Thanks for the response. I looked at the changes
to hd.c and noticed that the function read_timer()
in drivers/ide/hd.c is not platform specific and
seems to be present in all architectures so IMHO
it'd make sense to have the spinlocks for all
architectures.
Does this make sense ?
thanks
Manik
Vojtech Pavlik wrote:
>
> On Mon, May 27, 2002 at 01:09:02PM +0530, Manik Raina wrote:
> >
> > Hi Vojtech,
> >
> > i8253_lock seems to be defined only if __i386__ is defined
> > but is accessed in drivers/char/vt.c where we could attempt
> > to lock i8253_lock even though __i386__ is not defined.
> >
> > The preprocessor check there seems to be
> >
> > #if defined(__i386__) || defined(__alpha__) || defined(__powerpc__) \
> > || (defined(__mips__) && defined(CONFIG_ISA)) \
> > || (defined(__arm__) && defined(CONFIG_HOST_FOOTBRIDGE)) \
> > || defined(__x86_64__)
> >
> > Won't this cause a build break on alpha ?
>
> Yes, you're right - it will. Ho hum, this means that Alpha has the bug
> too, though it isn't a big problem there, because the ports aren't
> accessed often (not in gettimeofday, not in timer interrupt).
>
> > Am i missing something ?
>
> No, I missed that the spinlock isn't defined on alpha probably also
> other archs that use the i8253.
>
> Possible ways to fix that:
>
> * #ifdef the spinlock code to __i386__ only.
> * Add an otherwise unused i8253_lock to other archs.
> * Add the spinlock to other archs and make them use it.
>
> Linus: What do you prefer?
>
> > thanks for your time,
> > regards
> > Manik
> >
> > Vojtech Pavlik wrote:
> > >
> > > Hi!
> > >
> > > ChangeSet@1.584, 2002-05-26 14:17:40+02:00, vojtech@twilight.ucw.cz
> > > This changeset hopefully fixes all the instances (at least on i386
> > > arch and arch-nonspecific drivers) where there the i8253 chip is
> > > accessed - to use a spinlock to serialize the multi-byte accesses.
> > > This should allow us to understand the timer problems that are
> > > happening now and then better.
> > >
> > > ChangeSet@1.583, 2002-05-26 10:30:46+02:00, vojtech@twilight.ucw.cz
> > > This cset fixes timestamp generation in ftape-calibr.c, which was
> > > missing a lock for accessing the i8253 timer. This module running
> > > together with i386/kernel/time.c could result in the timer registers
> > > losing sync with software and reporting swapped values. There was
> > > an workaround for this in ftape-calibr.c, but could never completely
> > > fix the problem. Also, there still remains a race (now commented
> > > in ftape-calibr.c), with jiffies and the i8253 timer register. This
> > > cannot be fixed easily. Last, but not least, this converts ftape
> > > timestamps on x86_64 to use TSC timer solely, because it's always
> > > present there and doesn't have all the problems with the i8253 timer.
> > >
> > > Now there shouldn't be any code accessing the i8253 timer without
> > > a spinlock held. Finally!
