Here's a patch against 2.4.19-rc1-ac6 that updates the IBM PCI Hotplug
driver to the latest version. It fixes a number of bugs that have been
found on the current hardware, and removes some stupid locking problems
that essentially prevented the driver from working on machines with a
large number of pci slots.
thanks,
greg k-h
diff -Naur -X /home/greg/linux/dontdiff linux-2.4.19-rc1-ac6/drivers/hotplug/ibmphp.h linux-2.4.19-rc1-ac6-greg/drivers/hotplug/ibmphp.h
--- linux-2.4.19-rc1-ac6/drivers/hotplug/ibmphp.h Tue Jul 16 10:39:36 2002
+++ linux-2.4.19-rc1-ac6-greg/drivers/hotplug/ibmphp.h Tue Jul 16 10:47:26 2002
@@ -168,13 +168,11 @@
struct ebda_hpc_bus {
u32 bus_num;
-/*
u8 slots_at_33_conv;
u8 slots_at_66_conv;
u8 slots_at_66_pcix;
u8 slots_at_100_pcix;
u8 slots_at_133_pcix;
-*/
};
@@ -232,12 +230,15 @@
u8 slot_max;
u8 slot_count;
u8 busno;
- u8 current_speed;
- u8 supported_speed;
u8 controller_id;
- u8 supported_bus_mode;
+ u8 current_speed;
u8 current_bus_mode;
u8 index;
+ u8 slots_at_33_conv;
+ u8 slots_at_66_conv;
+ u8 slots_at_66_pcix;
+ u8 slots_at_100_pcix;
+ u8 slots_at_133_pcix;
struct list_head bus_info_list;
};
@@ -690,8 +691,11 @@
u8 bus;
u8 device;
u8 number;
+ u8 real_physical_slot_num;
char name[100];
u32 capabilities;
+ u8 supported_speed;
+ u8 supported_bus_mode;
struct hotplug_slot *hotplug_slot;
struct controller *ctrl;
struct pci_func *func;
@@ -709,10 +713,12 @@
struct controller {
struct ebda_hpc_slot *slots;
struct ebda_hpc_bus *buses;
+ u8 starting_slot_num; /* starting and ending slot #'s this ctrl controls*/
+ u8 ending_slot_num;
u8 revision;
u8 options; /* which options HPC supports */
u8 status;
- u8 ctlr_id; /* TONI */
+ u8 ctlr_id;
u8 slot_count;
u8 bus_count;
u8 ctlr_relative_id;
diff -Naur -X /home/greg/linux/dontdiff linux-2.4.19-rc1-ac6/drivers/hotplug/ibmphp_core.c linux-2.4.19-rc1-ac6-greg/drivers/hotplug/ibmphp_core.c
--- linux-2.4.19-rc1-ac6/drivers/hotplug/ibmphp_core.c Tue Jul 16 10:39:36 2002
+++ linux-2.4.19-rc1-ac6-greg/drivers/hotplug/ibmphp_core.c Tue Jul 16 10:45:28 2002
@@ -44,7 +44,7 @@
#define get_ctrl_revision(sl, rev) ibmphp_hpc_readslot (sl, READ_REVLEVEL, rev)
#define get_hpc_options(sl, opt) ibmphp_hpc_readslot (sl, READ_HPCOPTIONS, opt)
-#define DRIVER_VERSION "0.1"
+#define DRIVER_VERSION "0.3"
#define DRIVER_DESC "IBM Hot Plug PCI Controller Driver"
int ibmphp_debug;
@@ -393,8 +393,8 @@
pslot = (struct slot *) hotplug_slot->private;
if (pslot) {
rc = 0;
- mode = pslot->bus_on->supported_bus_mode;
- *value = pslot->bus_on->supported_speed;
+ mode = pslot->supported_bus_mode;
+ *value = pslot->supported_speed;
*value &= 0x0f;
if (mode == BUS_MODE_PCIX)
@@ -1009,6 +1009,7 @@
}
return rc;
}
+
/*******************************************************
* Returns whether the bus is empty or not
*******************************************************/
@@ -1036,7 +1037,9 @@
/***********************************************************
* If the HPC permits and the bus currently empty, tries to set the
- * bus speed and mode at the maximum card capability
+ * bus speed and mode at the maximum card and bus capability
+ * Parameters: slot
+ * Returns: bus is set (0) or error code
***********************************************************/
static int set_bus (struct slot * slot_cur)
{
@@ -1056,30 +1059,102 @@
cmd = HPC_BUS_33CONVMODE;
break;
