Ivan.
PS. These patches are completely independent to PCI reorg suggested
by Greg KH. The only conflict would be in arch/i386/kernel/pci-i386.c
(pcibios_align_resource) due to changed location of this file.
--- 2.5.14/arch/alpha/kernel/pci.c Sun May 5 18:40:21 2002
+++ linux/arch/alpha/kernel/pci.c Sun May 5 18:40:35 2002
@@ -246,25 +246,6 @@ pcibios_fixup_bus(struct pci_bus *bus)
/* Root bus */
bus->resource[0] = hose->io_space;
bus->resource[1] = hose->mem_space;
- } else {
- /* This is a bridge. Do not care how it's initialized,
- just link its resources to the bus ones */
- int i;
-
- for(i=0; i<3; i++) {
- bus->resource[i] =
- &dev->resource[PCI_BRIDGE_RESOURCES+i];
- bus->resource[i]->name = bus->name;
- }
- bus->resource[0]->flags |= pci_bridge_check_io(dev);
- bus->resource[1]->flags |= IORESOURCE_MEM;
- /* For now, propogate hose limits to the bus;
- we'll adjust them later. */
- bus->resource[0]->end = hose->io_space->end;
- bus->resource[1]->end = hose->mem_space->end;
- /* Turn off downstream PF memory address range by default */
- bus->resource[2]->start = 1024*1024;
- bus->resource[2]->end = bus->resource[2]->start - 1;
}
for (ln = bus->devices.next; ln != &bus->devices; ln = ln->next) {
@@ -349,6 +330,10 @@ pcibios_fixup_pbus_ranges(struct pci_bus
ranges->io_end -= hose->io_space->start;
ranges->mem_start -= hose->mem_space->start;
ranges->mem_end -= hose->mem_space->start;
+/* FIXME: On older alphas we could use dense memory space
+ to access prefetchable resources. */
+ ranges->prefetch_start -= hose->mem_space->start;
+ ranges->prefetch_end -= hose->mem_space->start;
}
int
--- 2.5.14/arch/arm/kernel/bios32.c Sun May 5 18:40:21 2002
+++ linux/arch/arm/kernel/bios32.c Sun May 5 18:40:35 2002
@@ -346,20 +346,7 @@ pbus_assign_bus_resources(struct pci_bus
struct pci_dev *dev = bus->self;
int i;
- if (dev) {
- for (i = 0; i < 3; i++) {
- if (root->resource[i]) {
- bus->resource[i] = &dev->resource[PCI_BRIDGE_RESOURCES+i];
- bus->resource[i]->end = root->resource[i]->end;
- bus->resource[i]->name = bus->name;
- }
- }
- bus->resource[0]->flags |= pci_bridge_check_io(dev);
- bus->resource[1]->flags |= IORESOURCE_MEM;
-
- if (bus->resource[2] && root->resource[2])
- bus->resource[2]->flags = root->resource[2]->flags;
- } else {
+ if (!dev) {
/*
* Assign root bus resources.
*/
--- 2.5.14/include/linux/pci.h Sun May 5 18:40:21 2002
+++ linux/include/linux/pci.h Mon May 6 13:46:28 2002
@@ -464,9 +464,9 @@ struct pci_ops {
struct pbus_set_ranges_data
{
- int found_vga;
unsigned long io_start, io_end;
unsigned long mem_start, mem_end;
+ unsigned long prefetch_start, prefetch_end;
};
struct pci_device_id {
@@ -583,8 +583,7 @@ int pci_enable_wake(struct pci_dev *dev,
int pci_claim_resource(struct pci_dev *, int);
void pci_assign_unassigned_resources(void);
void pdev_enable_device(struct pci_dev *);
-void pdev_sort_resources(struct pci_dev *, struct resource_list *, u32);
-unsigned long pci_bridge_check_io(struct pci_dev *);
+void pdev_sort_resources(struct pci_dev *, struct resource_list *);
void pci_fixup_irqs(u8 (*)(struct pci_dev *, u8 *),
int (*)(struct pci_dev *, u8, u8));
#define HAVE_PCI_REQ_REGIONS
--- 2.5.14/drivers/pci/setup-bus.c Fri May 3 04:22:51 2002
+++ linux/drivers/pci/setup-bus.c Mon May 6 13:56:42 2002
@@ -11,7 +11,10 @@
/*
* Nov 2000, Ivan Kokshaysky <ink@jurassic.park.msu.ru>
- * PCI-PCI bridges cleanup, sorted resource allocation
+ * PCI-PCI bridges cleanup, sorted resource allocation.