> > >
> > > arch/i386/kernel/apm.c | 15 +---
> > > arch/i386/kernel/i8259.c | 4 +
> > > arch/i386/kernel/time.c | 4 +
> > > drivers/char/ftape/lowlevel/ftape-calibr.c | 97 +++++++++++++----------------
> > > drivers/char/vt.c | 3
> > > drivers/ide/hd.c | 10 +-
> > > drivers/input/gameport/gameport.c | 28 +++++++-
> > > 7 files changed, 91 insertions(+), 70 deletions(-)
> > >
> > > diff -Nru a/arch/i386/kernel/apm.c b/arch/i386/kernel/apm.c
> > > --- a/arch/i386/kernel/apm.c Sun May 26 14:18:40 2002
> > > +++ b/arch/i386/kernel/apm.c Sun May 26 14:18:40 2002
> > > @@ -1170,17 +1170,14 @@
> > > {
> > > #ifdef INIT_TIMER_AFTER_SUSPEND
> > > unsigned long flags;
> > > + extern spinlock_t i8253_lock;
> > >
> > > - save_flags(flags);
> > > - cli();
> > > + spin_lock_irqsave(&i8253_lock, flags);
> > > /* set the clock to 100 Hz */
> > > - outb_p(0x34,0x43); /* binary, mode 2, LSB/MSB, ch 0 */
> > > - udelay(10);
> > > - outb_p(LATCH & 0xff , 0x40); /* LSB */
> > > - udelay(10);
> > > - outb(LATCH >> 8 , 0x40); /* MSB */
> > > - udelay(10);
> > > - restore_flags(flags);
> > > + outb_p(0x34, 0x43); /* binary, mode 2, LSB/MSB, ch 0 */
> > > + outb_p(LATCH & 0xff, 0x40); /* LSB */
> > > + outb_p(LATCH >> 8, 0x40); /* MSB */
> > > + spin_unlock_irqrestore(&i8253_lock, flags);
> > > #endif
> > > }
> > >
> > > diff -Nru a/arch/i386/kernel/i8259.c b/arch/i386/kernel/i8259.c
> > > --- a/arch/i386/kernel/i8259.c Sun May 26 14:18:40 2002
> > > +++ b/arch/i386/kernel/i8259.c Sun May 26 14:18:40 2002
> > > @@ -360,6 +360,8 @@
> > > void __init init_IRQ(void)
> > > {
> > > int i;
> > > + extern spinlock_t i8253_lock;
> > > + unsigned long flags;
> > >
> > > #ifndef CONFIG_X86_VISWS_APIC
> > > init_ISA_irqs();
> > > @@ -415,9 +417,11 @@
> > > * Set the clock to HZ Hz, we already have a valid
> > > * vector now:
> > > */
> > > + spin_lock_irqsave(&i8253_lock, flags);
> > > outb_p(0x34,0x43); /* binary, mode 2, LSB/MSB, ch 0 */
> > > outb_p(LATCH & 0xff , 0x40); /* LSB */
> > > outb(LATCH >> 8 , 0x40); /* MSB */
> > > + spin_unlock_irqrestore(&i8253_lock, flags);
> > >
> > > #ifndef CONFIG_VISWS
> > > setup_irq(2, &irq2);
> > > diff -Nru a/arch/i386/kernel/time.c b/arch/i386/kernel/time.c
> > > --- a/arch/i386/kernel/time.c Sun May 26 14:18:40 2002
> > > +++ b/arch/i386/kernel/time.c Sun May 26 14:18:40 2002
> > > @@ -574,6 +574,8 @@
> > >
> > > static unsigned long __init calibrate_tsc(void)
> > > {
> > > + unsigned long flags;
> > > +
> > > /* Set the Gate high, disable speaker */
> > > outb((inb(0x61) & ~0x02) | 0x01, 0x61);
> > >
> > > @@ -584,9 +586,11 @@
> > > * (interrupt on terminal count mode), binary count,
> > > * load 5 * LATCH count, (LSB and MSB) to begin countdown.
> > > */
> > > + spin_lock_irqsave(&i8253_lock, flags);
> > > outb(0xb0, 0x43); /* binary, mode 0, LSB/MSB, Ch 2 */
> > > outb(CALIBRATE_LATCH & 0xff, 0x42); /* LSB of count */
> > > outb(CALIBRATE_LATCH >> 8, 0x42); /* MSB of count */
> > > + spin_unlock_irqrestore(&i8253_lock, flags);
> > >
> > > {
> > > unsigned long startlow, starthigh;
> > > diff -Nru a/drivers/char/ftape/lowlevel/ftape-calibr.c b/drivers/char/ftape/lowlevel/ftape-calibr.c
> > > --- a/drivers/char/ftape/lowlevel/ftape-calibr.c Sun May 26 14:18:40 2002
> > > +++ b/drivers/char/ftape/lowlevel/ftape-calibr.c Sun May 26 14:18:40 2002
> > > @@ -31,7 +31,10 @@
> > > #include <asm/io.h>
> > > #if defined(__alpha__)
> > > # include <asm/hwrpb.h>
> > > -#elif defined(__i386__) || defined(__x86_64__)
> > > +#elif defined(__x86_64__)
> > > +# include <asm/msr.h>
> > > +# include <asm/timex.h>
> > > +#elif defined(__i386__)
> > > # include <linux/timex.h>
> > > #endif
> > > #include <linux/ftape.h>
> > > @@ -45,10 +48,14 @@
> > > # error Ftape is not implemented for this architecture!
