You can get this changeset from bk://thebsh.namesys.com/bk/reiser3-linux-2.4
This changeset are cleaning up reiserfscode, removes stale comments, and
rewrites some "borrowed" functions so that all of the code in reiserfs subdir
should now only belong to NAMESYS.
Diffstat:
fs/reiserfs/bitmap.c | 5
fs/reiserfs/dir.c | 4
fs/reiserfs/inode.c | 37 ----
fs/reiserfs/namei.c | 184 ++++++------------------
fs/reiserfs/super.c | 326 ++++++++++++++++++++++++++------------------
include/linux/reiserfs_fs.h | 4
6 files changed, 250 insertions(+), 310 deletions(-)
Plain test patch:
# This is a BitKeeper generated patch for the following project:
# Project Name: Linux kernel tree
# This patch format is intended for GNU patch command version 2.5 or higher.
# This patch includes the following deltas:
# ChangeSet 1.383.2.38 -> 1.383.2.39
# fs/reiserfs/dir.c 1.11 -> 1.12
# fs/reiserfs/namei.c 1.19 -> 1.20
# fs/reiserfs/inode.c 1.32 -> 1.33
# include/linux/reiserfs_fs.h 1.16 -> 1.17
# fs/reiserfs/super.c 1.19 -> 1.20
# fs/reiserfs/bitmap.c 1.12 -> 1.13
#
# The following is the BitKeeper ChangeSet Log
# --------------------------------------------
# 02/04/30 green@angband.namesys.com 1.383.2.39
# reiserfs_fs.h, super.c, namei.c, inode.c, dir.c, bitmap.c:
# Here is a patch which remakes in original manner last bits in reiserfs
# code which looked like created by copy-n-paste-ing from other sources.
# Most of them are removed comments, some are adding intermidiate
# variables. The only one interesting change is new
# reiserfs_parse_options.
# --------------------------------------------
#
diff -Nru a/fs/reiserfs/bitmap.c b/fs/reiserfs/bitmap.c
--- a/fs/reiserfs/bitmap.c Tue May 7 17:54:11 2002
+++ b/fs/reiserfs/bitmap.c Tue May 7 17:54:11 2002
@@ -663,10 +663,7 @@
return ret;
}
-//
-// a portion of this function, was derived from minix or ext2's
-// analog. You should be able to tell which portion by looking at the
-// ext2 code and comparing.
+
static void __discard_prealloc (struct reiserfs_transaction_handle * th,
struct inode * inode)
{
diff -Nru a/fs/reiserfs/dir.c b/fs/reiserfs/dir.c
--- a/fs/reiserfs/dir.c Tue May 7 17:54:11 2002
+++ b/fs/reiserfs/dir.c Tue May 7 17:54:11 2002
@@ -106,7 +106,7 @@
if (!d_name[d_reclen - 1])
d_reclen = strlen (d_name);
- if (d_reclen > REISERFS_MAX_NAME_LEN(inode->i_sb->s_blocksize)){
+ if (d_reclen > REISERFS_MAX_NAME(inode->i_sb->s_blocksize)){
/* too big to send back to VFS */
continue ;
}
@@ -177,7 +177,7 @@
end:
- // FIXME: ext2_readdir does not reset f_pos
+
filp->f_pos = next_pos;
pathrelse (&path_to_entry);
reiserfs_check_path(&path_to_entry) ;
diff -Nru a/fs/reiserfs/inode.c b/fs/reiserfs/inode.c
--- a/fs/reiserfs/inode.c Tue May 7 17:54:11 2002
+++ b/fs/reiserfs/inode.c Tue May 7 17:54:11 2002
@@ -19,10 +19,7 @@
static int reiserfs_get_block (struct inode * inode, long block,
struct buffer_head * bh_result, int create);
-//
-// initially this function was derived from minix or ext2's analog and
-// evolved as the prototype did
-//
+
void reiserfs_delete_inode (struct inode * inode)
{
int jbegin_count = JOURNAL_PER_BALANCE_CNT * 2;
@@ -111,8 +108,7 @@
}
//
-// FIXME: we might cache recently accessed indirect item (or at least
-// first 15 pointers just like ext2 does
+// FIXME: we might cache recently accessed indirect item
// Ugh. Not too eager for that....
// I cut the code until such time as I see a convincing argument (benchmark).
@@ -543,12 +539,7 @@
#endif
return reiserfs_new_unf_blocknrs (th, allocated_block_nr, tag);
}
-//
-// initially this function was derived from ext2's analog and evolved
-// as the prototype did. You'll need to look at the ext2 version to
-// determine which parts are derivative, if any, understanding that
-// there are only so many ways to code to a given interface.