case HPC_SLOT_SPEED_66:
- if (SLOT_PCIX (slot_cur->ext_status))
- cmd = HPC_BUS_66PCIXMODE;
- else
- cmd = HPC_BUS_66CONVMODE;
+ if (SLOT_PCIX (slot_cur->ext_status)) {
+ if ((slot_cur->supported_speed >= BUS_SPEED_66) && (slot_cur->supported_bus_mode == BUS_MODE_PCIX))
+ cmd = HPC_BUS_66PCIXMODE;
+ else if (!SLOT_BUS_MODE (slot_cur->ext_status))
+ /* if max slot/bus capability is 66 pci
+ and there's no bus mode mismatch, then
+ the adapter supports 66 pci */
+ cmd = HPC_BUS_66CONVMODE;
+ else
+ cmd = HPC_BUS_33CONVMODE;
+ } else {
+ if (slot_cur->supported_speed >= BUS_SPEED_66)
+ cmd = HPC_BUS_66CONVMODE;
+ else
+ cmd = HPC_BUS_33CONVMODE;
+ }
break;
case HPC_SLOT_SPEED_133:
- if (slot_cur->bus_on->slot_count > 1)
+ switch (slot_cur->supported_speed) {
+ case BUS_SPEED_33:
+ cmd = HPC_BUS_33CONVMODE;
+ break;
+ case BUS_SPEED_66:
+ if (slot_cur->supported_bus_mode == BUS_MODE_PCIX)
+ cmd = HPC_BUS_66PCIXMODE;
+ else
+ cmd = HPC_BUS_66CONVMODE;
+ break;
+ case BUS_SPEED_100:
cmd = HPC_BUS_100PCIXMODE;
- else
+ break;
+ case BUS_SPEED_133:
cmd = HPC_BUS_133PCIXMODE;
+ break;
+ default:
+ err ("Wrong bus speed \n");
+ return -ENODEV;
+ }
break;
default:
err ("wrong slot speed \n");
return -ENODEV;
}
debug ("setting bus speed for slot %d, cmd %x\n", slot_cur->number, cmd);
- rc = ibmphp_hpc_writeslot (slot_cur, cmd);
- if (rc)
- return rc;
+ ibmphp_hpc_writeslot (slot_cur, cmd);
}
+ /* This is for x400, once Brandon fixes the firmware,
+ will not need this delay */
+ long_delay (1 * HZ);
debug ("%s -Exit \n", __FUNCTION__);
return 0;
}
+/* This routine checks the bus limitations that the slot is on from the BIOS.
+ * This is used in deciding whether or not to power up the slot.
+ * (electrical/spec limitations. For example, >1 133 MHz or >2 66 PCI cards on
+ * same bus)
+ * Parameters: slot
+ * Returns: 0 = no limitations, -EINVAL = exceeded limitations on the bus
+ */
+static int check_limitations (struct slot *slot_cur)
+{
+ u8 i;
+ struct slot * tmp_slot;
+ u8 count = 0;
+ u8 limitation = 0;
+
+ for (i = slot_cur->bus_on->slot_min; i <= slot_cur->bus_on->slot_max; i++) {
+ tmp_slot = ibmphp_get_slot_from_physical_num (i);
+ if ((SLOT_POWER (tmp_slot->status)) && !(SLOT_CONNECT (tmp_slot->status)))
+ count++;
+ }
+ get_cur_bus_info (&slot_cur);
+ switch (slot_cur->bus_on->current_speed) {
+ case BUS_SPEED_33:
+ limitation = slot_cur->bus_on->slots_at_33_conv;
+ break;
+ case BUS_SPEED_66:
+ if (slot_cur->bus_on->current_bus_mode == BUS_MODE_PCIX)
+ limitation = slot_cur->bus_on->slots_at_66_pcix;
+ else
+ limitation = slot_cur->bus_on->slots_at_66_conv;
+ break;
+ case BUS_SPEED_100:
+ limitation = slot_cur->bus_on->slots_at_100_pcix;
+ break;
+ case BUS_SPEED_133:
+ limitation = slot_cur->bus_on->slots_at_133_pcix;
+ break;
+ }
+
+ if ((count + 1) > limitation)
+ return -EINVAL;
+ return 0;
+}
+
static inline void print_card_capability (struct slot *slot_cur)
{
info ("capability of the card is ");
@@ -1136,7 +1211,28 @@
ibmphp_unlock_operations ();
return -ENODEV;
}
-
+
+ /*-----------------debugging------------------------------*/
+ get_cur_bus_info (&slot_cur);
+ debug ("the current bus speed right after set_bus = %x \n", slot_cur->bus_on->current_speed);
+ /*----------------------------------------------------------*/
+
+ rc = check_limitations (slot_cur);
+ if (rc) {
