Sun Jun 2 03:31:56 CEST 2002 ide-clean-80
- Sanitize the handling of the ioctl's and fix a bug on the way in dealing with
the WIN_SMART command where arguments where exchanged.
- Finally sanitize ioctl further until it turned out that we could get rid of
the special request type REQ_DRIVE_CMD entierly. We are now using
consistently REQ_DRIVE_ACB.
One hidden code path less again!
- Realize the ide_end_drive_cmd can be on the REQ_DRIVE_ACB only for ioctl() to
a disk. Eliminate it's usage from device type driver modules.
- Remove command member from struct hd_drive_task_hdr and place it in strcut
ata_taskfile. It is not common between the normal register file and HOB.
We will have to introduce some helper functions for particular command types.
--------------000405080005030907020401
Content-Type: text/plain;
name="ide-clean-80.diff"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
filename="ide-clean-80.diff"
diff -urN linux-2.5.19/drivers/block/ll_rw_blk.c linux/drivers/block/ll_rw_blk.c
--- linux-2.5.19/drivers/block/ll_rw_blk.c 2002-05-29 20:42:46.000000000 +0200
+++ linux/drivers/block/ll_rw_blk.c 2002-06-02 06:33:53.000000000 +0200
@@ -490,11 +490,21 @@
}
}
-static char *rq_flags[] = { "REQ_RW", "REQ_RW_AHEAD", "REQ_BARRIER",
- "REQ_CMD", "REQ_NOMERGE", "REQ_STARTED",
- "REQ_DONTPREP", "REQ_QUEUED", "REQ_DRIVE_CMD",
- "REQ_DRIVE_ACB", "REQ_PC", "REQ_BLOCK_PC",
- "REQ_SENSE", "REQ_SPECIAL" };
+static char *rq_flags[] = {
+ "REQ_RW",
+ "REQ_RW_AHEAD",
+ "REQ_BARRIER",
+ "REQ_CMD",
+ "REQ_NOMERGE",
+ "REQ_STARTED",
+ "REQ_DONTPREP",
+ "REQ_QUEUED",
+ "REQ_DRIVE_ACB",
+ "REQ_PC",
+ "REQ_BLOCK_PC",
+ "REQ_SENSE",
+ "REQ_SPECIAL"
+};
void blk_dump_rq_flags(struct request *rq, char *msg)
{
diff -urN linux-2.5.19/drivers/ide/ide.c linux/drivers/ide/ide.c
--- linux-2.5.19/drivers/ide/ide.c 2002-06-02 07:28:28.000000000 +0200
+++ linux/drivers/ide/ide.c 2002-06-02 07:09:29.000000000 +0200
@@ -395,38 +395,30 @@
*
* Should be called under lock held.
*/
-void ide_end_drive_cmd(struct ata_device *drive, struct request *rq, u8 err)
+void ide_end_drive_cmd(struct ata_device *drive, struct request *rq)
{
- if (rq->flags & REQ_DRIVE_CMD) {
- u8 *args = rq->buffer;
- rq->errors = !ata_status(drive, READY_STAT, BAD_STAT);
- if (args) {
- args[0] = drive->status;
- args[1] = err;
- args[2] = IN_BYTE(IDE_NSECTOR_REG);
- }
- } else if (rq->flags & REQ_DRIVE_ACB) {
- struct ata_taskfile *args = rq->special;
+ if (rq->flags & REQ_DRIVE_ACB) {
+ struct ata_taskfile *ar = rq->special;
rq->errors = !ata_status(drive, READY_STAT, BAD_STAT);
- if (args) {
- args->taskfile.feature = err;
- args->taskfile.sector_count = IN_BYTE(IDE_NSECTOR_REG);
- args->taskfile.sector_number = IN_BYTE(IDE_SECTOR_REG);
- args->taskfile.low_cylinder = IN_BYTE(IDE_LCYL_REG);
- args->taskfile.high_cylinder = IN_BYTE(IDE_HCYL_REG);
- args->taskfile.device_head = IN_BYTE(IDE_SELECT_REG);
- args->taskfile.command = drive->status;
+ if (ar) {
+ ar->taskfile.feature = IN_BYTE(IDE_ERROR_REG);
+ ar->taskfile.sector_count = IN_BYTE(IDE_NSECTOR_REG);
+ ar->taskfile.sector_number = IN_BYTE(IDE_SECTOR_REG);
+ ar->taskfile.low_cylinder = IN_BYTE(IDE_LCYL_REG);
+ ar->taskfile.high_cylinder = IN_BYTE(IDE_HCYL_REG);
+ ar->taskfile.device_head = IN_BYTE(IDE_SELECT_REG);
+ ar->cmd = drive->status;
if ((drive->id->command_set_2 & 0x0400) &&
(drive->id->cfs_enable_2 & 0x0400) &&
(drive->addressing == 1)) {
/* The following command goes to the hob file! */
OUT_BYTE(0x80, drive->channel->io_ports[IDE_CONTROL_OFFSET]);
- args->hobfile.feature = IN_BYTE(IDE_FEATURE_REG);
- args->hobfile.sector_count = IN_BYTE(IDE_NSECTOR_REG);
- args->hobfile.sector_number = IN_BYTE(IDE_SECTOR_REG);
