Re: COM1 became ttyS01 in 2.4.19-pre7

Khalid Aziz (khalid_aziz@hp.com)
Thu, 18 Apr 2002 17:06:43 -0600

Look for a patch already posted to LKML on Tuesday under thread "Linux
2.4.19-pre7".

--
Khalid


Pavel Roskin wrote:
> 
> Hello!
> 
> The serial ports have changed their names after upgrading from 2.4.19-pre4
> to 2.4.19-pre7.  What used to be /dev/ttyS0 is /dev/ttyS1 now.
> 
> This is from the kernel log:
> 
> Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ
> SERIAL_PCI enabled
> ttyS01 at 0x03f8 (irq = 4) is a 16550A
> ttyS02 at 0x02f8 (irq = 3) is a 16550A
> 
> $ ls -l /dev/tts/
> total 0
> crw-rw-rw-    1 root     root       4,  65 Apr 18 18:50 1
> crw-rw-rw-    1 root     root       4,  66 Dec 31  1969 2
> 
> I'm using AMD K7, SMP is disabled, serial ports are enabled, ACPI is
> disabled, APM is enabled, devfs is enabled and used, CONFIG_SERIAL_CONSOLE
> is enabled but not currently used.  The motherboard is AOpen KT-133.  The
> ports are set in BIOS to standard COM1 and COM2 settings.
> 
> I'm ready to provide more information if needed.
> 
> --
> Regards,
> Pavel Roskin
> 
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/



-- 


====================================================================
Khalid Aziz                              Linux Systems Operation R&D
(970)898-9214                                        Hewlett-Packard
khalid@fc.hp.com                                    Fort Collins, CO
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/