> > > #endif
> > >
> > > -#if defined(__alpha__)
> > > +#if defined(__alpha__) || defined(__x86_64__)
> > > static unsigned long ps_per_cycle = 0;
> > > #endif
> > >
> > > +#if defined(__i386__)
> > > +extern spinlock_t i8253_lock;
> > > +#endif
> > > +
> > > /*
> > > * Note: On Intel PCs, the clock ticks at 100 Hz (HZ==100) which is
> > > * too slow for certain timeouts (and that clock doesn't even tick
> > > @@ -67,48 +74,58 @@
> > > {
> > > #if defined(__alpha__)
> > > unsigned long r;
> > > -
> > > asm volatile ("rpcc %0" : "=r" (r));
> > > return r;
> > > -#elif defined(__i386__) || defined(__x86_64__)
> > > +#elif defined(__x86_64__)
> > > + unsigned long r;
> > > + rdtscl(r);
> > > + return r;
> > > +#elif defined(__i386__)
> > > +
> > > +/*
> > > + * Note that there is some time between counter underflowing and jiffies
> > > + * increasing, so the code below won't always give correct output.
> > > + * -Vojtech
> > > + */
> > > +
> > > unsigned long flags;
> > > __u16 lo;
> > > __u16 hi;
> > >
> > > - save_flags(flags);
> > > - cli();
> > > + spin_lock_irqsave(&i8253_lock, flags);
> > > outb_p(0x00, 0x43); /* latch the count ASAP */
> > > lo = inb_p(0x40); /* read the latched count */
> > > lo |= inb(0x40) << 8;
> > > hi = jiffies;
> > > - restore_flags(flags);
> > > + spin_unlock_irqrestore(&i8253_lock, flags);
> > > +
> > > return ((hi + 1) * (unsigned int) LATCH) - lo; /* downcounter ! */
> > > #endif
> > > }
> > >
> > > static unsigned int short_ftape_timestamp(void)
> > > {
> > > -#if defined(__alpha__)
> > > +#if defined(__alpha__) || defined(__x86_64__)
> > > return ftape_timestamp();
> > > -#elif defined(__i386__) || defined(__x86_64__)
> > > +#elif defined(__i386__)
> > > unsigned int count;
> > > unsigned long flags;
> > > -
> > > - save_flags(flags);
> > > - cli();
> > > +
> > > + spin_lock_irqsave(&i8253_lock, flags);
> > > outb_p(0x00, 0x43); /* latch the count ASAP */
> > > count = inb_p(0x40); /* read the latched count */
> > > count |= inb(0x40) << 8;
> > > - restore_flags(flags);
> > > + spin_unlock_irqrestore(&i8253_lock, flags);
> > > +
> > > return (LATCH - count); /* normal: downcounter */
> > > #endif
> > > }
> > >
> > > static unsigned int diff(unsigned int t0, unsigned int t1)
> > > {
> > > -#if defined(__alpha__)
> > > - return (t1 <= t0) ? t1 + (1UL << 32) - t0 : t1 - t0;
> > > -#elif defined(__i386__) || defined(__x86_64__)
> > > +#if defined(__alpha__) || defined(__x86_64__)
> > > + return (t1 - t0);
> > > +#elif defined(__i386__)
> > > /*
> > > * This is tricky: to work for both short and full ftape_timestamps
> > > * we'll have to discriminate between these.