+ * Feb 2002, Ivan Kokshaysky <ink@jurassic.park.msu.ru>
+ * Converted to allocation in 3 passes, which gives
+ * tighter packing. Prefetchable range support.
*/
#include <linux/init.h>
@@ -23,7 +26,7 @@
#include <linux/slab.h>
-#define DEBUG_CONFIG 0
+#define DEBUG_CONFIG 1
#if DEBUG_CONFIG
# define DBGC(args) printk args
#else
@@ -33,16 +36,14 @@
#define ROUND_UP(x, a) (((x) + (a) - 1) & ~((a) - 1))
static int __init
-pbus_assign_resources_sorted(struct pci_bus *bus,
- struct pbus_set_ranges_data *ranges)
+pbus_assign_resources_sorted(struct pci_bus *bus)
{
struct list_head *ln;
struct resource *res;
- struct resource_list head_io, head_mem, *list, *tmp;
- unsigned long io_reserved = 0, mem_reserved = 0;
+ struct resource_list head, *list, *tmp;
int idx, found_vga = 0;
- head_io.next = head_mem.next = NULL;
+ head.next = NULL;
for (ln=bus->devices.next; ln != &bus->devices; ln=ln->next) {
struct pci_dev *dev = pci_dev_b(ln);
u16 class = dev->class >> 8;
@@ -64,63 +65,26 @@ pbus_assign_resources_sorted(struct pci_
pci_write_config_word(dev, PCI_COMMAND, cmd);
}
- /* Reserve some resources for CardBus.
- Are these values reasonable? */
- if (class == PCI_CLASS_BRIDGE_CARDBUS) {
- io_reserved += 8*1024;
- mem_reserved += 32*1024*1024;
- continue;
- }
-
- pdev_sort_resources(dev, &head_io, IORESOURCE_IO);
- pdev_sort_resources(dev, &head_mem, IORESOURCE_MEM);
+ pdev_sort_resources(dev, &head);
}
- for (list = head_io.next; list;) {
+ for (list = head.next; list;) {
res = list->res;
idx = res - &list->dev->resource[0];
- if (pci_assign_resource(list->dev, idx) == 0
- && ranges->io_end < res->end)
- ranges->io_end = res->end;
+ pci_assign_resource(list->dev, idx);
tmp = list;
list = list->next;
kfree(tmp);
}
- for (list = head_mem.next; list;) {
- res = list->res;
- idx = res - &list->dev->resource[0];
- if (pci_assign_resource(list->dev, idx) == 0
- && ranges->mem_end < res->end)
- ranges->mem_end = res->end;
- tmp = list;
- list = list->next;
- kfree(tmp);
- }
-
- ranges->io_end += io_reserved;
- ranges->mem_end += mem_reserved;
-
- /* PCI-to-PCI Bridge Architecture Specification rev. 1.1 (1998)
- requires that if there is no I/O ports or memory behind the
- bridge, corresponding range must be turned off by writing base
- value greater than limit to the bridge's base/limit registers. */
-#if 1
- /* But assuming that some hardware designed before 1998 might
- not support this (very unlikely - at least all DEC bridges
- are ok and I believe that was standard de-facto. -ink), we
- must allow for at least one unit. */
- if (ranges->io_end == ranges->io_start)
- ranges->io_end += 1;
- if (ranges->mem_end == ranges->mem_start)
- ranges->mem_end += 1;
-#endif
- ranges->io_end = ROUND_UP(ranges->io_end, 4*1024);
- ranges->mem_end = ROUND_UP(ranges->mem_end, 1024*1024);
return found_vga;
}
-/* Initialize bridges with base/limit values we have collected */
+/* Initialize bridges with base/limit values we have collected.
