It creates the interfaces, but they show totally bogus counters.
(there is no ethernet activity, or not supposed to be any)
MAC looks bogus too.
Any suggestions are welcome!
Thanks,
Ben
eth5 Link encap:Ethernet HWaddr 6F:EF:6F:EF:6F:EF
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:123555840 errors:0 dropped:480629 overruns:0 frame:0
TX packets:131444993 errors:0 dropped:0 overruns:0 carrier:0
collisions:965280 txqueuelen:100
RX bytes:1473161754 (1404.9 Mb) TX bytes:1473622273 (1405.3 Mb)
Interrupt:11 Base address:0x8000
[root@localhost root]# mii-tool -vv eth5
eth5: 10 Mbit, half duplex, no link
registers for MII PHY 1:
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
product info: vendor 00:00:00, model 0 rev 0
basic mode: 10 Mbit, half duplex
basic status: no link
capabilities:
advertising:
sundance.c:v1.01b 17-Jan-2002 Written by Donald Becker
http://www.scyld.com/network/sundance.html
eth5: D-Link DFE-580TX 4 port Server Adapter at 0xce8a8000, 6f:ef:6f:ef:6f:ef, IRQ 11.
eth5: No MII transceiver found!, ASIC status f000ef6f
eth6: D-Link DFE-580TX 4 port Server Adapter at 0xce8aa000, 6f:ef:6f:ef:6f:ef, IRQ 7.
eth6: No MII transceiver found!, ASIC status 7fef6f
eth7: D-Link DFE-580TX 4 port Server Adapter at 0xce8ac000, 6f:ef:6f:ef:6f:ef, IRQ 5.
eth7: No MII transceiver found!, ASIC status 7fef6f
eth8: D-Link DFE-580TX 4 port Server Adapter at 0xce8ae000, 6f:ef:6f:ef:6f:ef, IRQ 10.
eth8: No MII transceiver found!, ASIC status 7fef6f
-- Ben Greear <greearb@candelatech.com> <Ben_Greear AT excite.com> President of Candela Technologies Inc http://www.candelatech.com ScryMUD: http://scry.wanfear.com http://scry.wanfear.com/~greear
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/