> > > @@ -122,9 +139,9 @@
> > >
> > > static unsigned int usecs(unsigned int count)
> > > {
> > > -#if defined(__alpha__)
> > > +#if defined(__alpha__) || defined(__x86_64__)
> > > return (ps_per_cycle * count) / 1000000UL;
> > > -#elif defined(__i386__) || defined(__x86_64__)
> > > +#elif defined(__i386__)
> > > return (10000 * count) / ((CLOCK_TICK_RATE + 50) / 100);
> > > #endif
> > > }
> > > @@ -153,49 +170,24 @@
> > > save_flags(flags);
> > > cli();
> > > t0 = short_ftape_timestamp();
> > > - for (i = 0; i < 1000; ++i) {
> > > + for (i = 0; i < 1000; ++i)
> > > status = inb(fdc.msr);
> > > - }
> > > t1 = short_ftape_timestamp();
> > > restore_flags(flags);
> > > +
> > > TRACE(ft_t_info, "inb() duration: %d nsec", ftape_timediff(t0, t1));
> > > TRACE_EXIT;
> > > }
> > >
> > > static void init_clock(void)
> > > {
> > > -#if defined(__i386__) || defined(__x86_64__)
> > > - unsigned int t;
> > > - int i;
> > > TRACE_FUN(ft_t_any);
> > >
> > > - /* Haven't studied on why, but there sometimes is a problem
> > > - * with the tick timer readout. The two bytes get swapped.
> > > - * This hack solves that problem by doing one extra input.
> > > - */
> > > - for (i = 0; i < 1000; ++i) {
> > > - t = short_ftape_timestamp();
> > > - if (t > LATCH) {
> > > - inb_p(0x40); /* get in sync again */
> > > - TRACE(ft_t_warn, "clock counter fixed");
> > > - break;
> > > - }
> > > - }
> > > +#if defined(__x86_64__)
> > > + ps_per_cycle = 1000000000UL / cpu_khz;
> > > #elif defined(__alpha__)
> > > -#if CONFIG_FT_ALPHA_CLOCK == 0
> > > -#error You must define and set CONFIG_FT_ALPHA_CLOCK in 'make config' !
> > > -#endif
> > > extern struct hwrpb_struct *hwrpb;
> > > - TRACE_FUN(ft_t_any);
> > > -
> > > - if (hwrpb->cycle_freq != 0) {
> > > - ps_per_cycle = (1000*1000*1000*1000UL) / hwrpb->cycle_freq;
> > > - } else {
> > > - /*
> > > - * HELP: Linux 2.0.x doesn't set cycle_freq on my noname !
> > > - */
> > > - ps_per_cycle = (1000*1000*1000*1000UL) / CONFIG_FT_ALPHA_CLOCK;
> > > - }
> > > + ps_per_cycle = (1000*1000*1000*1000UL) / hwrpb->cycle_freq;
> > > #endif
> > > TRACE_EXIT;
> > > }
> > > @@ -214,7 +206,7 @@
> > > unsigned int tc = 0;
> > > unsigned int count;
> > > unsigned int time;
> > > -#if defined(__i386__) || defined(__x86_64__)
> > > +#if defined(__i386__)
> > > unsigned int old_tc = 0;
> > > unsigned int old_count = 1;
> > > unsigned int old_time = 1;
> > > @@ -257,15 +249,14 @@
> > > tc = (1000 * time) / (count - 1);
> > > TRACE(ft_t_any, "once:%3d us,%6d times:%6d us, TC:%5d ns",
> > > usecs(once), count - 1, usecs(multiple), tc);
> > > -#if defined(__alpha__)
> > > +#if defined(__alpha__) || defined(__x86_64__)
> > > /*
> > > * Increase the calibration count exponentially until the
> > > * calibration time exceeds 100 ms.
> > > */
> > > - if (time >= 100*1000) {
> > > + if (time >= 100*1000)
> > > break;
> > > - }
> > > -#elif defined(__i386__) || defined(__x86_64__)
> > > +#elif defined(__i386__)
> > > /*
> > > * increase the count until the resulting time nears 2/HZ,
> > > * then the tc will drop sharply because we lose LATCH counts.