+ PCI-to-PCI Bridge Architecture Specification rev. 1.1 (1998)
+ requires that if there is no I/O ports or memory behind the
+ bridge, corresponding range must be turned off by writing base
+ value greater than limit to the bridge's base/limit registers. */
static void __init
pci_setup_bridge(struct pci_bus *bus)
{
@@ -130,120 +94,311 @@ pci_setup_bridge(struct pci_bus *bus)
if (!bridge || (bridge->class >> 8) != PCI_CLASS_BRIDGE_PCI)
return;
+
ranges.io_start = bus->resource[0]->start;
ranges.io_end = bus->resource[0]->end;
ranges.mem_start = bus->resource[1]->start;
ranges.mem_end = bus->resource[1]->end;
+ ranges.prefetch_start = bus->resource[2]->start;
+ ranges.prefetch_end = bus->resource[2]->end;
pcibios_fixup_pbus_ranges(bus, &ranges);
- DBGC((KERN_ERR "PCI: Bus %d, bridge: %s\n", bus->number, bridge->name));
- DBGC((KERN_ERR " IO window: %04lx-%04lx\n", ranges.io_start, ranges.io_end));
- DBGC((KERN_ERR " MEM window: %08lx-%08lx\n", ranges.mem_start, ranges.mem_end));
+ DBGC((KERN_INFO "PCI: Bus %d, bridge: %s\n",
+ bus->number, bridge->name));
/* Set up the top and bottom of the PCI I/O segment for this bus. */
- pci_read_config_dword(bridge, PCI_IO_BASE, &l);
- l &= 0xffff0000;
- l |= (ranges.io_start >> 8) & 0x00f0;
- l |= ranges.io_end & 0xf000;
+ if (bus->resource[0]->flags & IORESOURCE_IO) {
+ pci_read_config_dword(bridge, PCI_IO_BASE, &l);
+ l &= 0xffff0000;
+ l |= (ranges.io_start >> 8) & 0x00f0;
+ l |= ranges.io_end & 0xf000;
+ /* Set up upper 16 bits of I/O base/limit. */
+ pci_write_config_word(bridge, PCI_IO_BASE_UPPER16,
+ ranges.io_start >> 16);
+ pci_write_config_word(bridge, PCI_IO_LIMIT_UPPER16,
+ ranges.io_end >> 16);
+ DBGC((KERN_INFO " IO window: %04lx-%04lx\n",
+ ranges.io_start, ranges.io_end));
+ }
+ else {
+ /* Clear upper 16 bits of I/O base/limit. */
+ pci_write_config_dword(bridge, PCI_IO_BASE_UPPER16, 0);
+ l = 0x00f0;
+ DBGC((KERN_INFO " IO window: disabled.\n"));
+ }
pci_write_config_dword(bridge, PCI_IO_BASE, l);
- /* Clear upper 16 bits of I/O base/limit. */
- pci_write_config_dword(bridge, PCI_IO_BASE_UPPER16, 0);
+ /* Set up the top and bottom of the PCI Memory segment
+ for this bus. */
+ if (bus->resource[1]->flags & IORESOURCE_MEM) {
+ l = (ranges.mem_start >> 16) & 0xfff0;
+ l |= ranges.mem_end & 0xfff00000;
+ DBGC((KERN_INFO " MEM window: %08lx-%08lx\n",
+ ranges.mem_start, ranges.mem_end));
+ }
+ else {
+ l = 0x0000fff0;
+ DBGC((KERN_INFO " MEM window: disabled.\n"));
+ }
+ pci_write_config_dword(bridge, PCI_MEMORY_BASE, l);
/* Clear out the upper 32 bits of PREF base/limit. */
pci_write_config_dword(bridge, PCI_PREF_BASE_UPPER32, 0);