+ err ("Adding this card exceeds the limitations of this bus. \n");
+ err ("(i.e., >1 133MHz cards running on same bus, or >2 66 PCI cards running on same bus \n. Try hot-adding into another bus \n");
+ attn_off (slot_cur);
+ attn_on (slot_cur);
+
+ if (slot_update (&slot_cur)) {
+ ibmphp_unlock_operations ();
+ return -ENODEV;
+ }
+ ibmphp_update_slot_info (slot_cur);
+ ibmphp_unlock_operations ();
+ return -EINVAL;
+ }
+
rc = power_on (slot_cur);
if (rc) {
@@ -1151,19 +1247,24 @@
return -ENODEV;
}
/* Check to see the error of why it failed */
- if (!(SLOT_PWRGD (slot_cur->status)))
+ if ((SLOT_POWER (slot_cur->status)) && !(SLOT_PWRGD (slot_cur->status)))
err ("power fault occured trying to power up \n");
else if (SLOT_BUS_SPEED (slot_cur->status)) {
err ("bus speed mismatch occured. please check current bus speed and card capability \n");
print_card_capability (slot_cur);
- } else if (SLOT_BUS_MODE (slot_cur->ext_status))
+ } else if (SLOT_BUS_MODE (slot_cur->ext_status)) {
err ("bus mode mismatch occured. please check current bus mode and card capability \n");
-
+ print_card_capability (slot_cur);
+ }
ibmphp_update_slot_info (slot_cur);
- ibmphp_unlock_operations ();
+ ibmphp_unlock_operations ();
return rc;
}
debug ("after power_on\n");
+ /*-----------------------debugging---------------------------*/
+ get_cur_bus_info (&slot_cur);
+ debug ("the current bus speed right after power_on = %x \n", slot_cur->bus_on->current_speed);
+ /*----------------------------------------------------------*/
rc = slot_update (&slot_cur);
if (rc) {
@@ -1180,7 +1281,7 @@
if (SLOT_POWER (slot_cur->status) && !(SLOT_PWRGD (slot_cur->status))) {
faulted = 1;
- err ("power fault occured trying to power up...\n");
+ err ("power fault occured trying to power up... \n");
} else if (SLOT_POWER (slot_cur->status) && (SLOT_BUS_SPEED (slot_cur->status))) {
faulted = 1;
err ("bus speed mismatch occured. please check current bus speed and card capability \n");
@@ -1200,8 +1301,8 @@
return rcpr;
}
- if (slot_update (&slot_cur)) {
- ibmphp_unlock_operations ();
+ if (slot_update (&slot_cur)) {
+ ibmphp_unlock_operations ();
return -ENODEV;
}
ibmphp_update_slot_info (slot_cur);
@@ -1278,20 +1379,24 @@
{
int rc;
struct slot *slot_cur = (struct slot *) hotplug_slot->private;
- u8 flag = slot_cur->flag;
+ u8 flag;
+ int parm = 0;
- slot_cur->flag = TRUE;
debug ("DISABLING SLOT... \n");
- ibmphp_lock_operations ();
- if (slot_cur == NULL) {
- ibmphp_unlock_operations ();
+ if (slot_cur == NULL)
return -ENODEV;
- }
- if (slot_cur->ctrl == NULL) {
- ibmphp_unlock_operations ();
+
+ if (slot_cur->ctrl == NULL)
return -ENODEV;
- }
+
+ flag = slot_cur->flag; /* to see if got here from polling */
+
+ if (flag)
+ ibmphp_lock_operations ();
+
+ slot_cur->flag = TRUE;
+
if (flag == TRUE) {
rc = validate (slot_cur, DISABLE); /* checking if powered off already & valid slot # */
if (rc) {
@@ -1333,10 +1438,21 @@
ibmphp_unlock_operations ();
return rc;
}
+
+ /* If we got here from latch suddenly opening on operating card or
+ a power fault, there's no power to the card, so cannot
+ read from it to determine what resources it occupied. This operation
+ is forbidden anyhow. The best we can do is remove it from kernel
+ lists at least */
+
+ if (!flag) {
+ attn_off (slot_cur);
+ return 0;
+ }
- rc = ibmphp_unconfigure_card (&slot_cur, 0);
+ rc = ibmphp_unconfigure_card (&slot_cur, parm);