-//
+
static int reiserfs_get_block (struct inode * inode, long block,
struct buffer_head * bh_result, int create)
{
@@ -1142,11 +1133,6 @@
}
-//
-// initially this function was derived from minix or ext2's analog and
-// evolved as the prototype did
-//
-
/* looks for stat data in the tree, and fills up the fields of in-core
inode stat data fields */
void reiserfs_read_inode2 (struct inode * inode, void *p)
@@ -1368,10 +1354,6 @@
}
-//
-// initially this function was derived from minix or ext2's analog and
-// evolved as the prototype did
-//
/* looks for stat data, then copies fields to it, marks the buffer
containing stat data as dirty */
/* reiserfs inodes are never really dirty, since the dirty inode call
@@ -2042,18 +2024,13 @@
return error ;
}
-//
-// this is exactly what 2.3.99-pre9's ext2_readpage is
-//
+
static int reiserfs_readpage (struct file *f, struct page * page)
{
return block_read_full_page (page, reiserfs_get_block);
}
-//
-// modified from ext2_writepage is
-//
static int reiserfs_writepage (struct page * page)
{
struct inode *inode = page->mapping->host ;
@@ -2062,9 +2039,6 @@
}
-//
-// from ext2_prepare_write, but modified
-//
int reiserfs_prepare_write(struct file *f, struct page *page,
unsigned from, unsigned to) {
struct inode *inode = page->mapping->host ;
@@ -2074,9 +2048,6 @@
}
-//
-// this is exactly what 2.3.99-pre9's ext2_bmap is
-//
static int reiserfs_aop_bmap(struct address_space *as, long block) {
return generic_block_bmap(as, block, reiserfs_bmap) ;
}
diff -Nru a/fs/reiserfs/namei.c b/fs/reiserfs/namei.c
--- a/fs/reiserfs/namei.c Tue May 7 17:54:11 2002
+++ b/fs/reiserfs/namei.c Tue May 7 17:54:11 2002
@@ -195,13 +195,6 @@
}
-//
-// a portion of this function, particularly the VFS interface portion,
-// was derived from minix or ext2's analog and evolved as the
-// prototype did. You should be able to tell which portion by looking
-// at the ext2 code and comparing. It's subfunctions contain no code
-// used as a template unless they are so labeled.
-//
static int reiserfs_match (struct reiserfs_dir_entry * de,
const char * name, int namelen)
{
@@ -284,13 +277,6 @@
}
-//
-// a portion of this function, particularly the VFS interface portion,
-// was derived from minix or ext2's analog and evolved as the
-// prototype did. You should be able to tell which portion by looking
-// at the ext2 code and comparing. It's subfunctions contain no code
-// used as a template unless they are so labeled.
-//
// may return NAME_FOUND, NAME_FOUND_INVISIBLE, NAME_NOT_FOUND
// FIXME: should add something like IOERROR
static int reiserfs_find_entry (struct inode * dir, const char * name, int namelen,
@@ -300,7 +286,7 @@
int retval;
- if (namelen > REISERFS_MAX_NAME_LEN (dir->i_sb->s_blocksize))
+ if (namelen > REISERFS_MAX_NAME (dir->i_sb->s_blocksize))
return NAME_NOT_FOUND;
/* we will search for this key in the tree */
@@ -330,13 +316,6 @@
}
-//
-// a portion of this function, particularly the VFS interface portion,
-// was derived from minix or ext2's analog and evolved as the
-// prototype did. You should be able to tell which portion by looking
-// at the ext2 code and comparing. It's subfunctions contain no code
-// used as a template unless they are so labeled.
-//
static struct dentry * reiserfs_lookup (struct inode * dir, struct dentry * dentry)
{
int retval;
@@ -346,7 +325,7 @@
reiserfs_check_lock_depth("lookup") ;
- if (dentry->d_name.len > REISERFS_MAX_NAME_LEN (dir->i_sb->s_blocksize))
+ if (REISERFS_MAX_NAME (dir->i_sb->s_blocksize) < dentry->d_name.len)
return ERR_PTR(-ENAMETOOLONG);
de.de_gen_number_bit_string = 0;
@@ -366,14 +345,6 @@
return NULL;
}
-//
-// a portion of this function, particularly the VFS interface portion,
-// was derived from minix or ext2's analog and evolved as the
-// prototype did. You should be able to tell which portion by looking
-// at the ext2 code and comparing. It's subfunctions contain no code
-// used as a template unless they are so labeled.
-//
-
/* add entry to the directory (entry can be hidden).
insert definition of when hidden directories are used here -Hans
@@ -401,7 +372,7 @@
if (!namelen)
return -EINVAL;
- if (namelen > REISERFS_MAX_NAME_LEN (dir->i_sb->s_blocksize))
+ if (namelen > REISERFS_MAX_NAME (dir->i_sb->s_blocksize))
return -ENAMETOOLONG;
/* each entry has unique key. compose it */
@@ -507,13 +478,6 @@
}
-//
-// a portion of this function, particularly the VFS interface portion,
-// was derived from minix or ext2's analog and evolved as the
-// prototype did. You should be able to tell which portion by looking
-// at the ext2 code and comparing. It's subfunctions contain no code
-// used as a template unless they are so labeled.
-//
static int reiserfs_create (struct inode * dir, struct dentry *dentry, int mode)
{
int retval;
@@ -523,8 +487,7 @@
struct reiserfs_transaction_handle th ;
- inode = new_inode(dir->i_sb) ;
- if (!inode) {
+ if (!(inode = new_inode(dir->i_sb))) {
return -ENOMEM ;
}
journal_begin(&th, dir->i_sb, jbegin_count) ;
@@ -563,13 +526,6 @@
}
-//
-// a portion of this function, particularly the VFS interface portion,
-// was derived from minix or ext2's analog and evolved as the
-// prototype did. You should be able to tell which portion by looking
-// at the ext2 code and comparing. It's subfunctions contain no code
-// used as a template unless they are so labeled.