pci_write_config_dword(bridge, PCI_PREF_LIMIT_UPPER32, 0);
- /* Set up the top and bottom of the PCI Memory segment
- for this bus. */
- l = (ranges.mem_start >> 16) & 0xfff0;
- l |= ranges.mem_end & 0xfff00000;
- pci_write_config_dword(bridge, PCI_MEMORY_BASE, l);
-
/* Set up PREF base/limit. */
- l = (bus->resource[2]->start >> 16) & 0xfff0;
- l |= bus->resource[2]->end & 0xfff00000;
+ if (bus->resource[2]->flags & IORESOURCE_PREFETCH) {
+ l = (ranges.prefetch_start >> 16) & 0xfff0;
+ l |= ranges.prefetch_end & 0xfff00000;
+ DBGC((KERN_INFO " PREFETCH window: %08lx-%08lx\n",
+ ranges.prefetch_start, ranges.prefetch_end));
+ }
+ else {
+ l = 0x0000fff0;
+ DBGC((KERN_INFO " PREFETCH window: disabled.\n"));
+ }
pci_write_config_dword(bridge, PCI_PREF_MEMORY_BASE, l);
/* Check if we have VGA behind the bridge.
- Enable ISA in either case. */
+ Enable ISA in either case (FIXME!). */
l = (bus->resource[0]->flags & IORESOURCE_BUS_HAS_VGA) ? 0x0c : 0x04;
pci_write_config_word(bridge, PCI_BRIDGE_CONTROL, l);
}
+/* Check whether the bridge supports optional I/O and
+ prefetchable memory ranges. If not, the respective
+ base/limit registers must be read-only and read as 0. */
static void __init
-pbus_assign_resources(struct pci_bus *bus, struct pbus_set_ranges_data *ranges)
+pci_bridge_check_ranges(struct pci_bus *bus)
+{
+ u16 io;
+ u32 pmem;
+ struct pci_dev *bridge = bus->self;
+ struct resource *b_res;
+
+ if (!bridge || (bridge->class >> 8) != PCI_CLASS_BRIDGE_PCI)
+ return;
+
+ b_res = &bridge->resource[PCI_BRIDGE_RESOURCES];
+ b_res[1].flags |= IORESOURCE_MEM;
+
+ pci_read_config_word(bridge, PCI_IO_BASE, &io);
+ if (!io) {
+ pci_write_config_word(bridge, PCI_IO_BASE, 0xf0f0);
+ pci_read_config_word(bridge, PCI_IO_BASE, &io);
+ pci_write_config_word(bridge, PCI_IO_BASE, 0x0);
+ }
+ if (io)
+ b_res[0].flags |= IORESOURCE_IO;
+ /* DECchip 21050 pass 2 errata: the bridge may miss an address
+ disconnect boundary by one PCI data phase.
+ Workaround: do not use prefetching on this device. */
+ if (bridge->vendor == PCI_VENDOR_ID_DEC && bridge->device == 0x0001)
+ return;
+ pci_read_config_dword(bridge, PCI_PREF_MEMORY_BASE, &pmem);
+ if (!pmem) {
+ pci_write_config_dword(bridge, PCI_PREF_MEMORY_BASE,
+ 0xfff0fff0);
+ pci_read_config_dword(bridge, PCI_PREF_MEMORY_BASE, &pmem);
+ pci_write_config_dword(bridge, PCI_PREF_MEMORY_BASE, 0x0);
+ }
+ if (pmem)
+ b_res[2].flags |= IORESOURCE_MEM | IORESOURCE_PREFETCH;
+}
+
+/* Sizing the IO windows of the PCI-PCI bridge is trivial,
+ since these windows have 4K granularity and the IO ranges
+ of non-bridge PCI devices are limited to 256 bytes.