- args->hobfile.low_cylinder = IN_BYTE(IDE_LCYL_REG);
- args->hobfile.high_cylinder = IN_BYTE(IDE_HCYL_REG);
+ ar->hobfile.feature = IN_BYTE(IDE_FEATURE_REG);
+ ar->hobfile.sector_count = IN_BYTE(IDE_NSECTOR_REG);
+ ar->hobfile.sector_number = IN_BYTE(IDE_SECTOR_REG);
+ ar->hobfile.low_cylinder = IN_BYTE(IDE_LCYL_REG);
+ ar->hobfile.high_cylinder = IN_BYTE(IDE_HCYL_REG);
}
}
}
@@ -583,7 +575,7 @@
memset(&args, 0, sizeof(args));
args.taskfile.sector_count = drive->sect;
- args.taskfile.command = WIN_RESTORE;
+ args.cmd = WIN_RESTORE;
args.handler = recal_intr;
ata_taskfile(drive, &args, NULL);
}
@@ -602,10 +594,12 @@
err = ide_dump_status(drive, rq, msg, stat);
if (!drive || !rq)
return ide_stopped;
+
/* retry only "normal" I/O: */
if (!(rq->flags & REQ_CMD)) {
rq->errors = 1;
- ide_end_drive_cmd(drive, rq, err);
+ ide_end_drive_cmd(drive, rq);
+
return ide_stopped;
}
/* other bits are useless when BUSY */
@@ -649,30 +643,6 @@
}
/*
- * Invoked on completion of a special DRIVE_CMD.
- */
-static ide_startstop_t drive_cmd_intr(struct ata_device *drive, struct request *rq)
-{
- u8 *args = rq->buffer;
-
- ide__sti(); /* local CPU only */
- if (!ata_status(drive, 0, DRQ_STAT) && args && args[3]) {
- int retries = 10;
-
- ata_read(drive, &args[4], args[3] * SECTOR_WORDS);
-
- while (!ata_status(drive, 0, BUSY_STAT) && retries--)
- udelay(100);
- }
-
- if (!ata_status(drive, READY_STAT, BAD_STAT))
- return ata_error(drive, rq, __FUNCTION__); /* already calls ide_end_drive_cmd */
- ide_end_drive_cmd(drive, rq, GET_ERR());
-
- return ide_stopped;
-}
-
-/*
* Busy-wait for the drive status to be not "busy". Check then the status for
* all of the "good" bits and none of the "bad" bits, and if all is okay it
* returns 0. All other cases return 1 after invoking error handler -- caller
@@ -775,53 +745,20 @@
}
}
- /* This issues a special drive command, usually initiated by ioctl()
- * from the external hdparm program.
+ /* This issues a special drive command.
*/
if (rq->flags & REQ_DRIVE_ACB) {
- struct ata_taskfile *args = rq->special;
+ struct ata_taskfile *ar = rq->special;
- if (!(args))
+ if (!(ar))
goto args_error;
- ata_taskfile(drive, args, NULL);
-
- if (((args->command_type == IDE_DRIVE_TASK_RAW_WRITE) ||
- (args->command_type == IDE_DRIVE_TASK_OUT)) &&
- args->prehandler && args->handler)
- return args->prehandler(drive, rq);
-
- return ide_started;
- }
+ ata_taskfile(drive, ar, NULL);
- if (rq->flags & REQ_DRIVE_CMD) {
- u8 *args = rq->buffer;
-
- if (!(args))
- goto args_error;
-#ifdef DEBUG
- printk("%s: DRIVE_CMD ", drive->name);
- printk("cmd=0x%02x ", args[0]);
- printk(" sc=0x%02x ", args[1]);
- printk(" fr=0x%02x ", args[2]);
- printk(" xx=0x%02x\n", args[3]);
-#endif
- ide_set_handler(drive, drive_cmd_intr, WAIT_CMD, NULL);
- ata_irq_enable(drive, 1);
- ata_mask(drive);
- if (args[0] == WIN_SMART) {
- struct hd_drive_task_hdr regfile;
- regfile.feature = args[2];
- regfile.sector_count = args[3];
- regfile.sector_number = args[1];
- regfile.low_cylinder = 0x4f;
- regfile.high_cylinder = 0xc2;
- ata_out_regfile(drive, ®file);
- } else {
- OUT_BYTE(args[2], IDE_FEATURE_REG);
- OUT_BYTE(args[1], IDE_NSECTOR_REG);
- }
- OUT_BYTE(args[0], IDE_COMMAND_REG);
+ if (((ar->command_type == IDE_DRIVE_TASK_RAW_WRITE) ||
+ (ar->command_type == IDE_DRIVE_TASK_OUT)) &&
+ ar->prehandler && ar->handler)
+ return ar->prehandler(drive, rq);
return ide_started;
}
@@ -863,7 +800,7 @@
#ifdef DEBUG
printk("%s: DRIVE_CMD (null)\n", drive->name);
#endif
- ide_end_drive_cmd(drive, rq, GET_ERR());
+ ide_end_drive_cmd(drive, rq);
return ide_stopped;
}
diff -urN linux-2.5.19/drivers/ide/ide-disk.c linux/drivers/ide/ide-disk.c
--- linux-2.5.19/drivers/ide/ide-disk.c 2002-06-02 07:28:28.000000000 +0200
