Re: linux-2.4.19-pre9 and sym53c8xx problem

[Christian Thalinger]

On Sun, 2002-06-02 at 02:34, Douglas Gilbert wrote:
> Christian,
> What does the output of "cat /proc/scsi/sg/*" look like?
> 
> Cdrecord should see your plextor writer both as /dev/scd0
> and /dev/sg0 (assuming you don't have any other scsi devices).
> Cdrecord goes on to scan the parallel generic devices (i.e. /dev/pg*)
> if it doesn't find anything suitable on its /dev/sg* scan.
> 
> Your post doesn't supply any information that would link
> this problem with the sym53c8xxx driver. If there is some
> problem then there will be some "noise" in the /var/log/messages
> file [typically showing multiple scsi bus resets].
> 
> BTW The "-vv" switch (and/or "-VV") on cdrecord will yield more
> debug information. strace may also be useful.
> 
> Doug Gilbert
> 

Sorry, was my fault. Lost CONFIG_CHR_DEV_SG during make oldconfig.

Anyway, thanks for your reply. It helped to find the problem...