+ We must be careful with the ISA aliasing though. */
+static void __init
+pbus_size_io(struct pci_bus *bus)
{
struct list_head *ln;
- int found_vga = pbus_assign_resources_sorted(bus, ranges);
+ struct resource *b_res = bus->resource[0];
+ unsigned long size = 0, size1 = 0;
- if (!ranges->found_vga && found_vga) {
- struct pci_bus *b;
+ if (!(b_res->flags & IORESOURCE_IO))
+ return;
- ranges->found_vga = 1;
- /* Propogate presence of the VGA to upstream bridges */
- for (b = bus; b->parent; b = b->parent) {
-#if 0
- /* ? Do we actually need to enable PF memory? */
- b->resource[2]->start = 0;
+ for (ln=bus->devices.next; ln != &bus->devices; ln=ln->next) {
+ struct pci_dev *dev = pci_dev_b(ln);
+ int i;
+
+ for (i = 0; i < PCI_NUM_RESOURCES; i++) {
+ struct resource *r = &dev->resource[i];
+ unsigned long r_size;
+
+ if (!(r->flags & IORESOURCE_IO))
+ continue;
+ if (r->parent)
+ BUG();
+ r_size = r->end - r->start + 1;
+
+ if (r_size < 0x400)
+ /* Might be re-aligned for ISA */
+ size += r_size;
+ else
+ size1 += r_size;
+ }
+ /* ??? Reserve some resources for CardBus. */
+ if ((dev->class >> 8) == PCI_CLASS_BRIDGE_CARDBUS)
+ size1 += 4*1024;
+ }
+/* To be fixed in 2.5: we should have sort of HAVE_ISA
+ flag in the struct pci_bus. */
+#if defined(CONFIG_ISA) || defined(CONFIG_EISA)
+ size = (size & 0xff) + ((size & ~0xffUL) << 2);
#endif
- b->resource[0]->flags |= IORESOURCE_BUS_HAS_VGA;
+ size = ROUND_UP(size + size1, 4096);
+ if (!size) {
+ b_res->flags = 0;
+ return;
+ }
+ /* Alignment of the IO window is always 4K */
+ b_res->start = 4096;
+ b_res->end = b_res->start + size - 1;
+}
+
+/* Calculate the size of the bus and minimal alignment which
+ guarantees that all child resources fit in this size. */
+static void __init
+pbus_size_mem(struct pci_bus *bus, unsigned long mask, unsigned long type)
+{
+ struct list_head *ln;
+ unsigned long min_align, align, size;
+ unsigned long aligns[12]; /* Alignments from 1Mb to 2Gb */
+ int order, max_order;
+ struct resource *b_res = (type & IORESOURCE_PREFETCH) ?
