Hi all
Thanks Alan's advice, here is a patch that aims at fixing the mem.
corruption problems encountered by some users, when trying to use
agpgart with intel 815 chipsets.
The patch is against 2.4.19-pre8-ac5
Alessandro, could you please test whether this patch improves things or
not ?
Best regards
-- Nicolas Aspert Signal Processing Institute (ITS) Swiss Federal Institute of Technology (EPFL)
--------------090403000903080703030605 Content-Type: text/plain; name="patch-intel_815-2.4.19-pre8-ac5" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="patch-intel_815-2.4.19-pre8-ac5"
Only in agp: Makefile diff -u agp.orig/agp.h agp/agp.h --- agp.orig/agp.h Fri May 24 15:08:37 2002 +++ agp/agp.h Mon May 27 11:26:55 2002 @@ -293,6 +293,10 @@ /* This one is for I830MP w. an external graphic card */ #define INTEL_I830_ERRSTS 0x92 +/* intel 815 register */ +#define INTEL_815_APCONT 0x51 +#define INTEL_815_ATTBASE_MASK 0x1FFFFFFF + /* intel i820 registers */ #define INTEL_I820_RDCR 0x51 #define INTEL_I820_ERRSTS 0xc8 diff -u agp.orig/agpgart_be.c agp/agpgart_be.c --- agp.orig/agpgart_be.c Fri May 24 15:08:44 2002 +++ agp/agpgart_be.c Mon May 27 11:28:07 2002 @@ -1490,6 +1490,42 @@ return 0; } +static int intel_815_configure(void) +{ + u32 temp, addr; + u8 temp2; + aper_size_info_8 *current_size; + + current_size = A_SIZE_8(agp_bridge.current_size); + + /* aperture size */ + pci_write_config_byte(agp_bridge.dev, INTEL_APSIZE, + current_size->size_value); + + /* address to map to */ + pci_read_config_dword(agp_bridge.dev, INTEL_APBASE, &temp); + agp_bridge.gart_bus_addr = (temp & PCI_BASE_ADDRESS_MEM_MASK); + + /* attbase - aperture base */ + /* the Intel 815 chipset spec. says that bits 29-31 in the + * ATTBASE register are reserved -> try not to write them */ + if (agp_bridge.gatt_bus_addr & (~ INTEL_815_ATTBASE_MASK)) + panic("gatt bus addr too high"); + addr = agp_bridge.gatt_bus_addr & INTEL_815_ATTBASE_MASK; + pci_write_config_dword(agp_bridge.dev, INTEL_ATTBASE, &addr); + + /* agpctrl */ + pci_write_config_dword(agp_bridge.dev, INTEL_AGPCTRL, 0x0000); + + /* apcont */ + pci_read_config_byte(agp_bridge.dev, INTEL_I815_APCONT, &temp2); + pci_write_config_byte(agp_bridge.dev, INTEL_I815_APCONT, + temp2 | (1 << 1)); + /* clear any possible error conditions */ + /* Oddness : this chipset seems to have no ERRSTS register ! */ + return 0; +} + static void intel_820_tlbflush(agp_memory * mem) { return; @@ -1724,6 +1760,12 @@ {0x00000017, 0} }; +static aper_size_info_8 intel_815_sizes[2] = +{ + {64, 16384, 4, 0}, + {32, 8192, 3, 8}, +}; + static aper_size_info_8 intel_8xx_sizes[7] = { {256, 65536, 6, 0}, @@ -1787,7 +1829,38 @@ (void) pdev; /* unused */ } +static int __init intel_815_setup (struct pci_dev *pdev) +{ + agp_bridge.masks = intel_generic_masks; + agp_bridge.num_of_masks = 1; + agp_bridge.aperture_sizes = (void *) intel_815_sizes; + agp_bridge.size_type = U8_APER_SIZE; + agp_bridge.num_aperture_sizes = 2; + agp_bridge.dev_private_data = NULL; + agp_bridge.needs_scratch_page = FALSE; + agp_bridge.configure = intel_815_configure; + agp_bridge.fetch_size = intel_8xx_fetch_size; + agp_bridge.cleanup = intel_8xx_cleanup; + agp_bridge.tlb_flush = intel_8xx_tlbflush; + agp_bridge.mask_memory = intel_mask_memory; + agp_bridge.agp_enable = agp_generic_agp_enable; + agp_bridge.cache_flush = global_cache_flush; + agp_bridge.create_gatt_table = agp_generic_create_gatt_table; + agp_bridge.free_gatt_table = agp_generic_free_gatt_table; + agp_bridge.insert_memory = agp_generic_insert_memory; + agp_bridge.remove_memory = agp_generic_remove_memory; + agp_bridge.alloc_by_type = agp_generic_alloc_by_type; + agp_bridge.free_by_type = agp_generic_free_by_type; + agp_bridge.agp_alloc_page = agp_generic_alloc_page; + agp_bridge.agp_destroy_page = agp_generic_destroy_page; + agp_bridge.suspend = agp_generic_suspend; + agp_bridge.resume = agp_generic_resume; + agp_bridge.cant_use_aperture = 0; + return 0; + + (void) pdev; /* unused */ +} static int __init intel_820_setup (struct pci_dev *pdev) { @@ -3929,7 +4002,7 @@ INTEL_I815, "Intel", "i815", - intel_generic_setup }, + intel_815_setup }, { PCI_DEVICE_ID_INTEL_820_0, PCI_VENDOR_ID_INTEL, INTEL_I820, Only in agp: agpgart_fe.c
--------------090403000903080703030605--
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/