slot_cur->func = NULL;
- debug ("in disable_slot. after unconfigure_card \n");
+ debug ("in disable_slot. after unconfigure_card\n");
if (rc) {
err ("could not unconfigure card.\n");
attn_off (slot_cur); /* need to turn off if was blinking b4 */
@@ -1347,9 +1463,7 @@
return -EFAULT;
}
- if (flag)
- ibmphp_update_slot_info (slot_cur);
-
+ ibmphp_update_slot_info (slot_cur);
ibmphp_unlock_operations ();
return -EFAULT;
}
@@ -1363,9 +1477,7 @@
return -EFAULT;
}
- if (flag)
- ibmphp_update_slot_info (slot_cur);
-
+ ibmphp_update_slot_info (slot_cur);
ibmphp_unlock_operations ();
return rc;
}
@@ -1375,11 +1487,7 @@
ibmphp_unlock_operations ();
return -EFAULT;
}
- if (flag)
- rc = ibmphp_update_slot_info (slot_cur);
- else
- rc = 0;
-
+ rc = ibmphp_update_slot_info (slot_cur);
ibmphp_print_test ();
ibmphp_unlock_operations();
return rc;
@@ -1422,9 +1530,12 @@
int rc = 0;
init_flag = 1;
+
+ info (DRIVER_DESC " version: " DRIVER_VERSION "\n");
+
ibmphp_pci_root_ops = get_root_pci_ops ();
if (ibmphp_pci_root_ops == NULL) {
- err ("cannot read bus operations... will not be able to read the cards. Please check your system \n");
+ err ("cannot read bus operations... will not be able to read the cards. Please check your system\n");
return -ENODEV;
}
@@ -1439,13 +1550,13 @@
ibmphp_unload ();
return rc;
}
- debug ("after ibmphp_access_ebda () \n");
+ debug ("after ibmphp_access_ebda ()\n");
if ((rc = ibmphp_rsrc_init ())) {
ibmphp_unload ();
return rc;
}
- debug ("AFTER Resource & EBDA INITIALIZATIONS \n");
+ debug ("AFTER Resource & EBDA INITIALIZATIONS\n");
max_slots = get_max_slots ();
@@ -1463,7 +1574,6 @@
* so that no one can unload us. */
MOD_DEC_USE_COUNT;
- info (DRIVER_DESC " version: " DRIVER_VERSION "\n");
return 0;
}
@@ -1471,9 +1581,9 @@
static void __exit ibmphp_exit (void)
{
ibmphp_hpc_stop_poll_thread ();
- debug ("after polling \n");
+ debug ("after polling\n");
ibmphp_unload ();
- debug ("done \n");
+ debug ("done\n");
}
module_init (ibmphp_init);
diff -Naur -X /home/greg/linux/dontdiff linux-2.4.19-rc1-ac6/drivers/hotplug/ibmphp_ebda.c linux-2.4.19-rc1-ac6-greg/drivers/hotplug/ibmphp_ebda.c
--- linux-2.4.19-rc1-ac6/drivers/hotplug/ibmphp_ebda.c Tue Jul 16 10:39:36 2002
+++ linux-2.4.19-rc1-ac6-greg/drivers/hotplug/ibmphp_ebda.c Tue Jul 16 10:45:28 2002
@@ -161,9 +161,14 @@
debug ("%s - slot_count = %x\n", __FUNCTION__, ptr->slot_count);
debug ("%s - bus# = %x\n", __FUNCTION__, ptr->busno);
debug ("%s - current_speed = %x\n", __FUNCTION__, ptr->current_speed);
- debug ("%s - supported_speed = %x\n", __FUNCTION__, ptr->supported_speed);
debug ("%s - controller_id = %x\n", __FUNCTION__, ptr->controller_id);
- debug ("%s - bus_mode = %x\n", __FUNCTION__, ptr->supported_bus_mode);
+
+ debug ("%s - slots_at_33_conv = %x\n", __FUNCTION__, ptr->slots_at_33_conv);
+ debug ("%s - slots_at_66_conv = %x\n", __FUNCTION__, ptr->slots_at_66_conv);
+ debug ("%s - slots_at_66_pcix = %x\n", __FUNCTION__, ptr->slots_at_66_pcix);
+ debug ("%s - slots_at_100_pcix = %x\n", __FUNCTION__, ptr->slots_at_100_pcix);
+ debug ("%s - slots_at_133_pcix = %x\n", __FUNCTION__, ptr->slots_at_133_pcix);
+
}
}
@@ -455,19 +460,9 @@
bus_info_ptr1->index = bus_index++;
bus_info_ptr1->current_speed = 0xff;
bus_info_ptr1->current_bus_mode = 0xff;
- if ( ((slot_ptr->slot_cap) & EBDA_SLOT_133_MAX) == EBDA_SLOT_133_MAX )