> > > diff -Nru a/drivers/char/vt.c b/drivers/char/vt.c
> > > --- a/drivers/char/vt.c Sun May 26 14:18:40 2002
> > > +++ b/drivers/char/vt.c Sun May 26 14:18:40 2002
> > > @@ -107,6 +107,7 @@
> > > _kd_mksound(unsigned int hz, unsigned int ticks)
> > > {
> > > static struct timer_list sound_timer = { function: kd_nosound };
> > > + extern spinlock_t i8253_lock;
> > > unsigned int count = 0;
> > > unsigned long flags;
> > >
> > > @@ -120,10 +121,12 @@
> > > /* enable counter 2 */
> > > outb_p(inb_p(0x61)|3, 0x61);
> > > /* set command for counter 2, 2 byte write */
> > > + spin_lock(&i8253_lock);
> > > outb_p(0xB6, 0x43);
> > > /* select desired HZ */
> > > outb_p(count & 0xff, 0x42);
> > > outb((count >> 8) & 0xff, 0x42);
> > > + spin_unlock(&i8253_lock);
> > >
> > > if (ticks) {
> > > sound_timer.expires = jiffies+ticks;
> > > diff -Nru a/drivers/ide/hd.c b/drivers/ide/hd.c
> > > --- a/drivers/ide/hd.c Sun May 26 14:18:40 2002
> > > +++ b/drivers/ide/hd.c Sun May 26 14:18:40 2002
> > > @@ -110,6 +110,8 @@
> > >
> > > static struct timer_list device_timer;
> > >
> > > +#define TIMEOUT_VALUE (6*HZ)
> > > +
> > > #define SET_TIMER \
> > > do { \
> > > mod_timer(&device_timer, jiffies + TIMEOUT_VALUE); \
> > > @@ -131,16 +133,16 @@
> > >
> > > unsigned long read_timer(void)
> > > {
> > > + extern spinlock_t i8253_lock;
> > > unsigned long t, flags;
> > > int i;
> > >
> > > - save_flags(flags);
> > > - cli();
> > > + spin_lock_irqsave(&i8253_lock, flags);
> > > t = jiffies * 11932;
> > > outb_p(0, 0x43);
> > > i = inb_p(0x40);
> > > i |= inb(0x40) << 8;
> > > - restore_flags(flags);
> > > + spin_unlock_irqrestore(&i8253_lock, flags);
> > > return(t - i);
> > > }
> > > #endif
> > > @@ -831,7 +833,7 @@
> > > printk("hd: unable to get major %d for hard disk\n",MAJOR_NR);
> > > return -1;
> > > }
> > > - blk_init_queue(BLK_DEFAULT_QUEUE(MAJOR_NR), DEVICE_REQUEST, &hd_lock);
> > > + blk_init_queue(BLK_DEFAULT_QUEUE(MAJOR_NR), do_hd_request, &hd_lock);
> > > blk_queue_max_sectors(BLK_DEFAULT_QUEUE(MAJOR_NR), 255);
> > > add_gendisk(&hd_gendisk);
> > > init_timer(&device_timer);
> > > diff -Nru a/drivers/input/gameport/gameport.c b/drivers/input/gameport/gameport.c
> > > --- a/drivers/input/gameport/gameport.c Sun May 26 14:18:40 2002
> > > +++ b/drivers/input/gameport/gameport.c Sun May 26 14:18:40 2002
> > > @@ -54,16 +54,36 @@
> > > static struct gameport *gameport_list;
> > > static struct gameport_dev *gameport_dev;
> > >
> > > +
> > > +#ifdef __i386__
> > > +
> > > +#define DELTA(x,y) ((y)-(x)+((y)<(x)?1193180/HZ:0))
> > > +#define GET_TIME(x) do { x = get_time_pit(); } while (0)
> > > +
> > > +static unsigned int get_time_pit(void)
> > > +{
> > > + extern spinlock_t i8253_lock;
> > > + unsigned long flags;
> > > + unsigned int count;
> > > +
> > > + spin_lock_irqsave(&i8253_lock, flags);
> > > + outb_p(0x00, 0x43);
> > > + count = inb_p(0x40);
> > > + count |= inb_p(0x40) << 8;
> > > + spin_unlock_irqrestore(&i8253_lock, flags);
> > > +
> > > + return count;
> > > +}
> > > +
> > > +#endif
> > > +
> > > /*
> > > * gameport_measure_speed() measures the gameport i/o speed.
