Re: 2.5.26 : drivers/scsi/BusLogic.c

[Zwane Mwaikambo]

On Thu, 18 Jul 2002, Doug Ledford wrote:

> Attached you will find a patch that compiles cleanly, but is totally 
> untested.  Testing would be appreciated.  I suspect FlashPoint controllers 
> *might* have a problem, but MultiMaster (or whatever they are called) 
> should work properly.  WARNING: This could eat a filesystem, it's totally 
> untested DMA mapping code and I have *no* BusLogic controllers to do any 
> sort of verifications with.  The brave at heart are needed to let me know 
> if this thing works ;-)

Boots and is in multiuser right now =) I'll thrash it about right now and 
see if anything falls over. However i commented out scsi_mark_host_reset, 
but it doesn't seem to be defined anywhere.

Thanks,
	Zwane

scsi: ***** BusLogic SCSI Driver Version 2.1.16 of 18 July 2002 *****
scsi: Copyright 1995-1998 by Leonard N. Zubkoff <[e-mail]>
scsi0: Configuring BusLogic Model BT-958 PCI Wide Ultra SCSI Host 
Adapter
scsi0:   Firmware Version: 5.07B, I/O Address: 0x1080, IRQ Channel: 
11/Level
scsi0:   PCI Bus: 0, Device: 16, Address: 0xFD000000, Host Adapter SCSI 
ID: 7
scsi0:   Parity Checking: Enabled, Extended Translation: Enabled
scsi0:   Synchronous Negotiation: Ultra, Wide Negotiation: Enabled
scsi0:   Disconnect/Reconnect: Enabled, Tagged Queuing: Enabled
scsi0:   Scatter/Gather Limit: 128 of 8192 segments, Mailboxes: 211
scsi0:   Driver Queue Depth: 211, Host Adapter Queue Depth: 192
scsi0:   Tagged Queue Depth: Automatic, Untagged Queue Depth: 3
scsi0:   Error Recovery Strategy: Default, SCSI Bus Reset: Enabled
scsi0: *** BusLogic BT-958 Initialized Successfully ***
scsi0 : BusLogic BT-958

-- 
function.linuxpower.ca