+++ linux/drivers/ide/ide-disk.c 2002-06-02 07:18:26.000000000 +0200
@@ -170,7 +170,7 @@
args.taskfile.device_head = head;
args.taskfile.device_head |= drive->select.all;
- args.taskfile.command = get_command(drive, rq_data_dir(rq));
+ args.cmd = get_command(drive, rq_data_dir(rq));
#ifdef DEBUG
printk("%s: %sing: ", drive->name,
@@ -211,7 +211,7 @@
args.taskfile.device_head = ((block >> 8) & 0x0f);
args.taskfile.device_head |= drive->select.all;
- args.taskfile.command = get_command(drive, rq_data_dir(rq));
+ args.cmd = get_command(drive, rq_data_dir(rq));
#ifdef DEBUG
printk("%s: %sing: ", drive->name,
@@ -264,7 +264,7 @@
args.hobfile.high_cylinder = (block >>= 8); /* hi lba */
args.hobfile.device_head = drive->select.all;
- args.taskfile.command = get_command(drive, rq_data_dir(rq));
+ args.cmd = get_command(drive, rq_data_dir(rq));
#ifdef DEBUG
printk("%s: %sing: ", drive->name,
@@ -355,7 +355,7 @@
memset(&args, 0, sizeof(args));
- args.taskfile.command = WIN_DOORLOCK;
+ args.cmd = WIN_DOORLOCK;
ide_cmd_type_parser(&args);
/*
@@ -377,9 +377,9 @@
memset(&args, 0, sizeof(args));
if (drive->id->cfs_enable_2 & 0x2400)
- args.taskfile.command = WIN_FLUSH_CACHE_EXT;
+ args.cmd = WIN_FLUSH_CACHE_EXT;
else
- args.taskfile.command = WIN_FLUSH_CACHE;
+ args.cmd = WIN_FLUSH_CACHE;
ide_cmd_type_parser(&args);
@@ -395,7 +395,7 @@
invalidate_bdev(inode->i_bdev, 0);
memset(&args, 0, sizeof(args));
- args.taskfile.command = WIN_DOORUNLOCK;
+ args.cmd = WIN_DOORUNLOCK;
ide_cmd_type_parser(&args);
if (drive->doorlocking &&
@@ -444,7 +444,7 @@
memset(&args, 0, sizeof(args));
args.taskfile.sector_count = arg;
- args.taskfile.command = WIN_SETMULT;
+ args.cmd = WIN_SETMULT;
ide_cmd_type_parser(&args);
if (!ide_raw_taskfile(drive, &args)) {
@@ -475,7 +475,7 @@
memset(&args, 0, sizeof(args));
args.taskfile.feature = (arg) ? SETFEATURES_EN_WCACHE : SETFEATURES_DIS_WCACHE;
- args.taskfile.command = WIN_SETFEATURES;
+ args.cmd = WIN_SETFEATURES;
ide_cmd_type_parser(&args);
ide_raw_taskfile(drive, &args);
@@ -489,7 +489,7 @@
struct ata_taskfile args;
memset(&args, 0, sizeof(args));
- args.taskfile.command = WIN_STANDBYNOW1;
+ args.cmd = WIN_STANDBYNOW1;
ide_cmd_type_parser(&args);
return ide_raw_taskfile(drive, &args);
@@ -502,7 +502,7 @@
memset(&args, 0, sizeof(args));
args.taskfile.feature = (arg)?SETFEATURES_EN_AAM:SETFEATURES_DIS_AAM;
args.taskfile.sector_count = arg;
- args.taskfile.command = WIN_SETFEATURES;
+ args.cmd = WIN_SETFEATURES;
ide_cmd_type_parser(&args);
ide_raw_taskfile(drive, &args);
@@ -622,14 +622,14 @@
/* Create IDE/ATA command request structure */
memset(&args, 0, sizeof(args));
args.taskfile.device_head = 0x40;
- args.taskfile.command = WIN_READ_NATIVE_MAX;
+ args.cmd = WIN_READ_NATIVE_MAX;
args.handler = task_no_data_intr;
/* submit command request */
ide_raw_taskfile(drive, &args);
/* if OK, compute maximum address value */
- if ((args.taskfile.command & 0x01) == 0) {
+ if ((args.cmd & 0x01) == 0) {
addr = ((args.taskfile.device_head & 0x0f) << 24)
| (args.taskfile.high_cylinder << 16)
| (args.taskfile.low_cylinder << 8)
@@ -650,14 +650,14 @@
memset(&args, 0, sizeof(args));
args.taskfile.device_head = 0x40;
- args.taskfile.command = WIN_READ_NATIVE_MAX_EXT;
+ args.cmd = WIN_READ_NATIVE_MAX_EXT;
args.handler = task_no_data_intr;
/* submit command request */
ide_raw_taskfile(drive, &args);
/* if OK, compute maximum address value */
- if ((args.taskfile.command & 0x01) == 0) {
+ if ((args.cmd & 0x01) == 0) {
u32 high = (args.hobfile.high_cylinder << 16) |
(args.hobfile.low_cylinder << 8) |
args.hobfile.sector_number;
@@ -691,12 +691,12 @@
args.taskfile.high_cylinder = (addr_req >> 16);
args.taskfile.device_head = ((addr_req >> 24) & 0x0f) | 0x40;