> > > */
> > >
> > > static int gameport_measure_speed(struct gameport *gameport)
> > > {
> > > -#if defined(__i386__) || defined(__x86_64__)
> > > -
> > > -#define GET_TIME(x) do { outb(0, 0x43); x = inb(0x40); x |= inb(0x40) << 8; } while (0)
> > > -#define DELTA(x,y) ((y)-(x)+((y)<(x)?1193180L/HZ:0))
> > > +#ifdef __i386__
> > >
> > > unsigned int i, t, t1, t2, t3, tx;
> > > unsigned long flags;
> > >
> > > ===================================================================
> > >
> > > This BitKeeper patch contains the following changesets:
> > > 1.582..1.584
> > > ## Wrapped with gzip_uu ##
> > >
> > > begin 664 bkpatch17031
> > > M'XL(`*#2\#P``\U:ZW/;-A+_+/X5N,E,*R66!(!OYW%Q(K?QU6ESB=T/G<YH
> > > M(!(2&5.DRH=EM>K_?KL`)<NR99MJW3G9)F426"QV][<O\ADY+V1^V+K,OI8R
> > > MB(QGY$-6E(>M<AXG\20J>U4P[P6_P_7/60;7^U$VE?UZ=']TT4_BM"JZO&<;
> > > M,.:3*(.(7,J\.&RQGKF^4BYF\K#U^?C[\].CSX;Q^C5Y'XET(K_(DKQ^;919
> > > M?BF2L'@KRBC)TEZ9B[28RE+T@FRZ7`]=<DHY_-C,-:GM+)E#+7<9L)`Q83$9
> > > M4FYYCG5-#5F]GY;-;<JXR?VE:5F>:PP(Z]D>)Y3WJ=WG%F'>H64>VGZ7NH>4
> > > MDGM(DQ>,=*GQCOR]FWEO!.1\%HI2D@N9IS)1THVSU/B!F);K<^/3M2R-;L./
> > > M85!!C3</\/Q17,AQG,A-EGW36U+JN<XR=$3H!TQXH>W;PKY/1EN4E/0MTW*6
> > > MW'9=;C36G&7:J#F4PL>[-&<=4NLQFJ-/H;E-O7PAEX"0'O.,@DS@+X&_1IME
> > > MU*:F[8+(X;.'FO^*:#4HS)5H'<+HH4D/+><%Y2C:VAF\W7(93PB(LR@N2%"`
> > > M\QC'5Q)$&4]E48KIC$QD*G-1`CY(G))Q*6:R&X@D'N6]X(#,HQB<T5P40&,:
> > > M%T6<3H@@219<D'&6$Q$$4E\L(TEBC]NF(IWW](K3+*P22?(J36$0T"BSB82A
> > > M.9G'941BTW/Z&J1]G-8+2)!524AR651)B0PA7441KDWBH@0H`YDD4XL6BS30
> > > ME(IL7,Y%+HE(<?8LRTLU8"YF,QD2D&8E"V1*PAB]'9&2>99?B#RK8`[NID26
> > > M[Q#"J"IKOE()O@2^3V>)+&6R`#(@3\7D+,]&B9SVR%%29`=X"58JRCA)@)^I
> > > MB-,"!)>+0))VFLV1QE2FI0R!Q*TE.P=Z5U_C\3@&;>&FM@2\%H>6-%`)1)IF
> > > M)1E)I>*02%'$R:)'3D51ZCW@[42J?]56@RR%[92%7AVUL[**@H`Y7'G.T+%`
> > > M9:0J)#G[\KY>N<@2V#J0E('`.W'Y+;"8S,4"V9B![F!CM0"0\S"31?IM22)Q
