Re: [PATCH] 2.5.18 ide-scsi compile fix

[Sebastian Droege]

--=.0n0djRBG::0Udm
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: 7bit

On Sat, 25 May 2002 17:17:25 +0200
Gert Vervoort <[e-mail]> wrote:

> > --- ide-scsi.c.1        Sat May 25 14:21:28 2002
> > +++ ide-scsi.c  Sat May 25 14:21:37 2002
> > @@ -804,7 +804,7 @@
> >  };
> > 
> > 
> > -static int __init idescsi_init(void)
> > +int __init idescsi_init(void)
> >  {
> >         int ret;
> >         ret = ata_driver_module(&idescsi_driver);
> 
> This does not boot, as idescsi_init seems is also called by the scsi subsystem.
> The following patch actually boots on my system:
> 
> --- ide.c.1     Sat May 25 16:22:54 2002
> +++ ide.c       Sat May 25 16:23:22 2002
> @@ -3444,9 +3444,7 @@
>         idefloppy_init();
>  #endif
>  #ifdef CONFIG_BLK_DEV_IDESCSI
> -# ifdef CONFIG_SCSI
> -       idescsi_init();
> -# else
> +# ifndef CONFIG_SCSI
>     #error ATA SCSI emulation selected but no SCSI-subsystem in kernel
>  # endif
>  #endif
This patch does not work too....
Only one ide-scsi device will get detected

BTW: why do I get an oops (reported 2 or 3 times but no answers) when mounting cdroms since 2.5.7 or something?

cat /proc/cmdline 
BOOT_IMAGE=2.5.18 rw root=301 hdc=scsi hdd=scsi

[...]
ATA/ATAPI device driver v7.0.0
ATA: PCI bus speed 33.3MHz
ATA: Intel Corp. 82371AB PIIX4 IDE, PCI slot 00:07.1
ATA: chipset rev.: 1
ATA: non-legacy mode: IRQ probe delayed
PIIX: Intel Corp. 82371AB PIIX4 IDE UDMA33 controller on pci00:07.1
    ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
    ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
hda: IBM-DTTA-351010, ATA DISK drive
hdb: WDC WD800BB-00BSA0, ATA DISK drive
hdc: CD-W512EB, ATAPI CD/DVD-ROM drive
hdd: CD-532E-B, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
[...]
SCSI subsystem driver Revision: 1.00
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
  Vendor: TEAC      Model: CD-W512EB         Rev: 2.0E
  Type:   CD-ROM                             ANSI SCSI revision: 02
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
sr0: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.12
--=.0n0djRBG::0Udm
Content-Type: application/pgp-signature

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.0.7 (GNU/Linux)

iD8DBQE88Mwle9FFpVVDScsRAkmFAKDkPhvwrgKOxKn7u4JPZVGGb3U5JACg7Dc5
o+V2KoP1Qgp9+JRVicb2TRs=
=6tFL
-----END PGP SIGNATURE-----

--=.0n0djRBG::0Udm--