+ bus->resource[2] : bus->resource[1];
+
+ memset(aligns, 0, sizeof(aligns));
+ max_order = 0;
+ size = 0;
+
+ for (ln=bus->devices.next; ln != &bus->devices; ln=ln->next) {
+ struct pci_dev *dev = pci_dev_b(ln);
+ int i;
+
+ for (i = 0; i < PCI_NUM_RESOURCES; i++) {
+ struct resource *r = &dev->resource[i];
+ unsigned long r_size;
+
+ if ((r->flags & mask) != type)
+ continue;
+ if (r->parent)
+ BUG();
+ r_size = r->end - r->start + 1;
+ /* For bridges size != alignment */
+ align = (i < PCI_BRIDGE_RESOURCES) ? r_size : r->start;
+ order = __ffs(align) - 20;
+ if (order > 11) {
+ printk(KERN_WARNING "PCI: region %s/%d "
+ "too large: %lx-%lx\n",
+ dev->slot_name, i, r->start, r->end);
+ r->flags = 0;
+ continue;
+ }
+ size += r_size;
+ if (order < 0)
+ order = 0;
+ /* Exclude ranges with size > align from
+ calculation of the alignment. */
+ if (size == align)
+ aligns[order] += align;
+ if (order > max_order)
+ max_order = order;
+ }
+ /* ??? Reserve some resources for CardBus. */
+ if ((dev->class >> 8) == PCI_CLASS_BRIDGE_CARDBUS) {
+ size += 1UL << 24; /* 16 Mb */
+ aligns[24 - 20] += 1UL << 24;
}
}
- for (ln=bus->children.next; ln != &bus->children; ln=ln->next) {
- struct pci_bus *b = pci_bus_b(ln);
- b->resource[0]->start = ranges->io_start = ranges->io_end;
- b->resource[1]->start = ranges->mem_start = ranges->mem_end;
+ align = 0;
+ min_align = 0;
+ for (order = 0; order <= max_order; order++) {
+ unsigned long align1 = 1UL << (order + 20);
+
+ if (!align)
+ min_align = align1;
+ else if (ROUND_UP(align + min_align, min_align) < align1)
+ min_align = align1 >> 1;
+ align += aligns[order];
+ }
+ size = ROUND_UP(size, min_align);
+ if (!size) {
+ b_res->flags = 0;
+ return;
+ }
+ b_res->start = min_align;
+ b_res->end = size + min_align - 1;
+}
+
+void __init
+pbus_size_bridges(struct pci_bus *bus)
+{
+ struct list_head *ln;
+ unsigned long mask, type;
- pbus_assign_resources(b, ranges);
+ for (ln=bus->children.next; ln != &bus->children; ln=ln->next)
+ pbus_size_bridges(pci_bus_b(ln));
- b->resource[0]->end = ranges->io_end - 1;
- b->resource[1]->end = ranges->mem_end - 1;
+ /* The root bus? */
+ if (!bus->self)
+ return;
- pci_setup_bridge(b);
+ pci_bridge_check_ranges(bus);
+
+ pbus_size_io(bus);
+
+ mask = type = IORESOURCE_MEM;
+ /* If the bridge supports prefetchable range, size it separately. */
+ if (bus->resource[2] &&
+ bus->resource[2]->flags & IORESOURCE_PREFETCH) {
+ pbus_size_mem(bus, IORESOURCE_PREFETCH, IORESOURCE_PREFETCH);
+ mask |= IORESOURCE_PREFETCH; /* Size non-prefetch only. */
}
+ pbus_size_mem(bus, mask, type);
}
void __init
-pci_assign_unassigned_resources(void)
+pbus_assign_resources(struct pci_bus *bus)
{
- struct pbus_set_ranges_data ranges;
struct list_head *ln;
- struct pci_dev *dev;
+ int found_vga = pbus_assign_resources_sorted(bus);
- for(ln=pci_root_buses.next; ln != &pci_root_buses; ln=ln->next) {
- struct pci_bus *b = pci_bus_b(ln);
+ if (found_vga) {
+ struct pci_bus *b;
- ranges.io_start = b->resource[0]->start + PCIBIOS_MIN_IO;
- ranges.mem_start = b->resource[1]->start + PCIBIOS_MIN_MEM;
- ranges.io_end = ranges.io_start;
- ranges.mem_end = ranges.mem_start;
- ranges.found_vga = 0;
- pbus_assign_resources(b, &ranges);
+ /* Propagate presence of the VGA to upstream bridges */
+ for (b = bus; b->parent; b = b->parent) {
+ b->resource[0]->flags |= IORESOURCE_BUS_HAS_VGA;
+ }
}
- pci_for_each_dev(dev) {
- pdev_enable_device(dev);
+ for (ln=bus->children.next; ln != &bus->children; ln=ln->next) {
+ struct pci_bus *b = pci_bus_b(ln);
+
+ pbus_assign_resources(b);
+ pci_setup_bridge(b);
}
}
-/* Check whether the bridge supports I/O forwarding.