-//
static int reiserfs_mknod (struct inode * dir, struct dentry *dentry, int mode, int rdev)
{
int retval;
@@ -578,8 +534,7 @@
struct reiserfs_transaction_handle th ;
int jbegin_count = JOURNAL_PER_BALANCE_CNT * 3;
- inode = new_inode(dir->i_sb) ;
- if (!inode) {
+ if (!(inode = new_inode(dir->i_sb))) {
return -ENOMEM ;
}
journal_begin(&th, dir->i_sb, jbegin_count) ;
@@ -618,13 +573,6 @@
}
-//
-// a portion of this function, particularly the VFS interface portion,
-// was derived from minix or ext2's analog and evolved as the
-// prototype did. You should be able to tell which portion by looking
-// at the ext2 code and comparing. It's subfunctions contain no code
-// used as a template unless they are so labeled.
-//
static int reiserfs_mkdir (struct inode * dir, struct dentry *dentry, int mode)
{
int retval;
@@ -633,8 +581,7 @@
struct reiserfs_transaction_handle th ;
int jbegin_count = JOURNAL_PER_BALANCE_CNT * 3;
- inode = new_inode(dir->i_sb) ;
- if (!inode) {
+ if (!(inode = new_inode(dir->i_sb))) {
return -ENOMEM ;
}
journal_begin(&th, dir->i_sb, jbegin_count) ;
@@ -697,13 +644,6 @@
}
-//
-// a portion of this function, particularly the VFS interface portion,
-// was derived from minix or ext2's analog and evolved as the
-// prototype did. You should be able to tell which portion by looking
-// at the ext2 code and comparing. It's subfunctions contain no code
-// used as a template unless they are so labeled.
-//
static int reiserfs_rmdir (struct inode * dir, struct dentry *dentry)
{
int retval;
@@ -784,13 +724,6 @@
}
-//
-// a portion of this function, particularly the VFS interface portion,
-// was derived from minix or ext2's analog and evolved as the
-// prototype did. You should be able to tell which portion by looking
-// at the ext2 code and comparing. It's subfunctions contain no code
-// used as a template unless they are so labeled.
-//
static int reiserfs_unlink (struct inode * dir, struct dentry *dentry)
{
int retval;
@@ -866,14 +799,7 @@
}
-//
-// a portion of this function, particularly the VFS interface portion,
-// was derived from minix or ext2's analog and evolved as the
-// prototype did. You should be able to tell which portion by looking
-// at the ext2 code and comparing. It's subfunctions contain no code
-// used as a template unless they are so labeled.
-//
-static int reiserfs_symlink (struct inode * dir, struct dentry * dentry, const char * symname)
+static int reiserfs_symlink (struct inode * parent_dir, struct dentry * dentry, const char * symname)
{
int retval;
struct inode * inode;
@@ -884,18 +810,17 @@
int jbegin_count = JOURNAL_PER_BALANCE_CNT * 3;
- inode = new_inode(dir->i_sb) ;
- if (!inode) {
- return -ENOMEM ;
+ if (!(inode = new_inode(parent_dir->i_sb))) {
+ return -ENOMEM ;
}
item_len = ROUND_UP (strlen (symname));
- if (item_len > MAX_DIRECT_ITEM_LEN (dir->i_sb->s_blocksize)) {
+ if (item_len > MAX_DIRECT_ITEM_LEN (parent_dir->i_sb->s_blocksize)) {
iput(inode) ;
return -ENAMETOOLONG;
}
- name = reiserfs_kmalloc (item_len, GFP_NOFS, dir->i_sb);
+ name = reiserfs_kmalloc (item_len, GFP_NOFS, parent_dir->i_sb);
if (!name) {
iput(inode) ;
return -ENOMEM;
@@ -903,20 +828,20 @@
memcpy (name, symname, strlen (symname));
padd_item (name, item_len, strlen (symname));
- journal_begin(&th, dir->i_sb, jbegin_count) ;
+ journal_begin(&th, parent_dir->i_sb, jbegin_count) ;
windex = push_journal_writer("reiserfs_symlink") ;
- inode = reiserfs_new_inode (&th, dir, S_IFLNK | S_IRWXUGO, name, strlen (symname), dentry,
+ inode = reiserfs_new_inode (&th, parent_dir, S_IFLNK | S_IRWXUGO, name, strlen (symname), dentry,
inode, &retval);
- reiserfs_kfree (name, item_len, dir->i_sb);
+ reiserfs_kfree (name, item_len, parent_dir->i_sb);
if (inode == 0) { /* reiserfs_new_inode iputs for us */
pop_journal_writer(windex) ;
- journal_end(&th, dir->i_sb, jbegin_count) ;
+ journal_end(&th, parent_dir->i_sb, jbegin_count) ;
return retval;
}
reiserfs_update_inode_transaction(inode) ;
- reiserfs_update_inode_transaction(dir) ;
+ reiserfs_update_inode_transaction(parent_dir) ;
inode->i_op = &page_symlink_inode_operations;
inode->i_mapping->a_ops = &reiserfs_address_space_operations;
@@ -925,31 +850,24 @@
//
//reiserfs_update_sd (&th, inode, READ_BLOCKS);
- retval = reiserfs_add_entry (&th, dir, dentry->d_name.name, dentry->d_name.len,
+ retval = reiserfs_add_entry (&th, parent_dir, dentry->d_name.name, dentry->d_name.len,
inode, 1/*visible*/);
if (retval) {
inode->i_nlink--;
reiserfs_update_sd (&th, inode);
pop_journal_writer(windex) ;
- journal_end(&th, dir->i_sb, jbegin_count) ;
+ journal_end(&th, parent_dir->i_sb, jbegin_count) ;
iput (inode);
return retval;
}
d_instantiate(dentry, inode);
pop_journal_writer(windex) ;
- journal_end(&th, dir->i_sb, jbegin_count) ;
+ journal_end(&th, parent_dir->i_sb, jbegin_count) ;
return 0;
}
-//
-// a portion of this function, particularly the VFS interface portion,
-// was derived from minix or ext2's analog and evolved as the
-// prototype did. You should be able to tell which portion by looking
-// at the ext2 code and comparing. It's subfunctions contain no code
-// used as a template unless they are so labeled.
