Re: Flash device IDs

David Woodhouse (dwmw2@infradead.org)
Tue, 23 Apr 2002 15:24:46 +0100

Andries.Brouwer@cwi.nl said:
> It is worse. The commands are SCSI-like, but vendor-unique. So one
> has to discover the commands and the details of the media format. I
> wrote an ECC routine, and do something more or less random for the
> connection between logical and physical blocks. If you have ECC and
> LBA/PBA handling, then there is more to merge.

operations on NAND flash - read/write/erase commands?

> [Things are not quite straightforward. I think the media uses 512+16
> byte sectors, but my SCSI commands must use 512+64 byte sectors.][Of
> course 512 and 16 are variables. Don't know about 64.]

That definitely sounds like you're dealing with raw NAND flash chips -
512 bytes with 16 bytes of 'spare' area - albeit through a _very_
strange interface.

If we have to write code to handle the actual SmartMedia translation layer,
which does translation of logical addresses to physical addresses for reads
and handles safely writing the data to a new address before updating the
metadata and possibly erasing old versions of the replaced logical sector,
etc, then we should make sure it works with both the USB readers and the
raw flash chips.

--
dwmw2




-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/