- bus_info_ptr1->supported_speed = 3;
- else if ( ((slot_ptr->slot_cap) & EBDA_SLOT_100_MAX) == EBDA_SLOT_100_MAX )
- bus_info_ptr1->supported_speed = 2;
- else if ( ((slot_ptr->slot_cap) & EBDA_SLOT_66_MAX) == EBDA_SLOT_66_MAX )
- bus_info_ptr1->supported_speed = 1;
+
bus_info_ptr1->controller_id = hpc_ptr->ctlr_id;
- if ( ((slot_ptr->slot_cap) & EBDA_SLOT_PCIX_CAP) == EBDA_SLOT_PCIX_CAP )
- bus_info_ptr1->supported_bus_mode = 1;
- else
- bus_info_ptr1->supported_bus_mode =0;
-
-
+
list_add_tail (&bus_info_ptr1->bus_info_list, &bus_info_head);
} else {
@@ -486,9 +481,25 @@
/* init bus structure */
bus_ptr = hpc_ptr->buses;
for (bus = 0; bus < bus_num; bus++) {
- bus_ptr->bus_num = readb (io_mem + addr_bus);
+ bus_ptr->bus_num = readb (io_mem + addr_bus + bus);
+ bus_ptr->slots_at_33_conv = readb (io_mem + addr_bus + bus_num + 8 * bus);
+ bus_ptr->slots_at_66_conv = readb (io_mem + addr_bus + bus_num + 8 * bus + 1);
+
+ bus_ptr->slots_at_66_pcix = readb (io_mem + addr_bus + bus_num + 8 * bus + 2);
+
+ bus_ptr->slots_at_100_pcix = readb (io_mem + addr_bus + bus_num + 8 * bus + 3);
+
+ bus_ptr->slots_at_133_pcix = readb (io_mem + addr_bus + bus_num + 8 * bus + 4);
+
+ bus_info_ptr2 = ibmphp_find_same_bus_num (bus_ptr->bus_num);
+ if (bus_info_ptr2) {
+ bus_info_ptr2->slots_at_33_conv = bus_ptr->slots_at_33_conv;
+ bus_info_ptr2->slots_at_66_conv = bus_ptr->slots_at_66_conv;
+ bus_info_ptr2->slots_at_66_pcix = bus_ptr->slots_at_66_pcix;
+ bus_info_ptr2->slots_at_100_pcix = bus_ptr->slots_at_100_pcix;
+ bus_info_ptr2->slots_at_133_pcix = bus_ptr->slots_at_133_pcix;
+ }
bus_ptr++;
- addr_bus += 1;
}
hpc_ptr->ctlr_type = temp;
@@ -511,10 +522,6 @@
case 2:
hpc_ptr->u.wpeg_ctlr.wpegbbar = readl (io_mem + addr);
hpc_ptr->u.wpeg_ctlr.i2c_addr = readb (io_mem + addr + 4);
- /* following 2 lines for testing purpose */
- if (hpc_ptr->u.wpeg_ctlr.i2c_addr == 0)
- hpc_ptr->ctlr_type = 4;
-
hpc_ptr->irq = readb (io_mem + addr + 5);
addr += 6;
@@ -537,6 +544,8 @@
hpc_ptr->revision = 0xff;
hpc_ptr->options = 0xff;
+ hpc_ptr->starting_slot_num = hpc_ptr->slots[0].slot_num;
+ hpc_ptr->ending_slot_num = hpc_ptr->slots[slot_num-1].slot_num;
// register slots with hpc core as well as create linked list of ibm slot
for (index = 0; index < hpc_ptr->slot_count; index++) {
@@ -573,10 +582,24 @@
return -ENOMEM;
}
+
((struct slot *)hp_slot_ptr->private)->flag = TRUE;
snprintf (hp_slot_ptr->name, 10, "%d", hpc_ptr->slots[index].slot_num);
((struct slot *) hp_slot_ptr->private)->capabilities = hpc_ptr->slots[index].slot_cap;
+ if ((hpc_ptr->slots[index].slot_cap & EBDA_SLOT_133_MAX) == EBDA_SLOT_133_MAX)
+ ((struct slot *) hp_slot_ptr->private)->supported_speed = 3;
+ else if ((hpc_ptr->slots[index].slot_cap & EBDA_SLOT_100_MAX) == EBDA_SLOT_100_MAX)
+ ((struct slot *) hp_slot_ptr->private)->supported_speed = 2;
+ else if ((hpc_ptr->slots[index].slot_cap & EBDA_SLOT_66_MAX) == EBDA_SLOT_66_MAX)
+ ((struct slot *) hp_slot_ptr->private)->supported_speed = 1;
+
+ if ((hpc_ptr->slots[index].slot_cap & EBDA_SLOT_PCIX_CAP) == EBDA_SLOT_PCIX_CAP)
+ ((struct slot *) hp_slot_ptr->private)->supported_bus_mode = 1;
+ else
+ ((struct slot *) hp_slot_ptr->private)->supported_bus_mode = 0;
+
+
((struct slot *) hp_slot_ptr->private)->bus = hpc_ptr->slots[index].slot_bus_num;
bus_info_ptr1 = ibmphp_find_same_bus_num (hpc_ptr->slots[index].slot_bus_num);