-//
static int reiserfs_link (struct dentry * old_dentry, struct inode * dir, struct dentry * dentry)
{
int retval;
@@ -957,6 +875,7 @@
int windex ;
struct reiserfs_transaction_handle th ;
int jbegin_count = JOURNAL_PER_BALANCE_CNT * 3;
+ time_t ctime;
if (S_ISDIR(inode->i_mode))
@@ -984,7 +903,8 @@
}
inode->i_nlink++;
- inode->i_ctime = CURRENT_TIME;
+ ctime = CURRENT_TIME;
+ inode->i_ctime = ctime;
reiserfs_update_sd (&th, inode);
atomic_inc(&inode->i_count) ;
@@ -1037,14 +957,6 @@
}
-//
-// a portion of this function, particularly the VFS interface portion,
-// was derived from minix or ext2's analog and evolved as the
-// prototype did. You should be able to tell which portion by looking
-// at the ext2 code and comparing. It's subfunctions contain no code
-// used as a template unless they are so labeled.
-//
-
/*
* process, that is going to call fix_nodes/do_balance must hold only
* one path. If it holds 2 or more, it can get into endless waiting in
@@ -1059,10 +971,12 @@
INITIALIZE_PATH (dot_dot_entry_path);
struct item_head new_entry_ih, old_entry_ih, dot_dot_ih ;
struct reiserfs_dir_entry old_de, new_de, dot_dot_de;
- struct inode * old_inode, * new_inode;
+ struct inode * old_inode, * new_dentry_inode;
int windex ;
struct reiserfs_transaction_handle th ;
int jbegin_count ;
+ umode_t old_inode_mode;
+ time_t ctime;
/* two balancings: old name removal, new name insertion or "save" link,
@@ -1071,7 +985,7 @@
jbegin_count = JOURNAL_PER_BALANCE_CNT * 3 + 3;
old_inode = old_dentry->d_inode;
- new_inode = new_dentry->d_inode;
+ new_dentry_inode = new_dentry->d_inode;
// make sure, that oldname still exists and points to an object we
// are going to rename
@@ -1086,13 +1000,14 @@
return -ENOENT;
}
- if (S_ISDIR(old_inode->i_mode)) {
+ old_inode_mode = old_inode->i_mode;
+ if (S_ISDIR(old_inode_mode)) {
// make sure, that directory being renamed has correct ".."