- args.taskfile.command = WIN_SET_MAX;
+ args.cmd = WIN_SET_MAX;
args.handler = task_no_data_intr;
/* submit command request */
ide_raw_taskfile(drive, &args);
/* if OK, read new maximum address value */
- if ((args.taskfile.command & 0x01) == 0) {
+ if ((args.cmd & 0x01) == 0) {
addr_set = ((args.taskfile.device_head & 0x0f) << 24)
| (args.taskfile.high_cylinder << 16)
| (args.taskfile.low_cylinder << 8)
@@ -719,7 +719,7 @@
args.taskfile.low_cylinder = (addr_req >>= 8);
args.taskfile.high_cylinder = (addr_req >>= 8);
args.taskfile.device_head = 0x40;
- args.taskfile.command = WIN_SET_MAX_EXT;
+ args.cmd = WIN_SET_MAX_EXT;
args.hobfile.sector_number = (addr_req >>= 8);
args.hobfile.low_cylinder = (addr_req >>= 8);
@@ -731,7 +731,7 @@
/* submit command request */
ide_raw_taskfile(drive, &args);
/* if OK, compute maximum address value */
- if ((args.taskfile.command & 0x01) == 0) {
+ if ((args.cmd & 0x01) == 0) {
u32 high = (args.hobfile.high_cylinder << 16) |
(args.hobfile.low_cylinder << 8) |
args.hobfile.sector_number;
diff -urN linux-2.5.19/drivers/ide/ide-floppy.c linux/drivers/ide/ide-floppy.c
--- linux-2.5.19/drivers/ide/ide-floppy.c 2002-06-02 07:28:28.000000000 +0200
+++ linux/drivers/ide/ide-floppy.c 2002-06-02 06:51:41.000000000 +0200
@@ -620,7 +620,7 @@
#if IDEFLOPPY_DEBUG_LOG
printk (KERN_INFO "Reached idefloppy_end_request\n");
-#endif /* IDEFLOPPY_DEBUG_LOG */
+#endif
switch (uptodate) {
case 0: error = IDEFLOPPY_ERROR_GENERAL; break;
@@ -632,12 +632,16 @@
/* Why does this happen? */
if (!rq)
return 0;
+
if (!(rq->flags & IDEFLOPPY_RQ)) {
ide_end_request(drive, rq, uptodate);
return 0;
}
+
rq->errors = error;
- ide_end_drive_cmd (drive, rq, 0);
+ blkdev_dequeue_request(rq);
+ drive->rq = NULL;
+ end_that_request_last(rq);
return 0;
}
diff -urN linux-2.5.19/drivers/ide/ide-tape.c linux/drivers/ide/ide-tape.c
--- linux-2.5.19/drivers/ide/ide-tape.c 2002-06-02 07:28:28.000000000 +0200
+++ linux/drivers/ide/ide-tape.c 2002-06-02 06:52:11.000000000 +0200
@@ -1864,9 +1864,12 @@
idetape_increase_max_pipeline_stages (drive);
}
}
- ide_end_drive_cmd(drive, rq, 0);
+ blkdev_dequeue_request(rq);
+ drive->rq = NULL;
+ end_that_request_last(rq);
+
if (remove_stage)
- idetape_remove_stage_head (drive);
+ idetape_remove_stage_head(drive);
if (tape->active_data_request == NULL)
clear_bit(IDETAPE_PIPELINE_ACTIVE, &tape->flags);
spin_unlock_irqrestore(&tape->spinlock, flags);
diff -urN linux-2.5.19/drivers/ide/ide-taskfile.c linux/drivers/ide/ide-taskfile.c
--- linux-2.5.19/drivers/ide/ide-taskfile.c 2002-06-02 07:28:28.000000000 +0200
+++ linux/drivers/ide/ide-taskfile.c 2002-06-02 07:07:28.000000000 +0200
@@ -311,34 +311,34 @@
}
ide_startstop_t ata_taskfile(struct ata_device *drive,
- struct ata_taskfile *args, struct request *rq)
+ struct ata_taskfile *ar, struct request *rq)
{
struct hd_driveid *id = drive->id;
/* (ks/hs): Moved to start, do not use for multiple out commands */
- if (args->handler != task_mulout_intr) {
+ if (ar->handler != task_mulout_intr) {
ata_irq_enable(drive, 1);
ata_mask(drive);
}
if ((id->command_set_2 & 0x0400) && (id->cfs_enable_2 & 0x0400) &&
(drive->addressing == 1))
- ata_out_regfile(drive, &args->hobfile);
+ ata_out_regfile(drive, &ar->hobfile);
- ata_out_regfile(drive, &args->taskfile);
+ ata_out_regfile(drive, &ar->taskfile);
{
u8 HIHI = (drive->addressing) ? 0xE0 : 0xEF;
- OUT_BYTE((args->taskfile.device_head & HIHI) | drive->select.all, IDE_SELECT_REG);
+ OUT_BYTE((ar->taskfile.device_head & HIHI) | drive->select.all, IDE_SELECT_REG);
}
- if (args->handler != NULL) {
+ if (ar->handler != NULL) {
/* This is apparently supposed to reset the wait timeout for
* the interrupt to accur.