- If not, its I/O base/limit register must be
- read-only and read as 0. */
-unsigned long __init
-pci_bridge_check_io(struct pci_dev *bridge)
+void __init
+pci_assign_unassigned_resources(void)
{
- u16 io;
+ struct list_head *ln;
+ struct pci_dev *dev;
- pci_read_config_word(bridge, PCI_IO_BASE, &io);
- if (!io) {
- pci_write_config_word(bridge, PCI_IO_BASE, 0xf0f0);
- pci_read_config_word(bridge, PCI_IO_BASE, &io);
- pci_write_config_word(bridge, PCI_IO_BASE, 0x0);
+ /* Depth first, calculate sizes and alignments of all
+ subordinate buses. */
+ for(ln=pci_root_buses.next; ln != &pci_root_buses; ln=ln->next)
+ pbus_size_bridges(pci_bus_b(ln));
+ /* Depth last, allocate resources and update the hardware. */
+ for(ln=pci_root_buses.next; ln != &pci_root_buses; ln=ln->next)
+ pbus_assign_resources(pci_bus_b(ln));
+
+ pci_for_each_dev(dev) {
+ pdev_enable_device(dev);
}
- if (io)
- return IORESOURCE_IO;
- printk(KERN_WARNING "PCI: bridge %s does not support I/O forwarding!\n",
- bridge->name);
- return 0;
}
--- 2.5.14/drivers/pci/setup-res.c Sun May 5 18:40:21 2002
+++ linux/drivers/pci/setup-res.c Sun May 5 18:40:35 2002
@@ -136,47 +136,45 @@ pci_assign_resource(struct pci_dev *dev,
return 0;
}
-/* Sort resources of a given type by alignment */
+/* Sort resources by alignment */
void __init
-pdev_sort_resources(struct pci_dev *dev,
- struct resource_list *head, u32 type_mask)
+pdev_sort_resources(struct pci_dev *dev, struct resource_list *head)
{
int i;
for (i = 0; i < PCI_NUM_RESOURCES; i++) {
struct resource *r;
struct resource_list *list, *tmp;
- unsigned long r_size;
-
- /* PCI-PCI bridges may have I/O ports or
- memory on the primary bus */
- if (dev->class >> 8 == PCI_CLASS_BRIDGE_PCI &&
- i >= PCI_BRIDGE_RESOURCES)
- continue;
+ unsigned long r_align;
r = &dev->resource[i];
- r_size = r->end - r->start;
+ r_align = r->end - r->start;
- if (!(r->flags & type_mask) || r->parent)
+ if (!(r->flags) || r->parent)
continue;
- if (!r_size) {
+ if (!r_align) {
printk(KERN_WARNING "PCI: Ignore bogus resource %d "
- "[%lx:%lx] of %s\n",
- i, r->start, r->end, dev->name);
+ "[%lx:%lx] of %s\n",
+ i, r->start, r->end, dev->name);
continue;
}
+ r_align = (i < PCI_BRIDGE_RESOURCES) ? r_align + 1 : r->start;
for (list = head; ; list = list->next) {
- unsigned long size = 0;
+ unsigned long align = 0;
struct resource_list *ln = list->next;
+ int idx;
- if (ln)
- size = ln->res->end - ln->res->start;
- if (r_size > size) {
+ if (ln) {
+ idx = ln->res - &ln->dev->resource[0];
+ align = (idx < PCI_BRIDGE_RESOURCES) ?
+ ln->res->end - ln->res->start + 1 :
+ ln->res->start;
+ }
+ if (r_align > align) {
tmp = kmalloc(sizeof(*tmp), GFP_KERNEL);
- if (!tmp) {
- printk(KERN_ERR "pdev_sort_resources(): kmalloc() failed!\n");
- continue;
- }
+ if (!tmp)
+ panic("pdev_sort_resources(): "
+ "kmalloc() failed!\n");
tmp->next = ln;
tmp->res = r;
tmp->dev = dev;
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/