> > > M"1=`'AOB*O1&MZT'Z,#OCR"G6HX1BA^)C)#F`E@/Y6[K4T2SJD0MDV(6I\I@
> > > M(YF$/?)=G`(/BW^I:.`[SC\0#<(\QA#4#R*1]Y6L^TDV3\"6DOY-Q6\@VJ+4
> > > M7E)F.G3)`\N2PN:!,^+AV'5V^8_&"]G<H9Y)+0O"B<<MP]A%^):_T_.<I1:A
> > > M]G?6AK^S#IE[:-&'_)WSM/Y.342G%V4S.:Y`[;7[6UDAH+(4*5@1:8L:&VCY
> > > MZ)?0=G+P?6C!^*6;9FDQDT$\C@-2"[H#_A'-LUP=:R,,HGA&%"BUB0(:NRL<
> > > M;1@D7(%,,@:5_*YG3\'IQ=W1HES9-OBLU68T!)!S0$55*')I"$R4*^^@37\-
> > > MK#*"+8%+!`(1>D'TP`1=3ST^!2R5Z$`0";;CTW\0"7$H^U&X9>_,7IH<+&L9
> > > MFBSDWL@-'#EVY"A\T-YOD@/K9)RYU%HZ0-M[D"G4;G\S%*$2_2WF.%O:ONM[
> > > MRW'@^Z[CP46(^6-F[63N?K+73,(2_&')W:(F9M/;+#K,\<!?V+YCFX('H<U-
> > > M$.'C6=P@>LT@A3S*;^;D+LMM7P;*,!D%(3J.8XX%LP4H7)@[?<,N>M=L6=SB
> > > M9G.YZ3SCEFYMZH`J@*-1Z'-K#+=<]_%RVR1ZS:');/]A\[NQT:_9`G*&X*(_
> > > M$5.5Q=R."8R"]2UMX4CP$4P$KLD\_V&(I+.J7%.]17[#'!V(.:K@7)4>#]>;
> > > MC<H=XT+$;\L9Z^55E'>K%!Q>%D35M!?*6]6.Q3GW.575#E-A!BYLUYJ6\\A:
> > > MD_VCM::NT'XBW7RN?L%'?EK+=`__.C`),T[P\.7\W>GQS\>GY#5(0*GJ;B`_
> > > MK+B_XE7NT^/]CL4$:3K@[1UNLUJK]G;N0*U'Y`[^DRCT*,1$7X80M3%,JY)'
> > > M%PFYC-.X5`'[9M:)`1\C]6<YS2#)K4*9B$6;T0Y4`&`<F.E#TH$Q.2M6V2Q0
> > > MPT04,UI(S&%RO6:78"FBJR$,U1EF%Y`GKS)@+%J(C/&J#MW^MI'=+?T]3.Z$
> > > M,9>#P;7D%20*Z3IS&99ZWT/\YZ4Q@&$6X6JXC<-QG+HWC//?"DC[V]]<CS\@
> > > MXT1,BHZ>YQ(7YT&Q;!DM2-E'PUF;7IG6`:%7EMEYV6KUGY,1Y.PY5!Q3S/KY
> > > M`3G]\J[_\<N[`Y`[H>1Y?SWS].CL_0?R#<P=CQ4%"A2``$RX/>S-&^)M#OI8
> > > M#U+<5^F*?ZAGP,9V;.%.\-6!?@_X-<H\&@%P*_DP.3--;BZI1QU?09#QYA"T
> > > MGBI]1PAN80^1=QMX.N>-H9#.\VI6KK/EJ5B0NAH6(RA8*ZS6:X0=:"1BRH[)
> > > MLAC!G1@K5-446&2I)#(II$Z@==VOL_&-=84J<$D!853Q<`!S59M`J$JW@LB*
> > > M(4"E=@^ALU;-/O@T'0ZX>P">K2HMXDFJW!D(3YGN2^/$8FX#K)Y8G*Z'_Q5P
> > > MU)ZM.38:)&Z-D'$S=UL!@W-F6QH8]/\;&*M*$2M";9QQ2G2=#Z%G6!9!NX.X
> > > M.)J(.*T[/QOP*,H\#LH-<*`9JY:.+@]5TP[#V`(K8VWT8SA`S06A:BXU+9B+
> > > MPP)=6,,*XRH-L*D(T^4EU)H`F+Q*4=:K\`=3U]TTF1:80V$33A7MN+WWG\YA
> > > M,I3<,E1Q3B73#V%)*W,?*-FN@U"Z$RN_PFW/:8(6&U+R/=#R^`;.PP#ZN[M.