*/
- ide_set_handler(drive, args->handler, WAIT_CMD, NULL);
- OUT_BYTE(args->taskfile.command, IDE_COMMAND_REG);
+ ide_set_handler(drive, ar->handler, WAIT_CMD, NULL);
+ OUT_BYTE(ar->cmd, IDE_COMMAND_REG);
/*
* Warning check for race between handler and prehandler for
@@ -346,8 +346,8 @@
* inside the boundaries of the seek, we should be okay.
*/
- if (args->prehandler != NULL)
- return args->prehandler(drive, rq);
+ if (ar->prehandler != NULL)
+ return ar->prehandler(drive, rq);
} else {
/*
* FIXME: this is a gross hack, need to unify tcq dma proc and
@@ -358,21 +358,20 @@
return ide_started;
/* for dma commands we don't set the handler */
- if (args->taskfile.command == WIN_WRITEDMA
- || args->taskfile.command == WIN_WRITEDMA_EXT)
+ if (ar->cmd == WIN_WRITEDMA || ar->cmd == WIN_WRITEDMA_EXT)
return !udma_write(drive, rq);
- else if (args->taskfile.command == WIN_READDMA
- || args->taskfile.command == WIN_READDMA_EXT)
+ else if (ar->cmd == WIN_READDMA
+ || ar->cmd == WIN_READDMA_EXT)
return !udma_read(drive, rq);
#ifdef CONFIG_BLK_DEV_IDE_TCQ
- else if (args->taskfile.command == WIN_WRITEDMA_QUEUED
- || args->taskfile.command == WIN_WRITEDMA_QUEUED_EXT
- || args->taskfile.command == WIN_READDMA_QUEUED
- || args->taskfile.command == WIN_READDMA_QUEUED_EXT)
+ else if (ar->cmd == WIN_WRITEDMA_QUEUED
+ || ar->cmd == WIN_WRITEDMA_QUEUED_EXT
+ || ar->cmd == WIN_READDMA_QUEUED
+ || ar->cmd == WIN_READDMA_QUEUED_EXT)
return udma_tcq_taskfile(drive, rq);
#endif
else {
- printk("ata_taskfile: unknown command %x\n", args->taskfile.command);
+ printk("ata_taskfile: unknown command %x\n", ar->cmd);
return ide_stopped;
}
}
@@ -396,18 +395,18 @@
*/
ide_startstop_t task_no_data_intr(struct ata_device *drive, struct request *rq)
{
- struct ata_taskfile *args = rq->special;
+ struct ata_taskfile *ar = rq->special;
ide__sti(); /* local CPU only */
if (!ata_status(drive, READY_STAT, BAD_STAT)) {
/* Keep quiet for NOP because it is expected to fail. */
- if (args && args->taskfile.command != WIN_NOP)
+ if (ar && ar->cmd != WIN_NOP)
return ata_error(drive, rq, __FUNCTION__);
}
- if (args)
- ide_end_drive_cmd(drive, rq, GET_ERR());
+ if (ar)
+ ide_end_drive_cmd(drive, rq);
return ide_stopped;
}
@@ -466,8 +465,8 @@
}
/* (ks/hs): Fixed Multi Write */
- if ((args->taskfile.command != WIN_MULTWRITE) &&
- (args->taskfile.command != WIN_MULTWRITE_EXT)) {
+ if ((args->cmd != WIN_MULTWRITE) &&
+ (args->cmd != WIN_MULTWRITE_EXT)) {
unsigned long flags;
char *buf = ide_map_rq(rq, &flags);
/* For Write_sectors we need to stuff the first sector */
@@ -569,7 +568,7 @@
args->prehandler = NULL;
args->handler = NULL;
- switch(args->taskfile.command) {
+ switch (args->cmd) {
case WIN_IDENTIFY:
case WIN_PIDENTIFY:
args->handler = task_in_intr;
@@ -817,13 +816,6 @@
memset(&rq, 0, sizeof(rq));
rq.flags = REQ_DRIVE_ACB;
-
-#if 0
- if (args->command_type != IDE_DRIVE_TASK_NO_DATA)
- rq.current_nr_sectors = rq.nr_sectors
- = (args->hobfile.sector_count << 8)
- | args->taskfile.sector_count;
-#endif
rq.special = args;
return ide_do_drive_cmd(drive, &rq, ide_wait);
diff -urN linux-2.5.19/drivers/ide/ioctl.c linux/drivers/ide/ioctl.c
--- linux-2.5.19/drivers/ide/ioctl.c 2002-06-02 07:28:28.000000000 +0200
+++ linux/drivers/ide/ioctl.c 2002-06-02 07:10:02.000000000 +0200
@@ -23,6 +23,7 @@
#include <linux/errno.h>
#include <linux/blkpg.h>
#include <linux/pci.h>
+#include <linux/delay.h>
#include <linux/cdrom.h>
#include <linux/device.h>
@@ -33,42 +34,67 @@
#include "ioctl.h"
/*
+ * Invoked on completion of a special DRIVE_CMD.