@@ -591,7 +614,7 @@
((struct slot *) hp_slot_ptr->private)->ctlr_index = hpc_ptr->slots[index].ctl_index;
((struct slot *) hp_slot_ptr->private)->number = hpc_ptr->slots[index].slot_num;
-
+
((struct slot *) hp_slot_ptr->private)->hotplug_slot = hp_slot_ptr;
rc = ibmphp_hpc_fillhpslotinfo (hp_slot_ptr);
diff -Naur -X /home/greg/linux/dontdiff linux-2.4.19-rc1-ac6/drivers/hotplug/ibmphp_hpc.c linux-2.4.19-rc1-ac6-greg/drivers/hotplug/ibmphp_hpc.c
--- linux-2.4.19-rc1-ac6/drivers/hotplug/ibmphp_hpc.c Tue Jul 16 10:39:36 2002
+++ linux-2.4.19-rc1-ac6-greg/drivers/hotplug/ibmphp_hpc.c Tue Jul 16 10:45:28 2002
@@ -3,7 +3,7 @@
*
* Written By: Jyoti Shah, IBM Corporation
*
- * Copyright (c) 2001,2001 IBM Corp.
+ * Copyright (c) 2001-2002 IBM Corp.
*
* All rights reserved.
*
@@ -27,7 +27,6 @@
*
*/
-//#include <linux/delay.h>
#include <linux/wait.h>
#include <linux/time.h>
#include <linux/module.h>
@@ -35,9 +34,6 @@
#include <linux/smp_lock.h>
#include "ibmphp.h"
-#define POLL_NO 0x01
-#define POLL_YES 0x00
-
static int to_debug = FALSE;
#define debug_polling(fmt, arg...) do { if (to_debug) debug (fmt, arg); } while (0)
@@ -83,10 +79,6 @@
//
//----------------------------------------------------------------------------
#define WPG_I2C_IOREMAP_SIZE 0x2044 // size of linear address interval
-#define WPG_CTLR_MAX 0x01 // max controllers
-#define WPG_SLOT_MAX 0x06 // max slots
-#define WPG_CTLR_SLOT_MAX 0x06 // max slots per controller
-#define WPG_FIRST_CTLR 0x00 // index of the controller
//----------------------------------------------------------------------------
// command index
@@ -102,19 +94,15 @@
// if bits 20,22,25,26,27,29,30 are OFF return TRUE
#define HPC_I2CSTATUS_CHECK(s) ((u8)((s & 0x00000A76) ? FALSE : TRUE))
-// return code 0:poll slots, 1-POLL_LATCH_CNT:poll latch register
-#define INCREMENT_POLLCNT(i) ((i < POLL_LATCH_CNT) ? i++ : (i=0))
//----------------------------------------------------------------------------
// global variables
//----------------------------------------------------------------------------
static int ibmphp_shutdown;
static int tid_poll;
-static int stop_polling; // 2 values: poll, don't poll
static struct semaphore sem_hpcaccess; // lock access to HPC
static struct semaphore semOperations; // lock all operations and
// access to data structures
static struct semaphore sem_exit; // make sure polling thread goes away
-static struct semaphore sem_poll; // make sure poll is idle
//----------------------------------------------------------------------------
// local function prototypes
//----------------------------------------------------------------------------
@@ -127,7 +115,7 @@
static void poll_hpc (void);
static int update_slot (struct slot *, u8);
static int process_changeinstatus (struct slot *, struct slot *);
-static int process_changeinlatch (u8, u8);
+static int process_changeinlatch (u8, u8, struct controller *);
static int hpc_poll_thread (void *);
static int hpc_wait_ctlr_notworking (int, struct controller *, void *, u8 *);
//----------------------------------------------------------------------------
@@ -145,8 +133,6 @@
init_MUTEX (&sem_hpcaccess);
init_MUTEX (&semOperations);
init_MUTEX_LOCKED (&sem_exit);
- init_MUTEX_LOCKED (&sem_poll);
- stop_polling = POLL_YES;
to_debug = FALSE;
ibmphp_shutdown = FALSE;
tid_poll = 0;