// and that its new parent directory has not too many links
// already
- if (new_inode) {
- if (!reiserfs_empty_dir(new_inode)) {
+ if (new_dentry_inode) {
+ if (!reiserfs_empty_dir(new_dentry_inode)) {
return -ENOTEMPTY;
}
}
@@ -1118,9 +1033,7 @@
retval = reiserfs_add_entry (&th, new_dir, new_dentry->d_name.name, new_dentry->d_name.len,
old_inode, 0);
if (retval == -EEXIST) {
- // FIXME: is it possible, that new_inode == 0 here? If yes, it
- // is not clear how does ext2 handle that
- if (!new_inode) {
+ if (!new_dentry_inode) {
reiserfs_panic (old_dir->i_sb,
"vs-7050: new entry is found, new inode == 0\n");
}
@@ -1138,8 +1051,8 @@
*/
reiserfs_update_inode_transaction(old_inode) ;
- if (new_inode)
- reiserfs_update_inode_transaction(new_inode) ;
+ if (new_dentry_inode)
+ reiserfs_update_inode_transaction(new_dentry_inode) ;
while (1) {
// look for old name using corresponding entry key (found by reiserfs_find_entry)
@@ -1186,18 +1099,18 @@
if (item_moved(&new_entry_ih, &new_entry_path) ||
!entry_points_to_object(new_dentry->d_name.name,
new_dentry->d_name.len,
- &new_de, new_inode) ||
+ &new_de, new_dentry_inode) ||
item_moved(&old_entry_ih, &old_entry_path) ||
!entry_points_to_object (old_dentry->d_name.name,
old_dentry->d_name.len,
&old_de, old_inode)) {
reiserfs_restore_prepared_buffer (old_inode->i_sb, new_de.de_bh);
reiserfs_restore_prepared_buffer (old_inode->i_sb, old_de.de_bh);
- if (S_ISDIR(old_inode->i_mode))
+ if (S_ISDIR(old_inode_mode))
reiserfs_restore_prepared_buffer (old_inode->i_sb, dot_dot_de.de_bh);
continue;
}
- if (S_ISDIR(old_inode->i_mode)) {
+ if (S_ISDIR(old_inode_mode)) {
if ( item_moved(&dot_dot_ih, &dot_dot_entry_path) ||
!entry_points_to_object ( "..", 2, &dot_dot_de, old_dir) ) {
reiserfs_restore_prepared_buffer (old_inode->i_sb, old_de.de_bh);
@@ -1208,7 +1121,7 @@
}
- RFALSE( S_ISDIR(old_inode->i_mode) &&
+ RFALSE( S_ISDIR(old_inode_mode) &&
!reiserfs_buffer_prepared(dot_dot_de.de_bh), "" );
break;
@@ -1226,22 +1139,23 @@
old_dir->i_ctime = old_dir->i_mtime = CURRENT_TIME;
new_dir->i_ctime = new_dir->i_mtime = CURRENT_TIME;
- if (new_inode) {
+ if (new_dentry_inode) {
// adjust link number of the victim
- if (S_ISDIR(new_inode->i_mode)) {
- new_inode->i_nlink = 0;
+ if (S_ISDIR(new_dentry_inode->i_mode)) {
+ new_dentry_inode->i_nlink = 0;
} else {
- new_inode->i_nlink--;
+ new_dentry_inode->i_nlink--;
}
- new_inode->i_ctime = CURRENT_TIME;
+ ctime = CURRENT_TIME;
+ new_dentry_inode->i_ctime = ctime;
}
- if (S_ISDIR(old_inode->i_mode)) {
+ if (S_ISDIR(old_inode_mode)) {
// adjust ".." of renamed directory
set_ino_in_dir_entry (&dot_dot_de, INODE_PKEY (new_dir));
journal_mark_dirty (&th, new_dir->i_sb, dot_dot_de.de_bh);
- if (!new_inode)
+ if (!new_dentry_inode)
/* there (in new_dir) was no directory, so it got new link
(".." of renamed directory) */
INC_DIR_INODE_NLINK(new_dir);
@@ -1266,10 +1180,10 @@
reiserfs_update_sd (&th, old_dir);
reiserfs_update_sd (&th, new_dir);
- if (new_inode) {
- if (new_inode->i_nlink == 0)
- add_save_link (&th, new_inode, 0/* not truncate */);
- reiserfs_update_sd (&th, new_inode);
+ if (new_dentry_inode) {
+ if (new_dentry_inode->i_nlink == 0)
+ add_save_link (&th, new_dentry_inode, 0/* not truncate */);
+ reiserfs_update_sd (&th, new_dentry_inode);
}
pop_journal_writer(windex) ;
diff -Nru a/fs/reiserfs/super.c b/fs/reiserfs/super.c
--- a/fs/reiserfs/super.c Tue May 7 17:54:11 2002
+++ b/fs/reiserfs/super.c Tue May 7 17:54:11 2002
@@ -29,13 +29,6 @@
static int reiserfs_remount (struct super_block * s, int * flags, char * data);
static int reiserfs_statfs (struct super_block * s, struct statfs * buf);
-//
-// a portion of this function, particularly the VFS interface portion,
-// was derived from minix or ext2's analog and evolved as the
-// prototype did. You should be able to tell which portion by looking
-// at the ext2 code and comparing. It's subfunctions contain no code
-// used as a template unless they are so labeled.
-//
static void reiserfs_write_super (struct super_block * s)
{
@@ -48,13 +41,6 @@
unlock_kernel() ;
}
-//
-// a portion of this function, particularly the VFS interface portion,
-// was derived from minix or ext2's analog and evolved as the
-// prototype did. You should be able to tell which portion by looking
-// at the ext2 code and comparing. It's subfunctions contain no code
-// used as a template unless they are so labeled.
-//
static void reiserfs_write_super_lockfs (struct super_block * s)
{
@@ -333,13 +319,6 @@
}
-//
-// a portion of this function, particularly the VFS interface portion,
-// was derived from minix or ext2's analog and evolved as the
-// prototype did. You should be able to tell which portion by looking
-// at the ext2 code and comparing. It's subfunctions contain no code
-// used as a template unless they are so labeled.