+ */
+static ide_startstop_t drive_cmd_intr(struct ata_device *drive, struct request *rq)
+{
+ struct ata_taskfile *ar = rq->special;
+
+ ide__sti(); /* local CPU only */
+ if (!ata_status(drive, 0, DRQ_STAT) && ar->taskfile.sector_number) {
+ int retries = 10;
+
+ ata_read(drive, rq->buffer, ar->taskfile.sector_number * SECTOR_WORDS);
+
+ while (!ata_status(drive, 0, BUSY_STAT) && retries--)
+ udelay(100);
+ }
+
+ if (!ata_status(drive, READY_STAT, BAD_STAT))
+ return ata_error(drive, rq, __FUNCTION__); /* already calls ide_end_drive_cmd */
+ ide_end_drive_cmd(drive, rq);
+
+ return ide_stopped;
+}
+
+/*
* Implement generic ioctls invoked from userspace to imlpement specific
* functionality.
*
* Unfortunately every single low level programm out there is using this
* interface.
*/
-static int cmd_ioctl(struct ata_device *drive, unsigned long arg)
+static int do_cmd_ioctl(struct ata_device *drive, unsigned long arg)
{
int err = 0;
u8 vals[4];
u8 *argbuf = vals;
- u8 pio = 0;
int argsize = 4;
struct ata_taskfile args;
struct request rq;
- memset(&rq, 0, sizeof(rq));
- rq.flags = REQ_DRIVE_CMD;
-
- /* If empty parameter file - wait for drive ready.
- */
- if (!arg)
- return ide_do_drive_cmd(drive, &rq, ide_wait);
-
/* Second phase.
*/
if (copy_from_user(vals, (void *)arg, 4))
return -EFAULT;
+ memset(&rq, 0, sizeof(rq));
+ rq.flags = REQ_DRIVE_ACB;
+
+ memset(&args, 0, sizeof(args));
+
args.taskfile.feature = vals[2];
- args.taskfile.sector_count = vals[3];
- args.taskfile.sector_number = vals[1];
- args.taskfile.low_cylinder = 0x00;
- args.taskfile.high_cylinder = 0x00;
+ args.taskfile.sector_count = vals[1];
+ args.taskfile.sector_number = vals[3];
+ if (vals[0] == WIN_SMART) {
+ args.taskfile.low_cylinder = 0x4f;
+ args.taskfile.high_cylinder = 0xc2;
+ } else {
+ args.taskfile.low_cylinder = 0x00;
+ args.taskfile.high_cylinder = 0x00;
+ }
args.taskfile.device_head = 0x00;
- args.taskfile.command = vals[0];
+ args.cmd = vals[0];
if (vals[3]) {
argsize = 4 + (SECTOR_WORDS * 4 * vals[3]);
@@ -79,63 +105,18 @@
memset(argbuf + 4, 0, argsize - 4);
}
- /*
- * Always make sure the transfer reate has been setup.
- *
- * FIXME: what about setting up the drive with ->tuneproc?
- *
- * Backside of HDIO_DRIVE_CMD call of SETFEATURES_XFER.
- * 1 : Safe to update drive->id DMA registers.
- * 0 : OOPs not allowed.
- */
- if ((args.taskfile.command == WIN_SETFEATURES) &&
- (args.taskfile.sector_number >= XFER_SW_DMA_0) &&
- (args.taskfile.feature == SETFEATURES_XFER) &&
- (drive->id->dma_ultra ||
- drive->id->dma_mword ||
- drive->id->dma_1word)) {
- pio = vals[1];
- /*
- * Verify that we are doing an approved SETFEATURES_XFER with
- * respect to the hardware being able to support request.
- * Since some hardware can improperly report capabilties, we
- * check to see if the host adapter in combination with the
- * device (usually a disk) properly detect and acknowledge each
- * end of the ribbon.
- */
- if (args.taskfile.sector_number > XFER_UDMA_2) {
- if (!drive->channel->udma_four) {
- printk(KERN_WARNING "%s: Speed warnings UDMA > 2 is not functional.\n",
- drive->channel->name);
- goto abort;
- }
-#ifndef CONFIG_IDEDMA_IVB
- if (!(drive->id->hw_config & 0x6000))
-#else
- if (!(drive->id->hw_config & 0x2000) ||
- !(drive->id->hw_config & 0x4000))
-#endif
- {
- printk(KERN_WARNING "%s: Speed warnings UDMA > 2 is not functional.\n",
- drive->name);
- goto abort;
- }
- }
- }
-
/* Issue ATA command and wait for completion.
