach FL USA ac9410@bellsouth.net --------------9FE02636018FCF664B757BCB Content-Type: text/plain; charset=us-ascii; name="2.5.26-config-patch" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="2.5.26-config-patch"--- linux-2.5.26.clean/drivers/i2c/Config.in.orig 2002-05-20 09:58:09.000000000 -0400 +++ linux/drivers/i2c/Config.in 2002-05-20 10:00:17.000000000 -0400 @@ -45,5 +45,7 @@ dep_tristate 'I2C device interface' CONFIG_I2C_CHARDEV $CONFIG_I2C dep_tristate 'I2C /proc interface (required for hardware sensors)' CONFIG_I2C_PROC $CONFIG_I2C $CONFIG_SYSCTL + source drivers/i2c/busses/Config.in + source drivers/i2c/chips/Config.in fi endmenu --- linux-2.5.26.clean/drivers/i2c/Makefile.orig 2002-06-09 19:37:29.000000000 -0400 +++ linux/drivers/i2c/Makefile 2002-06-09 19:32:33.000000000 -0400 @@ -16,6 +16,8 @@ obj-$(CONFIG_ITE_I2C_ALGO) += i2c-algo-ite.o obj-$(CONFIG_ITE_I2C_ADAP) += i2c-adap-ite.o obj-$(CONFIG_I2C_PROC) += i2c-proc.o +obj-$(CONFIG_MAINBOARD) += busses/ +obj-$(CONFIG_SENSORS) += chips/ # This is needed for automatic patch generation: sensors code starts here # This is needed for automatic patch generation: sensors code ends here --- /dev/null 1994-07-17 19:46:18.000000000 -0400 +++ linux/drivers/i2c/busses/Config.in 2002-05-20 10:00:58.000000000 -0400 @@ -0,0 +1,32 @@ +# +# Sensor device configuration +# All depend on CONFIG_I2C_PROC. +# ISA-only devices depend on CONFIG_I2C_ISA also. +# + +if [ "$CONFIG_I2C" = "m" -o "$CONFIG_I2C" = "y" ] ; then +if [ "$CONFIG_I2C_PROC" = "m" -o "$CONFIG_I2C_PROC" = "y" ] ; then + mainmenu_option next_comment + comment 'Hardware sensors mainboard support' + + dep_mbool 'Hardware sensors mainboard support' CONFIG_MAINBOARD $CONFIG_I2C $CONFIG_I2C_PROC + + if [ "$CONFIG_MAINBOARD" = "y" ]; then + tristate ' Acer Labs ALI 1535' CONFIG_I2C_ALI1535 + tristate ' Acer Labs ALI 1533 and 1543C' CONFIG_I2C_ALI15X3 + tristate ' AMD 756/766' CONFIG_I2C_AMD756 + dep_tristate ' Apple Hydra Mac I/O' CONFIG_I2C_HYDRA $CONFIG_I2C_ALGOBIT + tristate ' Intel 82801AA, 82801AB and 82801BA' CONFIG_I2C_I801 + dep_tristate ' Intel i810AA, i810AB and i815' CONFIG_I2C_I810 $CONFIG_I2C_ALGOBIT + tristate ' Pseudo ISA adapter (for some hardware sensors)' CONFIG_I2C_ISA + tristate ' Intel 82371AB PIIX4(E), ServerWorks OSB4/CSB5' CONFIG_I2C_PIIX4 + tristate ' SiS 5595' CONFIG_I2C_SIS5595 + dep_tristate ' DEC Tsunami I2C interface' CONFIG_I2C_TSUNAMI $CONFIG_I2C_ALGOBIT + dep_tristate ' VIA Technologies, Inc. VT82C586B' CONFIG_I2C_VIA $CONFIG_I2C_ALGOBIT + tristate ' VIA Technologies, Inc. VT596A/B' CONFIG_I2C_VIAPRO + dep_tristate ' Voodoo3 I2C interface' CONFIG_I2C_VOODOO3 $CONFIG_I2C_ALGOBIT + fi +endmenu +fi +fi + --- /dev/null 1994-07-17 19:46:18.000000000 -0400 +++ linux/drivers/i2c/busses/Makefile 