-//
static void reiserfs_put_super (struct super_block * s)
{
int i;
@@ -422,81 +401,190 @@
};
-/* this was (ext2)parse_options */
-static int parse_options (char * options, unsigned long * mount_options, unsigned long * blocks)
-{
- char * this_char;
+/* this struct is used in reiserfs_getopt () for containing the value for those
+ mount options that have values rather than being toggles. */
+typedef struct {
char * value;
-
+ int bitmask; /* bit which is to be set in mount_options bitmask when this
+ value is found, 0 is no bits are to be set */
+} arg_desc_t;
+
+
+/* this struct is used in reiserfs_getopt() for describing the set of reiserfs
+ mount options */
+typedef struct {
+ char * option_name;
+ int arg_required; /* 0 is argument is not required, not 0 otherwise */
+ const arg_desc_t * values; /* list of values accepted by an option */
+ int bitmask; /* bit which is to be set in mount_options bitmask when this
+ option is selected, 0 is not bits are to be set */
+} opt_desc_t;
+
+
+/* possible values for "-o hash=" and bits which are to be set in s_mount_opt
+ of reiserfs specific part of in-core super block */
+const arg_desc_t hash[] = {
+ {"rupasov", FORCE_RUPASOV_HASH},
+ {"tea", FORCE_TEA_HASH},
+ {"r5", FORCE_R5_HASH},
+ {"detect", FORCE_HASH_DETECT},
+ {NULL, 0}
+};
+
+
+/* possible values for "-o block-allocator=" and bits which are to be set in
+ s_mount_opt of reiserfs specific part of in-core super block */
+const arg_desc_t balloc[] = {
+ {"noborder", REISERFS_NO_BORDER},
+ {"no_unhashed_relocation", REISERFS_NO_UNHASHED_RELOCATION},
+ {"hashed_relocation", REISERFS_HASHED_RELOCATION},
+ {"test4", REISERFS_TEST4},
+ {NULL, 0}
+};
+
+
+/* proceed only one option from a list *cur - string containing of mount options
+ opts - array of options which are accepted
+ opt_arg - if option is found and requires an argument and if it is specifed
+ in the input - pointer to the argument is stored here
+ bit_flags - if option requires to set a certain bit - it is set here
+ return -1 if unknown option is found, opt->arg_required otherwise */
+static int reiserfs_getopt (char ** cur, opt_desc_t * opts, char ** opt_arg,
+ unsigned long * bit_flags)
+{
+ char * p;
+ /* foo=bar,
+ ^ ^ ^
+ | | +-- option_end
+ | +-- arg_start
+ +-- option_start
+ */
+ const opt_desc_t * opt;
+ const arg_desc_t * arg;
+
+
+ p = *cur;
+
+ /* assume argument cannot contain commas */
+ *cur = strchr (p, ',');
+ if (*cur) {
+ *(*cur) = '\0';
+ (*cur) ++;
+ }
+
+ /* for every option in the list */
+ for (opt = opts; opt->option_name; opt ++) {
+ if (!strncmp (p, opt->option_name, strlen (opt->option_name))) {
+ if (bit_flags && opt->bitmask)
+ set_bit (opt->bitmask, bit_flags);
+ break;
+ }
+ }
+ if (!opt->option_name) {
+ printk ("reiserfs_getopt: unknown option \"%s\"\n", p);
+ return -1;
+ }
+
+ p += strlen (opt->option_name);
+ switch (*p) {
+ case '=':
+ if (!opt->arg_required) {
+ printk ("reiserfs_getopt: the option \"%s\" does not require an argument\n",
+ opt->option_name);
+ return -1;
+ }
+ break;
+
+ case 0:
+ if (opt->arg_required) {
+ printk ("reiserfs_getopt: the option \"%s\" requires an argument\n", opt->option_name);
+ return -1;
+ }
+ break;
+ default:
+ printk ("reiserfs_getopt: head of option \"%s\" is only correct\n", opt->option_name);
+ return -1;
+ }
+
+ /* move to the argument */
+ p ++;
+
+ if (!strlen (p)) {
+ /* this catches "option=," */
+ printk ("reiserfs_getopt: empty argument for \"%s\"\n", opt->option_name);
+ return -1;
+ }
+
+ if (!opt->values) {
+ /* *opt_arg contains pointer to argument */
+ *opt_arg = p;
+ return opt->arg_required;
+ }
+
+ /* values possible for this option are listed in opt->values */
+ for (arg = opt->values; arg->value; arg ++) {
+ if (!strcmp (p, arg->value)) {
+ if (bit_flags && arg->bitmask)
+ set_bit (arg->bitmask, bit_flags);
+ return opt->arg_required;
+ }
+ }
+
+ printk ("reiserfs_getopt: bad value \"%s\" for option \"%s\"\n", p, opt->option_name);
+ return -1;
+}
+
+
+/* returns 0 if something is wrong in option string, 1 - otherwise */
