Re: IDE/ATAPI in 2.5

On Sun, 14 Jul 2002, Rik van Riel wrote:

> Date: Sun, 14 Jul 2002 17:18:35 -0300 (BRT)
> From: Rik van Riel <[e-mail]>
> To: Joerg Schilling <[e-mail]>
> Cc: [e-mail], [e-mail],
>      [e-mail]
> Subject: Re: IDE/ATAPI in 2.5
>
> On Sun, 14 Jul 2002, Joerg Schilling wrote:
>
> > BTW: did you ever look at Solaris / HP-UX, ... and the way they
> > name disks?
> >
> > someting like: /dev/{r}dsk/c0t0d0s0
> > This is SCSI bus, target, lun and slice.
>
> I wonder what they'll change it to in order to support
> network attached storage.
>
Actually notthing:

dbtecnocasa:{root}:/>format
Searching for disks...done

c2t1d0: configured with capacity of 6.56MB
c2t1d30: configured with capacity of 34.04GB
c2t1d31: configured with capacity of 34.04GB
c2t1d81: configured with capacity of 34.04GB

AVAILABLE DISK SELECTIONS:
       0. c0t0d0 <SUN18G cyl 7506 alt 2 hd 19 sec 248>
          /pci@1f,4000/scsi@3/sd@0,0
       1. c2t1d0 <EMC-SYMMETRIX-5567 cyl 14 alt 2 hd 15 sec 64>
          /pci@4,2000/scsi@1/sd@1,0
       2. c2t1d30 <EMC-SYMMETRIX-5567 cyl 37178 alt 2 hd 30 sec 64>
          /pci@4,2000/scsi@1/sd@1,1e
       3. c2t1d31 <EMC-SYMMETRIX-5567 cyl 37178 alt 2 hd 30 sec 64>
          /pci@4,2000/scsi@1/sd@1,1f
       4. c2t1d81 <EMC-SYMMETRIX-5567 cyl 37178 alt 2 hd 30 sec 64>
          /pci@4,2000/scsi@1/sd@1,51

except of c0t0d0 everything else is network attached...