2002-05-20 02:09:47.000000000 -0400 @@ -0,0 +1,27 @@ +# +# Makefile for the kernel hardware sensors bus drivers. +# + +MOD_LIST_NAME := SENSORS_BUS_MODULES + +export-objs := i2c-ali1535.o + +obj-$(CONFIG_I2C_ALI1535) += i2c-ali1535.o +obj-$(CONFIG_I2C_ALI15X3) += i2c-ali15x3.o +obj-$(CONFIG_I2C_AMD756) += i2c-amd756.o +obj-$(CONFIG_I2C_HYDRA) += i2c-hydra.o +obj-$(CONFIG_I2C_I801) += i2c-i801.o +obj-$(CONFIG_I2C_I810) += i2c-i810.o +obj-$(CONFIG_I2C_ISA) += i2c-isa.o +obj-$(CONFIG_I2C_KEYWEST) += i2c-keywest.o +obj-$(CONFIG_I2C_PIIX4) += i2c-piix4.o +obj-$(CONFIG_I2C_SIS5595) += i2c-sis5595.o +ifeq ($(MACHINE),alpha) + obj-$(CONFIG_I2C_TSUNAMI) += i2c-tsunami.o +endif +obj-$(CONFIG_I2C_VIA) += i2c-via.o +obj-$(CONFIG_I2C_VIAPRO) += i2c-viapro.o +obj-$(CONFIG_I2C_VOODOO3) += i2c-voodoo3.o + + +include $(TOPDIR)/Rules.make --- /dev/null 1994-07-17 19:46:18.000000000 -0400 +++ linux/drivers/i2c/chips/Config.in 2002-05-19 23:40:48.000000000 -0400 @@ -0,0 +1,46 @@ +# +# Sensor device configuration +# All depend on CONFIG_I2C_PROC. +# ISA-only devices depend on CONFIG_I2C_ISA also. +# + +if [ "$CONFIG_I2C" = "m" -o "$CONFIG_I2C" = "y" ] ; then +if [ "$CONFIG_I2C_PROC" = "m" -o "$CONFIG_I2C_PROC" = "y" ] ; then + mainmenu_option next_comment + comment 'Hardware sensors chip support' + + dep_mbool 'Hardware sensors chip support' CONFIG_SENSORS $CONFIG_I2C $CONFIG_I2C_PROC + + if [ "$CONFIG_SENSORS" != "n" ]; then + dep_tristate ' Analog Devices ADM1021 and compatibles' CONFIG_SENSORS_ADM1021 $CONFIG_I2C $CONFIG_I2C_PROC + dep_tristate ' Analog Devices ADM1024' CONFIG_SENSORS_ADM1024 $CONFIG_I2C $CONFIG_I2C_PROC + dep_tristate ' Analog Devices ADM1025' CONFIG_SENSORS_ADM1025 $CONFIG_I2C $CONFIG_I2C_PROC + dep_tristate ' Analog Devices ADM9240 and compatibles' CONFIG_SENSORS_ADM9240 $CONFIG_I2C $CONFIG_I2C_PROC + dep_tristate ' Dallas DS1621 and DS1625' CONFIG_SENSORS_DS1621 $CONFIG_I2C $CONFIG_I2C_PROC + dep_tristate ' Fujitsu-Siemens Poseidon' CONFIG_SENSORS_FSCPOS $CONFIG_I2C $CONFIG_I2C_PROC + dep_tristate ' Fujitsu-Siemens Scylla' CONFIG_SENSORS_FSCSCY $CONFIG_I2C $CONFIG_I2C_PROC + dep_tristate ' Genesys Logic GL518SM' CONFIG_SENSORS_GL518SM $CONFIG_I2C $CONFIG_I2C_PROC + dep_tristate ' Genesys Logic GL520SM' CONFIG_SENSORS_GL520SM $CONFIG_I2C $CONFIG_I2C_PROC + dep_tristate ' HP Maxilife' CONFIG_SENSORS_MAXILIFE $CONFIG_I2C $CONFIG_I2C_PROC + dep_tristate ' ITE 8705/8712, SiS950' CONFIG_SENSORS_IT87 $CONFIG_I2C $CONFIG_I2C_PROC + dep_tristate ' Myson MTP008' CONFIG_SENSORS_MTP008 $CONFIG_I2C $CONFIG_I2C_PROC + dep_tristate ' National Semiconductors LM75 and compatibles' CONFIG_SENSORS_LM75 $CONFIG_I2C $CONFIG_I2C_PROC + dep_tristate ' National Semiconductors LM78' CONFIG_SENSORS_LM78 $CONFIG_I2C $CONFIG_I2C_PROC + dep_tristate ' National Semiconductors LM80' CONFIG_SENSORS_LM80 $CONFIG_I2C $CONFIG_I2C_PROC + dep_tristate ' National Semiconductors LM87' CONFIG_SENSORS_LM87 $CONFIG_I2C $CONFIG_I2C_PROC + dep_tristate ' Silicon Integrated Systems Corp. SiS5595' CONFIG_SENSORS_SIS5595 $CONFIG_I2C $CONFIG_I2C_PROC $CONFIG_I2C_ISA + dep_tristate ' Texas Instruments THMC50 and compatibles' CONFIG_SENSORS_THMC50 $CONFIG_I2C $CONFIG_I2C_PROC + dep_tristate ' VIA 686a Integrated Hardware Monitor' CONFIG_SENSORS_VIA686A $CONFIG_I2C $CONFIG_I2C_PROC $CONFIG_I2C_ISA + dep_tristate ' Winbond W83781D, W83782D, W83783S, W83627HF, Asus AS99127F' CONFIG_SENSORS_W83781D $CONFIG_I2C $CONFIG_I2C_PROC + bool 'Other I2C devices' CONFIG_SENSORS_OTHER + if [ "$CONFIG_SENSORS_OTHER" = "y" ] ; then + dep_tristate ' Brooktree BT869 Video Modulator' CONFIG_SENSORS_BT869 $CONFIG_I2C $CONFIG_I2C_PROC + dep_tristate ' DDC Monitor EDID EEPROM' CONFIG_SENSORS_DDCMON $CONFIG_I2C $CONFIG_I2C_PROC + dep_tristate ' EEprom (DIMM) reader ' CONFIG_SENSORS_EEPROM $CONFIG_I2C $CONFIG_I2C_PROC + dep_tristate ' Matrix-Orbital LCD Displays' CONFIG_SENSORS_MATORB $CONFIG_I2C $CONFIG_I2C_PROC + fi + fi + endmenu +fi +fi + --- /dev/null 1994-07-17 19:46:18.000000000 -0400 +++ linux/drivers/i2c/chips/Makefile 2002-05-20 02:22:58.000000000 -0400 @@ -0,0 +1,37 @@ +# +# Makefile for the kernel hardware sensors chip drivers. +# + +MOD_LIST_NAME := SENSORS_CHIPS_MODULES + +obj-$(CONFIG_SENSORS) += sensors.o +obj-$(CONFIG_SENSORS_ADM1021) += adm1021.o +obj-$(CONFIG_SENSORS_ADM1024) += adm1024.o +obj-$(CONFIG_SENSORS_ADM1025) += adm1025.o +obj-$(CONFIG_SENSORS_ADM9240) += adm9240.o +obj-$(CONFIG_SENSORS_BT869) += bt869.o +obj-$(CONFIG_SENSORS_DDCMON) += ddcmon.o +obj-$(CONFIG_SENSORS_DS1621) += ds1621.o +obj-$(CONFIG_SENSORS_EEPROM) += eeprom.o +obj-$(CONFIG_SENSORS_FSCPOS) += fscpos.o +obj-$(CONFIG_SENSORS_FSCSCY) += fscscy.o +obj-$(CONFIG_SENSORS_GL518SM) += gl518sm.o +obj-$(CONFIG_SENSORS_GL520SM) += gl520sm.o +obj-$(CONFIG_SENSORS_ICSPLL) += icspll.o +obj-$(CONFIG_SENSORS_IT87) += it87.o +obj-$(CONFIG_SENSORS_LM75) += lm75.o +obj-$(CONFIG_SENSORS_LM78) += lm78.o +obj-$(CONFIG_SENSORS_LM80) += lm80.o +obj-$(CONFIG_SENSORS_LM87) += lm87.o +obj-$(CONFIG_SENSORS_LTC1710) += ltc1710.o +obj-$(CONFIG_SENSORS_MATORB) += matorb.o +obj-$(CONFIG_SENSORS_MAXILIFE) += maxilife.o +obj-$(CONFIG_SENSORS_MTP008) += mtp008.o +obj-$(CONFIG_SENSORS_PCF8574) += pcf8574.o +obj-$(CONFIG_SENSORS_PCF8591) += pcf8591.o +obj-$(CONFIG_SENSORS_SIS5595) += sis5595.o +obj-$(CONFIG_SENSORS_THMC50) += thmc50.o +obj-$(CONFIG_SENSORS_VIA686A) += via686a.o +obj-$(CONFIG_SENSORS_W83781D) += w83781d.o + +include $(TOPDIR)/Rules.make
--------------9FE02636018FCF664B757BCB--
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/