+static int reiserfs_parse_options (char * options, /* string given via mount's -o */
+ unsigned long * mount_options,
+ /* after the parsing phase, contains the
+ collection of bitflags defining what
+ mount options were selected. */
+ unsigned long * blocks) /* strtol-ed from NNN of resize=NNN */
+{
+ int c;
+ char * arg = NULL;
+ char * pos;
+ opt_desc_t opts[] = {
+ {"notail", 0, 0, NOTAIL},
+ {"conv", 0, 0, REISERFS_CONVERT},
+ {"nolog", 0, 0, 0},
+ {"replayonly", 0, 0, REPLAYONLY},
+
+ {"block-allocator", 'a', balloc, 0},
+ {"hash", 'h', hash, FORCE_HASH_DETECT},
+
+ {"resize", 'r', 0, 0},
+ {NULL, 0, 0, 0}
+ };
+
*blocks = 0;
- if (!options)
+ if (!options || !*options)
/* use default configuration: create tails, journaling on, no
- conversion to newest format */
+ conversion to newest format */
return 1;
- for (this_char = strtok (options, ","); this_char != NULL; this_char = strtok (NULL, ",")) {
- if ((value = strchr (this_char, '=')) != NULL)
- *value++ = 0;
- if (!strcmp (this_char, "notail")) {
- set_bit (NOTAIL, mount_options);
- } else if (!strcmp (this_char, "conv")) {
- // if this is set, we update super block such that
- // the partition will not be mounable by 3.5.x anymore
- set_bit (REISERFS_CONVERT, mount_options);
- } else if (!strcmp (this_char, "noborder")) {
- /* this is used for benchmarking
- experimental variations, it is not
- intended for users to use, only for
- developers who want to casually
- hack in something to test */
- set_bit (REISERFS_NO_BORDER, mount_options);
- } else if (!strcmp (this_char, "no_unhashed_relocation")) {
- set_bit (REISERFS_NO_UNHASHED_RELOCATION, mount_options);
- } else if (!strcmp (this_char, "hashed_relocation")) {
- set_bit (REISERFS_HASHED_RELOCATION, mount_options);
- } else if (!strcmp (this_char, "test4")) {
- set_bit (REISERFS_TEST4, mount_options);
- } else if (!strcmp (this_char, "nolog")) {
- reiserfs_warning("reiserfs: nolog mount option not supported yet\n");
- } else if (!strcmp (this_char, "replayonly")) {
- set_bit (REPLAYONLY, mount_options);
- } else if (!strcmp (this_char, "resize")) {
- if (value && *value){
- *blocks = simple_strtoul (value, &value, 0);
- } else {
- printk("reiserfs: resize option requires a value\n");
+
+ for (pos = options; pos; ) {
+ c = reiserfs_getopt (&pos, opts, &arg, mount_options);
+ if (c == -1)
+ /* wrong option is given */
+ return 0;
+
+ if (c == 'r') {
+ char * p;
+
+ p = 0;
+ /* "resize=NNN" */
+ *blocks = simple_strtoul (arg, &p, 0);
+ if (*p != '\0') {
+ /* NNN does not look like a number */
+ printk ("reiserfs_parse_options: bad value %s\n", arg);
return 0;
}
- } else if (!strcmp (this_char, "hash")) {
- if (value && *value) {
- /* if they specify any hash option, we force detection
- ** to make sure they aren't using the wrong hash
- */
- if (!strcmp(value, "rupasov")) {
- set_bit (FORCE_RUPASOV_HASH, mount_options);
- set_bit (FORCE_HASH_DETECT, mount_options);
- } else if (!strcmp(value, "tea")) {
- set_bit (FORCE_TEA_HASH, mount_options);
- set_bit (FORCE_HASH_DETECT, mount_options);
- } else if (!strcmp(value, "r5")) {
- set_bit (FORCE_R5_HASH, mount_options);
- set_bit (FORCE_HASH_DETECT, mount_options);
- } else if (!strcmp(value, "detect")) {
- set_bit (FORCE_HASH_DETECT, mount_options);
- } else {
- printk("reiserfs: invalid hash function specified\n") ;
- return 0 ;
- }
- } else {
- printk("reiserfs: hash option requires a value\n");
- return 0 ;
- }
- } else if (!strcmp (this_char, "attrs")) {
- set_bit (REISERFS_ATTRS, mount_options);
- } else {
- printk ("reiserfs: Unrecognized mount option %s\n", this_char);
- return 0;
}
}
+
return 1;
}
@@ -524,14 +612,7 @@
}
}
-//
-// a portion of this function, particularly the VFS interface portion,
-// was derived from minix or ext2's analog and evolved as the
-// prototype did. You should be able to tell which portion by looking
-// at the ext2 code and comparing. It's subfunctions contain no code
-// used as a template unless they are so labeled.
