Hardware, IDE or ext3 problem?

[ULISSES FURQUIM FREIRE DA SILVA]

Hi,

	I installed Red Hat 7.3 and the 2.4.18-3 kernel shows some IDE
errors on boot like:

VFS: Mounted root (ext2 filesystem).
Journalled Block Device driver loaded
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
ide0: reset: success
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.

	I also tried the 2.4.18-4 kernel, but the errors continue. It's
weird cause this happen only on boot and in spite of it the system runs
fine.
	I have a SiS 5513 chipset with a QUANTUM FIREBALLlct15 20 IDE
drive.
	I'm not sure if I have a true hardware problem or if there is a
bug in the kernel. Any ideas?
	(please CC the answers to me)

Thanks,

-- Ulisses