Re: 3com 3c905cx-tx-nm "unknown device"

[Muli Ben-Yehuda]

On Sat, May 11, 2002 at 01:07:53AM -0700, Andrew Morton wrote:
> Muli Ben-Yehuda wrote:
> > lspci -vx (with the latest pci.ids file) shows:
> > 
> > 00:09.0 Ethernet controller: 3Com Corporation: Unknown device ffff (rev 78)
> >      Flags: bus master, medium devsel, latency 64, IRQ 11
> >      I/O ports at 6500 [size=128]
> >      Expansion ROM at <unassigned> [disabled] [size=128K]
> >      Capabilities: [dc] Power Management version 2
> > 00: b7 10 ff ff 07 00 10 02 78 00 00 02 08 40 00 00
> > 10: 01 65 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > 20: 00 00 00 00 00 00 00 00 00 00 00 00 ff ff ff ff
> > 30: 00 00 00 00 dc 00 00 00 00 00 00 00 0b 01 1e 3f
> 
> PCI IDs are 0xffff.  Normally that is supplied from the EEPROM (we think).
> 
> Try setting the NIC up with 3com's DOS-based setup program 
> ftp://ftp.3com.com/pub/nic/3c90x/3c90xx2.exe and also check your
> BIOS power management settings, PnP OS settings, etc.

The BIOS setting have all been tweaked to death, with no apparent
change. I tried the setup program on windows 95, and it failed to
detect the card as well. 

> Try to work out why the EEPROM hasn't been powered up - could be
> a dead card (test it under Windows) or a BIOS thing.

I'll try to test the card on a different computer running a reasonably
recent version of windows, and I'll try to get another unit of the
same card to try with linux. I'll inform the list of any conclustions.
Thanks!
-- 
The ill-formed Orange
Fails to satisfy the eye:       http://vipe.technion.ac.il/~mulix/
Segmentation fault.             http://syscalltrack.sf.net/