-//
-static int reiserfs_remount (struct super_block * s, int * flags, char * data)
+static int reiserfs_remount (struct super_block * s, int * mount_flags, char * data)
{
struct reiserfs_super_block * rs;
struct reiserfs_transaction_handle th ;
@@ -540,7 +621,7 @@
rs = SB_DISK_SUPER_BLOCK (s);
- if (!parse_options(data, &mount_options, &blocks))
+ if (!reiserfs_parse_options(data, &mount_options, &blocks))
return 0;
#define SET_OPT( opt, bits, super ) \
@@ -564,12 +645,11 @@
return rc;
}
- if ((unsigned long)(*flags & MS_RDONLY) == (s->s_flags & MS_RDONLY)) {
- /* there is nothing to do to remount read-only fs as read-only fs */
- return 0;
- }
-
- if (*flags & MS_RDONLY) {
+ if (*mount_flags & MS_RDONLY) {
+ /* remount rean-only */
+ if (s->s_flags & MS_RDONLY)
+ /* it is read-only already */
+ return 0;
/* try to remount file system with read-only permissions */
if (sb_state(rs) == REISERFS_VALID_FS || s->u.reiserfs_sb.s_mount_state != REISERFS_VALID_FS) {
return 0;
@@ -585,7 +665,7 @@
s->u.reiserfs_sb.s_mount_state = sb_state(rs) ;
s->s_flags &= ~MS_RDONLY ; /* now it is safe to call journal_begin */
journal_begin(&th, s, 10) ;
-
+
/* Mount a partition which is read-only, read-write */
reiserfs_prepare_for_journal(s, SB_BUFFER_WITH_SB(s), 1) ;
s->u.reiserfs_sb.s_mount_state = sb_state(rs);
@@ -600,7 +680,7 @@
SB_JOURNAL(s)->j_must_wait = 1 ;
journal_end(&th, s, 10) ;
- if (!( *flags & MS_RDONLY ) )
+ if (!( *mount_flags & MS_RDONLY ) )
finish_unfinished( s );
return 0;
@@ -951,13 +1031,6 @@
return 0;
}
-//
-// a portion of this function, particularly the VFS interface portion,
-// was derived from minix or ext2's analog and evolved as the
-// prototype did. You should be able to tell which portion by looking
-// at the ext2 code and comparing. It's subfunctions contain no code
-// used as a template unless they are so labeled.
-//
static struct super_block * reiserfs_read_super (struct super_block * s, void * data, int silent)
{
int size;
@@ -976,7 +1049,7 @@
memset (&s->u.reiserfs_sb, 0, sizeof (struct reiserfs_sb_info));
- if (parse_options ((char *) data, &(s->u.reiserfs_sb.s_mount_opt), &blocks) == 0) {
+ if (reiserfs_parse_options ((char *) data, &(s->u.reiserfs_sb.s_mount_opt), &blocks) == 0) {
return NULL;
}
@@ -1138,34 +1211,24 @@
}
-//
-// a portion of this function, particularly the VFS interface portion,
-// was derived from minix or ext2's analog and evolved as the
-// prototype did. You should be able to tell which portion by looking
-// at the ext2 code and comparing. It's subfunctions contain no code
-// used as a template unless they are so labeled.
-//
static int reiserfs_statfs (struct super_block * s, struct statfs * buf)
{
struct reiserfs_super_block * rs = SB_DISK_SUPER_BLOCK (s);
- /* changed to accomodate gcc folks.*/
- buf->f_type = REISERFS_SUPER_MAGIC;
- buf->f_bsize = s->s_blocksize;
- buf->f_blocks = sb_block_count(rs) - sb_bmap_nr(rs) - 1;
+ buf->f_namelen = (REISERFS_MAX_NAME (s->s_blocksize));
+ buf->f_ffree = -1;
+ buf->f_files = -1;
buf->f_bfree = sb_free_blocks(rs);
buf->f_bavail = buf->f_bfree;
- buf->f_files = -1;
- buf->f_ffree = -1;
- buf->f_namelen = (REISERFS_MAX_NAME_LEN (s->s_blocksize));
+ buf->f_blocks = sb_block_count(rs) - sb_bmap_nr(rs) - 1;
+ buf->f_bsize = 8192; /*s->s_blocksize;*/
+ /* changed to accomodate gcc folks.*/
+ buf->f_type = REISERFS_SUPER_MAGIC;
return 0;
}
static DECLARE_FSTYPE_DEV(reiserfs_fs_type,"reiserfs",reiserfs_read_super);
-//
-// this is exactly what 2.3.99-pre9's init_ext2_fs is
-//
static int __init init_reiserfs_fs (void)
{
reiserfs_proc_info_global_init();
@@ -1179,9 +1242,6 @@
MODULE_LICENSE("GPL");
EXPORT_NO_SYMBOLS;
-//
-// this is exactly what 2.3.99-pre9's init_ext2_fs is
-//
static void __exit exit_reiserfs_fs(void)
{
reiserfs_proc_unregister_global( "version" );
diff -Nru a/include/linux/reiserfs_fs.h b/include/linux/reiserfs_fs.h
--- a/include/linux/reiserfs_fs.h Tue May 7 17:54:11 2002
+++ b/include/linux/reiserfs_fs.h Tue May 7 17:54:11 2002
@@ -953,9 +953,7 @@
#define B_I_E_NAME(bh,ih,entry_num) ((char *)(bh->b_data + ih_location(ih) + deh_location(B_I_DEH(bh,ih)+(entry_num))))
// two entries per block (at least)
-//#define REISERFS_MAX_NAME_LEN(block_size)
-//((block_size - BLKH_SIZE - IH_SIZE - DEH_SIZE * 2) / 2)
-#define REISERFS_MAX_NAME_LEN(block_size) 255
+#define REISERFS_MAX_NAME(block_size) 255
/* this structure is used for operations on directory entries. It is
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/