@@ -277,8 +263,7 @@
int i;
- debug_polling ("%s - Entry WPGBbar[%lx] index[%x] cmd[%x]\n",
- __FUNCTION__, (ulong) WPGBbar, index, cmd);
+ debug_polling ("%s - Entry WPGBbar[%lx] index[%x] cmd[%x]\n", __FUNCTION__, (ulong) WPGBbar, index, cmd);
rc = 0;
//--------------------------------------------------------------------
@@ -470,8 +455,7 @@
int rc = 0;
int busindex;
- debug_polling ("%s - Entry pslot[%lx] cmd[%x] pstatus[%lx]\n",
- __FUNCTION__, (ulong) pslot, cmd, (ulong) pstatus);
+ debug_polling ("%s - Entry pslot[%lx] cmd[%x] pstatus[%lx]\n", __FUNCTION__, (ulong) pslot, cmd, (ulong) pstatus);
if ((pslot == NULL)
|| ((pstatus == NULL) && (cmd != READ_ALLSTAT) && (cmd != READ_BUSSTATUS))) {
@@ -716,11 +700,6 @@
void ibmphp_lock_operations (void)
{
down (&semOperations);
- stop_polling = POLL_NO;
- to_debug = TRUE;
-
- /* waiting for polling to actually stop */
- down (&sem_poll);
}
/*----------------------------------------------------------------------
@@ -729,8 +708,6 @@
void ibmphp_unlock_operations (void)
{
debug ("%s - Entry\n", __FUNCTION__);
- stop_polling = POLL_YES;
- to_debug = FALSE;
up (&semOperations);
debug ("%s - Exit\n", __FUNCTION__);
}
@@ -738,34 +715,30 @@
/*----------------------------------------------------------------------
* Name: poll_hpc()
*---------------------------------------------------------------------*/
+#define POLL_LATCH_REGISTER 0
+#define POLL_SLOTS 1
+#define POLL_SLEEP 2
static void poll_hpc (void)
{
- struct slot myslot, *pslot = NULL;
+ struct slot myslot;
+ struct slot *pslot = NULL;
struct list_head *pslotlist;
int rc;
+ int poll_state = POLL_LATCH_REGISTER;
u8 oldlatchlow = 0x00;
u8 curlatchlow = 0x00;
- int pollcnt = 0;
+ int poll_count = 0;
u8 ctrl_count = 0x00;
- debug ("poll_hpc - Entry\n");
+ debug ("%s - Entry\n", __FUNCTION__);
while (!ibmphp_shutdown) {
- if (stop_polling) {
- debug ("poll_hpc - stop_polling\n");
- up (&sem_poll);
- /* to prevent deadlock */
- if (ibmphp_shutdown)
- break;
- /* to make the thread sleep */
- down (&semOperations);
- up (&semOperations);
- debug ("poll_hpc - after stop_polling sleep\n");
- } else {
- if (pollcnt) {
- // only poll the latch register
- oldlatchlow = curlatchlow;
+ /* try to get the lock to do some kind of harware access */
+ down (&semOperations);
+ switch (poll_state) {
+ case POLL_LATCH_REGISTER:
+ oldlatchlow = curlatchlow;
ctrl_count = 0x00;
list_for_each (pslotlist, &ibmphp_slot_head) {
if (ctrl_count >= ibmphp_get_total_controllers())
@@ -779,14 +752,16 @@
&curlatchlow);
if (oldlatchlow != curlatchlow)
process_changeinlatch (oldlatchlow,
- curlatchlow);
+ curlatchlow,
+ pslot->ctrl);
}
}
}
- } else {
+ poll_state = POLL_SLOTS;
+ break;
+
+ case POLL_SLOTS:
list_for_each (pslotlist, &ibmphp_slot_head) {
- if (stop_polling)
- break;
pslot = list_entry (pslotlist, struct slot, ibm_slot_list);
// make a copy of the old status
memcpy ((void *) &myslot, (void *) pslot,
@@ -797,31 +772,45 @@
process_changeinstatus (pslot, &myslot);
}
- if (!stop_polling) {
- ctrl_count = 0x00;
- list_for_each (pslotlist, &ibmphp_slot_head) {
- if (ctrl_count >= ibmphp_get_total_controllers())
- break;
- pslot =
- list_entry (pslotlist, struct slot,
- ibm_slot_list);
- if (pslot->ctrl->ctlr_relative_id == ctrl_count) {
- ctrl_count++;
- if (READ_SLOT_LATCH (pslot->ctrl))
- rc = ibmphp_hpc_readslot (pslot,