*/
- rq.buffer = argbuf;
+ args.handler = drive_cmd_intr;
+
+ rq.buffer = argbuf + 4;
+ rq.special = &args;
err = ide_do_drive_cmd(drive, &rq, ide_wait);
- if (!err && pio) {
- /* active-retuning-calls future */
- /* FIXME: what about the setup for the drive?! */
- if (drive->channel->speedproc)
- drive->channel->speedproc(drive, pio);
- }
+ argbuf[0] = drive->status;
+ argbuf[1] = args.taskfile.feature;
+ argbuf[2] = args.taskfile.sector_count;
-abort:
if (copy_to_user((void *)arg, argbuf, argsize))
err = -EFAULT;
@@ -153,7 +134,6 @@
{
unsigned int major, minor;
struct ata_device *drive;
-// struct request rq;
kdev_t dev;
dev = inode->i_rdev;
@@ -354,10 +334,14 @@
return 0;
case HDIO_DRIVE_CMD:
- if (!capable(CAP_SYS_RAWIO))
- return -EACCES;
+ if (!arg) {
+ if (ide_spin_wait_hwgroup(drive))
+ return -EBUSY;
+ else
+ return 0;
+ }
- return cmd_ioctl(drive, arg);
+ return do_cmd_ioctl(drive, arg);
/*
* uniform packet command handling
diff -urN linux-2.5.19/drivers/ide/pcidma.c linux/drivers/ide/pcidma.c
--- linux-2.5.19/drivers/ide/pcidma.c 2002-06-01 23:17:28.000000000 +0200
+++ linux/drivers/ide/pcidma.c 2002-06-02 07:11:16.000000000 +0200
@@ -541,9 +541,10 @@
ide_set_handler(drive, ide_dma_intr, WAIT_CMD, dma_timer_expiry); /* issue cmd to drive */
if ((rq->flags & REQ_DRIVE_ACB) && (drive->addressing == 1)) {
+ /* FIXME: this should never happen */
struct ata_taskfile *args = rq->special;
- outb(args->taskfile.command, IDE_COMMAND_REG);
+ outb(args->cmd, IDE_COMMAND_REG);
} else if (drive->addressing) {
outb(reading ? WIN_READDMA_EXT : WIN_WRITEDMA_EXT, IDE_COMMAND_REG);
} else {
diff -urN linux-2.5.19/drivers/ide/pdc4030.c linux/drivers/ide/pdc4030.c
--- linux-2.5.19/drivers/ide/pdc4030.c 2002-06-01 23:17:28.000000000 +0200
+++ linux/drivers/ide/pdc4030.c 2002-06-02 07:13:34.000000000 +0200
@@ -630,7 +630,7 @@
outb(taskfile->low_cylinder, IDE_LCYL_REG);
outb(taskfile->high_cylinder, IDE_HCYL_REG);
outb(taskfile->device_head, IDE_SELECT_REG);
- outb(taskfile->command, IDE_COMMAND_REG);
+ outb(args->cmd, IDE_COMMAND_REG);
switch (rq_data_dir(rq)) {
case READ:
@@ -708,7 +708,7 @@
args.taskfile.low_cylinder = (block>>=8);
args.taskfile.high_cylinder = (block>>=8);
args.taskfile.device_head = ((block>>8)&0x0f)|drive->select.all;
- args.taskfile.command = (rq_data_dir(rq)==READ)?PROMISE_READ:PROMISE_WRITE;
+ args.cmd = (rq_data_dir(rq)==READ)?PROMISE_READ:PROMISE_WRITE;
/* We can't call ide_cmd_type_parser here, since it won't understand
our command, but that doesn't matter, since we don't use the
diff -urN linux-2.5.19/drivers/ide/tcq.c linux/drivers/ide/tcq.c
--- linux-2.5.19/drivers/ide/tcq.c 2002-06-01 23:17:28.000000000 +0200
+++ linux/drivers/ide/tcq.c 2002-06-02 07:12:17.000000000 +0200
@@ -60,7 +60,7 @@
struct ata_taskfile *args = rq->special;
ide__sti();
- ide_end_drive_cmd(drive, rq, GET_ERR());
+ ide_end_drive_cmd(drive, rq);
kfree(args);
return ide_stopped;
@@ -118,7 +118,7 @@
BUG_ON(!rq);
rq->special = args;
- args->taskfile.command = WIN_NOP;
+ args->cmd = WIN_NOP;
args->handler = tcq_nop_handler;
args->command_type = IDE_DRIVE_TASK_NO_DATA;
@@ -407,7 +407,7 @@
memset(&args, 0, sizeof(args));
args.taskfile.feature = 0x01;
- args.taskfile.command = WIN_NOP;
+ args.cmd = WIN_NOP;
ide_cmd_type_parser(&args);
/*
@@ -442,7 +442,7 @@
memset(&args, 0, sizeof(args));
args.taskfile.feature = SETFEATURES_EN_WCACHE;
- args.taskfile.command = WIN_SETFEATURES;
+ args.cmd = WIN_SETFEATURES;
ide_cmd_type_parser(&args);
if (ide_raw_taskfile(drive, &args)) {
@@ -456,7 +456,7 @@
*/
memset(&args, 0, sizeof(args));
args.taskfile.feature = SETFEATURES_DIS_RI;
