2.4.19rc2 and Promise RAID controller

[Klaus Dittrich]

With 2.4.19.rc2 my Promise RAID controller will be skipped.
With 2.4.19.rc1 and before it was detected and worked fine.

from dmesg of 2.4.19rc2 ..

PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hda:pio, hdb:DMA
	ide1: BM-DMA at 0xd808-0xd80f, BIOS settings: hdc:pio, hdd:pio
	PDC20270: IDE controller on PCI bus 00 dev 48
	PDC20270: chipset revision 2
	ide: Skipping Promise RAID controller.
	hdb: C/H/S=20510/81/228 from BIOS ignored
	hdb: IBM-DTLA-307060, ATA DISK drive
	ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
	hdb: 120103200 sectors (61493 MB) w/1916KiB Cache, CHS=119150/16/63, UDMA(33)
	Partition check:
		 hdb: hdb1
Floppy drive(s): fd0 is 1.44M

from dmesg of 2.4.19rc1 ..

PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hda:pio, hdb:DMA
	ide1: BM-DMA at 0xd808-0xd80f, BIOS settings: hdc:pio, hdd:pio
	PDC20270: IDE controller on PCI bus 00 dev 48
	PDC20270: chipset revision 2
	PDC20270: not 100% native mode: will probe irqs later
	ide2: BM-DMA at 0xa400-0xa407, BIOS settings: hde:pio, hdf:pio
	ide3: BM-DMA at 0xa408-0xa40f, BIOS settings: hdg:pio, hdh:pio
	hdb: C/H/S=20510/81/228 from BIOS ignored
	hdb: IBM-DTLA-307060, ATA DISK drive
	hde: WDC WD600BB-32CXA0, ATA DISK drive
	hdg: WDC WD600BB-32CXA0, ATA DISK drive
	ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
	ide2 at 0xb800-0xb807,0xb402 on irq 5
	ide3 at 0xb000-0xb007,0xa802 on irq 5
	hdb: 120103200 sectors (61493 MB) w/1916KiB Cache, CHS=119150/16/63, UDMA(33)
	hde: 117231408 sectors (60022 MB) w/2048KiB Cache, CHS=116301/16/63, (U)DMA
	hdg: 117231408 sectors (60022 MB) w/2048KiB Cache, CHS=116301/16/63, (U)DMA
	Partition check:
		hdb: hdb1
		hde: hde1
		hdg: hdg1
Floppy drive(s): fd0 is 1.44M

-- 
Regards

Klaus