Re: promise PDC20267 onboard supermicro P3TDDE

Don Krause (dkrause@optivus.com)
05 Jun 2002 10:40:47 -0700


On Wed, 2002-06-05 at 10:20, William Thompson wrote:
> When I boot linux on this system and there is a disk attached to the promise
> connector, the system hard locks. It finds the PDC20267 and the Via ide
> chipsets (in that order) and freezes here. It doesn't show anything else.
>
> I tried kernels 2.4.18 and 2.4.19-pre10.
>
> I also tried making ide a module, loading ide-mod.o freezes as well.
>
> Removing the hdd from the controller and it boots just fine. I tried a
> Quantum fireball lct10 05 and a seagate st34311a with the same results.
>
> The bios on the pdc controller is v1.31
> -

FWIW, I also have this exact problem on a MSI 694D Pro Ar Mainboard,
with an onboard Promise PDC20265.

Every kernel I've tried (up to 2.4.19-pre7) froze hard right after
detecting the promise controller. It only hangs if there is a (any)
device plugged into the controller.

(Don't have much more info at this point, I needed this box for work, so
it got stuck with w2k, while my primary linux box is a ump 566. <sigh>
I'd love to swap these two boxes, the 694 has a pair of 933's and a gig
of memory, and sits mostly idle)

-- 
Don Krause                                            

- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/