- args.taskfile.command = WIN_SETFEATURES;
+ args.cmd = WIN_SETFEATURES;
ide_cmd_type_parser(&args);
if (ide_raw_taskfile(drive, &args)) {
@@ -470,7 +470,7 @@
*/
memset(&args, 0, sizeof(args));
args.taskfile.feature = SETFEATURES_EN_SI;
- args.taskfile.command = WIN_SETFEATURES;
+ args.cmd = WIN_SETFEATURES;
ide_cmd_type_parser(&args);
if (ide_raw_taskfile(drive, &args)) {
@@ -554,7 +554,7 @@
ata_irq_enable(drive, 0);
#endif
- OUT_BYTE(args->taskfile.command, IDE_COMMAND_REG);
+ OUT_BYTE(args->cmd, IDE_COMMAND_REG);
if (wait_altstat(drive, &stat, BUSY_STAT)) {
ide_dump_status(drive, rq, "queued start", stat);
diff -urN linux-2.5.19/drivers/scsi/ide-scsi.c linux/drivers/scsi/ide-scsi.c
--- linux-2.5.19/drivers/scsi/ide-scsi.c 2002-06-02 07:28:28.000000000 +0200
+++ linux/drivers/scsi/ide-scsi.c 2002-06-02 04:48:47.000000000 +0200
@@ -242,7 +242,11 @@
ide_end_request(drive, rq, uptodate);
return 0;
}
- ide_end_drive_cmd(drive, rq, 0);
+
+ blkdev_dequeue_request(rq);
+ drive->rq = NULL;
+ end_that_request_last(rq);
+
if (rq->errors >= ERROR_MAX) {
pc->s.scsi_cmd->result = DID_ERROR << 16;
if (log)
diff -urN linux-2.5.19/include/linux/blkdev.h linux/include/linux/blkdev.h
--- linux-2.5.19/include/linux/blkdev.h 2002-05-29 20:42:49.000000000 +0200
+++ linux/include/linux/blkdev.h 2002-06-02 06:33:55.000000000 +0200
@@ -81,7 +81,6 @@
/*
* for ATA/ATAPI devices
*/
- __REQ_DRIVE_CMD,
__REQ_DRIVE_ACB,
__REQ_PC, /* packet command (special) */
@@ -101,7 +100,6 @@
#define REQ_STARTED (1 << __REQ_STARTED)
#define REQ_DONTPREP (1 << __REQ_DONTPREP)
#define REQ_QUEUED (1 << __REQ_QUEUED)
-#define REQ_DRIVE_CMD (1 << __REQ_DRIVE_CMD)
#define REQ_DRIVE_ACB (1 << __REQ_DRIVE_ACB)
#define REQ_PC (1 << __REQ_PC)
#define REQ_BLOCK_PC (1 << __REQ_BLOCK_PC)
diff -urN linux-2.5.19/include/linux/hdreg.h linux/include/linux/hdreg.h
--- linux-2.5.19/include/linux/hdreg.h 2002-06-02 07:28:28.000000000 +0200
+++ linux/include/linux/hdreg.h 2002-06-02 07:20:57.000000000 +0200
@@ -74,16 +74,12 @@
#define IDE_DRIVE_TASK_RAW_WRITE 4
struct hd_drive_task_hdr {
- u8 data;
u8 feature;
u8 sector_count;
u8 sector_number;
u8 low_cylinder;
u8 high_cylinder;
u8 device_head;
-
- /* FXIME: Consider moving this out from here. */
- u8 command;
} __attribute__((packed));
/*
diff -urN linux-2.5.19/include/linux/ide.h linux/include/linux/ide.h
--- linux-2.5.19/include/linux/ide.h 2002-06-02 07:28:28.000000000 +0200
+++ linux/include/linux/ide.h 2002-06-02 07:21:08.000000000 +0200
@@ -253,11 +253,11 @@
unsigned all : 8; /* all of the bits together */
struct {
#if defined(__LITTLE_ENDIAN_BITFIELD)
- unsigned XXX_head : 4; /* always zeros here */
+ unsigned head : 4; /* always zeros here */
unsigned unit : 1; /* drive select number: 0/1 */
- unsigned XXX_bit5 : 1; /* always 1 */
+ unsigned bit5 : 1; /* always 1 */
unsigned lba : 1; /* using LBA instead of CHS */
- unsigned XXX_bit7 : 1; /* always 1 */
+ unsigned bit7 : 1; /* always 1 */
#elif defined(__BIG_ENDIAN_BITFIELD)
unsigned bit7 : 1;
unsigned lba : 1;
@@ -666,11 +666,12 @@
/*
* Clean up after success/failure of an explicit drive cmd.
*/
-extern void ide_end_drive_cmd(struct ata_device *, struct request *, u8);
+extern void ide_end_drive_cmd(struct ata_device *, struct request *);
struct ata_taskfile {
struct hd_drive_task_hdr taskfile;
struct hd_drive_task_hdr hobfile;
+ u8 cmd; /* actual ATA command */
int command_type;
ide_startstop_t (*prehandler)(struct ata_device *, struct request *);
ide_startstop_t (*handler)(struct ata_device *, struct request *);
--------------000405080005030907020401--
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/