- READ_SLOTLATCHLOWREG,
- &curlatchlow);
- }
+ ctrl_count = 0x00;
+ list_for_each (pslotlist, &ibmphp_slot_head) {
+ if (ctrl_count >= ibmphp_get_total_controllers())
+ break;
+ pslot = list_entry (pslotlist, struct slot, ibm_slot_list);
+ if (pslot->ctrl->ctlr_relative_id == ctrl_count) {
+ ctrl_count++;
+ if (READ_SLOT_LATCH (pslot->ctrl))
+ rc = ibmphp_hpc_readslot (pslot,
+ READ_SLOTLATCHLOWREG,
+ &curlatchlow);
}
}
- }
- INCREMENT_POLLCNT (pollcnt);
- long_delay (POLL_INTERVAL_SEC * HZ); // snooze
+ ++poll_count;
+ if (poll_count >= POLL_LATCH_CNT) {
+ poll_count = 0;
+ poll_state = POLL_SLEEP;
+ }
+ break;
+
+ case POLL_SLEEP:
+ /* don't sleep with a lock on the hardware */
+ up (&semOperations);
+ long_delay (POLL_INTERVAL_SEC * HZ);
+ down (&semOperations);
+ poll_state = POLL_LATCH_REGISTER;
+ break;
}
+
+ /* give up the harware semaphore */
+ up (&semOperations);
+
+ /* sleep for a short time just for good measure */
+ set_current_state (TASK_INTERRUPTIBLE);
+ schedule_timeout (HZ/10);
}
- up (&sem_poll);
+
up (&sem_exit);
- debug ("poll_hpc - Exit\n");
+ debug ("%s - Exit\n", __FUNCTION__);
}
@@ -917,7 +906,6 @@
// bit 0 - HPC_SLOT_POWER
if ((pslot->status & 0x01) != (poldslot->status & 0x01))
- /* ????????? DO WE NEED TO UPDATE BUS SPEED INFO HERE ??? */
update = TRUE;
// bit 1 - HPC_SLOT_CONNECT
@@ -936,7 +924,7 @@
// bit 5 - HPC_SLOT_PWRGD
if ((pslot->status & 0x20) != (poldslot->status & 0x20))
// OFF -> ON: ignore, ON -> OFF: disable slot
- if (poldslot->status & 0x20)
+ if ((poldslot->status & 0x20) && (SLOT_CONNECT (poldslot->status) == HPC_SLOT_CONNECTED) && (SLOT_PRESENT (poldslot->status)))
disable = TRUE;
// bit 6 - HPC_SLOT_BUS_SPEED
@@ -947,20 +935,20 @@
update = TRUE;
// OPEN -> CLOSE
if (pslot->status & 0x80) {
- if (SLOT_POWER (pslot->status)) {
+ if (SLOT_PWRGD (pslot->status)) {
// power goes on and off after closing latch
// check again to make sure power is still ON
long_delay (1 * HZ);
rc = ibmphp_hpc_readslot (pslot, READ_SLOTSTATUS, &status);
- if (SLOT_POWER (status))
+ if (SLOT_PWRGD (status))
update = TRUE;
else // overwrite power in pslot to OFF
pslot->status &= ~HPC_SLOT_POWER;
}
}
// CLOSE -> OPEN
- else if ((SLOT_POWER (poldslot->status) == HPC_SLOT_POWER_ON)
- || (SLOT_CONNECT (poldslot->status) == HPC_SLOT_CONNECTED)) {
+ else if ((SLOT_PWRGD (poldslot->status) == HPC_SLOT_PWRGD_GOOD)
+ && (SLOT_CONNECT (poldslot->status) == HPC_SLOT_CONNECTED) && (SLOT_PRESENT (poldslot->status))) {
disable = TRUE;
}
// else - ignore
@@ -994,7 +982,7 @@
* Return 0 or error codes
* Value:
*---------------------------------------------------------------------*/
-static int process_changeinlatch (u8 old, u8 new)
+static int process_changeinlatch (u8 old, u8 new, struct controller *ctrl)
{
struct slot myslot, *pslot;
u8 i;
@@ -1004,7 +992,7 @@
debug ("%s - Entry old[%x], new[%x]\n", __FUNCTION__, old, new);
// bit 0 reserved, 0 is LSB, check bit 1-6 for 6 slots
- for (i = 1; i <= 6; i++) {
+ for (i = ctrl->starting_slot_num; i <= ctrl->ending_slot_num; i++) {
mask = 0x01 << i;
if ((mask & old) != (mask & new)) {
pslot = ibmphp_get_slot_from_physical_num (i);
@@ -1090,7 +1078,6 @@
// cleanup
free_hpc_access ();
ibmphp_unlock_operations ();
- up (&sem_poll);
up (&sem_exit);
debug ("ibmphp_hpc_stop_poll_thread - Exit\n");
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/