> > > M1EX5Y>(M'H,LG^$:/5'MT7/B#(!*G:7E4:X?(%FW.N4/(PP@9IM/@K'OL*.[
> > > M[H\#@3!!>T3CK%NBF):AU2D?KSIG6W;Y>*'L50A8JA*P(&5Z)I-X3$*H*<!F
> > > MV\.A9G`X[!C/P`T$"62BY)4HIOUID?>B-]M7<9M7ZOH6'=P=4"'&P/)P,75\
> > > M=F.(2&:1P#'+Y9T,G-@,&;R+K'%_P'HFTS`>`^H&+L:<@:LJ'SSR>S:\!=T<
> > > M`E\>@O=+VGD'O\NR@B7SE[OV"NOUGQOD.?DQ*^O@KY,$;+YE=9Q'ISB7X,\@
> > > M+\"D0_?@QJ!<Y9'!+NJ>/1("4>?8A4\G!T!!^4[5MQY)[.'-,TP5=-^<3,!>
> > > MX&:>RZ`DD*5"L=Y#$MV?ZZ?,F)FB0#S,LUW_\;X(5.@I>_$P16_BD0@NZ#.<
> > > MJX[-U#_PE=;4<9?$![Y#3!B#FVHUV!"C6)6<X&F/+3'JXZJ,,3@UV]3*BMHE
> > > MPXXN%`Z[]\:XK9A4IX:R8]S5<]W[I,=L1XU2IQ;ZIW9,7A/ZDL3D%7A2"M]>
> > > MO(C52(5B<'IP0A$X+NQ]H*H[K-N@_.);/&YL>E8,9S(?!HL`FT&*L/Z<GY(^
> > > M"6;5\"+Z'<LYSU94,?91H.KCHMNSVSC]^<W#^6D'"$7S?#;JOE$#A^-<_@8D
> > > MN4I23_3I;E\RX&I7)_K44-#<L?5<5;>V8');P?R-VJ9B3HUR$7;<\>Y1QV;\
> > > MWMEM:QBV]VT'KA_D%%4A&[0!.7<X`T&R);6H9:O@[#9/?SD$9^O)\]\Y/L/8
> > > M_00:8[/J9>Z(S3M%L5?V",FC"<@"\P/+("NKP"O:4LC@^/3LJ'UUL.@0]6FW
> > > M%YUN^ZKS`K^\@B__9LP'W='^AU\.::>SGOC]\=GP[.3C,0Q1$\.,_$&N`$D3
> > > M60YQJ\-97+;!M_V)3^L!8VV*L0P;3W%`UD$1:N2;,RZS..P8?^Q7/;9NT%7!
> > > M$-/DQ^;'UYT>2E>='J.ER,#&XE3?P\;,ZNKRQF7RZA7Q7C;+KW]=>^^:W3]1
> > > M.^M4P\$.U(GC:!]R0XFW,O/+YDA^_!,1(\JB[.T(=BN*J)<"/'8]"J$N`(;;
> > > M%-\Z,?5;)Q#3&J/5?,IB]>Y&ZJV:M4>.L4K$I_83]3H`OM"`N5(8%V*4R.*Z
> > > MQP/)4I*-L'5Z4+]?L;ZEIP0"'VUBX7DE@TJ]!P*5JVJC8E&Y>IVB*C:>FFZ1
> > > M@)H6&SJ;KQCLZ/O4KZJH$>"-=.%P@=W@'XA^0G5?:7"YI[O!%(89I/[<#V#(
> > > M(OC&X&N(;L*DH\8YM\9I;&V-O!'IZD>OCX=#LV>_1B@2";;S5E[&^&"E"V8"
> > > M();%/32QQ/0XAQ+3-BVO;F_N$<:<IXIB6&$JH6'+))O.T&L+;,_HMPWNC7'X
> > > MOM#-**>?<N^*<K5D]NO^8WZ]BD,8@WXZ/QO^?'1Z?MQJ.\\__()QYH29YJ-M
> > > M<<!,E4DQTVOTG,!2M80^-7+Z`T\7R_K4&B4P)8W+X6^5K&3[W>D/P\'Q=T?G
> > > MIV?#_YX?GQ^W/Q[]YZ?/PQ\_=PX@S@ZC<`AI:"7QC:EOX)^5_:]>T@TB,,VB
> > > 3FK[V>!@X^#KL_P!<D_!-'2P`````
> > > `
> > > end
> > >
> > > --
> > > Vojtech Pavlik
> > > SuSE Labs
> > > -
> > > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> > > the body of a message to majordomo@vger.kernel.org
> > > More majordomo info at http://vger.kernel.org/majordomo-info.html
> > > Please read the FAQ at http://www.tux.org/lkml/
>
> --
> Vojtech Pavlik
> SuSE Labs
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/