I'm *storgly* recommending this patch to everyoby who wan't
to try 2.5.8 and has to use hdparm for a reasonable setup
of his system
Mon Apr 15 01:27:53 CEST 2002 ide-clean-34
- Synchronize with 2.5.8.
- Eliminate the cdrom_log_sense() function.
- Pass a struct request to cdrom_analyze_sense_data() since this is the entity
this function is working on. This shows nicely that this function is broken.
- Use CDROM_PACKET_SIZE where appropriate.
- Kill the obfuscating cmd_buf and cmd_len local variables from
cdrom_transfer_packet_command(). This made it obvious that the parameters of
this function where not adequate - to say the least. Fix this.
- Pass a packed command array directly to cdrom_queue_packed_command(). This
is reducing the number of places where we have to deal with the c member of
struct packet_command.
- Never pass NULL as sense to cdrom_lockdoor().
- Eliminate cdrom_do_block_pc().
- Eliminate the c member of struct packet_command. Pass them through struct
request cmd member.
- Don't enable TCQ unconditionally if there is a TCQ queue depth defined.
- Fix small think in ide_cmd_ioctl() rewrite. (My appologies to everyone who
has to use hdparm to setup his system...)
- Fix compilation without PCI support.
It's time for the next patch...
--------------060204050005050107020104
Content-Type: text/plain;
name="ide-clean-34.diff"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
filename="ide-clean-34.diff"
diff -urN linux-2.5.8/drivers/ide/ide-cd.c linux/drivers/ide/ide-cd.c
--- linux-2.5.8/drivers/ide/ide-cd.c Mon Apr 15 08:53:44 2002
+++ linux/drivers/ide/ide-cd.c Mon Apr 15 08:58:52 2002
@@ -1,6 +1,4 @@
/*
- * linux/drivers/ide/ide-cd.c
- *
* Copyright (C) 1994, 1995, 1996 scott snyder <snyder@fnald0.fnal.gov>
* Copyright (C) 1996-1998 Erik Andersen <andersee@debian.org>
* Copyright (C) 1998-2000 Jens Axboe <axboe@suse.de>
@@ -13,9 +11,10 @@
*
* Suggestions are welcome. Patches that work are more welcome though. ;-)
* For those wishing to work on this driver, please be sure you download
- * and comply with the latest Mt. Fuji (SFF8090 version 4) and ATAPI
- * (SFF-8020i rev 2.6) standards. These documents can be obtained by
+ * and comply with the latest Mt. Fuji (SFF8090 version 4) and ATAPI
+ * (SFF-8020i rev 2.6) standards. These documents can be obtained by
* anonymous ftp from:
+ *
* ftp://fission.dt.wdc.com/pub/standards/SFF_atapi/spec/SFF8020-r2.6/PS/8020r26.ps
* ftp://ftp.avc-pioneer.com/Mtfuji4/Spec/Fuji4r10.pdf
*
@@ -54,18 +53,18 @@
* Aztech drives, which seem to have the same problem.
* 2.04b May 30, 1995 -- Fix to match changes in ide.c version 3.16 -ml
* 2.05 Jun 8, 1995 -- Don't attempt to retry after an illegal request
- * or data protect error.
+ * or data protect error.
* Use HWIF and DEV_HWIF macros as in ide.c.
* Always try to do a request_sense after
- * a failed command.
+ * a failed command.
* Include an option to give textual descriptions
- * of ATAPI errors.
+ * of ATAPI errors.
* Fix a bug in handling the sector cache which
- * showed up if the drive returned data in 512 byte
- * blocks (like Pioneer drives). Thanks to
- * Richard Hirst <srh@gpt.co.uk> for diagnosing this.
+ * showed up if the drive returned data in 512 byte
+ * blocks (like Pioneer drives). Thanks to
+ * Richard Hirst <srh@gpt.co.uk> for diagnosing this.
* Properly supply the page number field in the
- * MODE_SELECT command.
+ * MODE_SELECT command.
* PLAYAUDIO12 is broken on the Aztech; work around it.
* 2.05x Aug 11, 1995 -- lots of data structure renaming/restructuring in ide.c
* (my apologies to Scott, but now ide-cd.c is independent)
@@ -74,28 +73,28 @@
* Use input_ide_data() and output_ide_data().
* Add door locking.
* Fix usage count leak in cdrom_open, which happened
- * when a read-write mount was attempted.
+ * when a read-write mount was attempted.
* Try to load the disk on open.
* Implement CDROMEJECT_SW ioctl (off by default).
* Read total cdrom capacity during open.
* Rearrange logic in cdrom_decode_status. Issue
- * request sense commands for failed packet commands
- * from here instead of from cdrom_queue_packet_command.
- * Fix a race condition in retrieving error information.
+ * request sense commands for failed packet commands
+ * from here instead of from cdrom_queue_packet_command.
+ * Fix a race condition in retrieving error information.
* Suppress printing normal unit attention errors and
- * some drive not ready errors.
+ * some drive not ready errors.
* Implement CDROMVOLREAD ioctl.
* Implement CDROMREADMODE1/2 ioctls.
* Fix race condition in setting up interrupt handlers
- * when the `serialize' option is used.
+ * when the `serialize' option is used.
* 3.01 Sep 2, 1995 -- Fix ordering of reenabling interrupts in
- * cdrom_queue_request.
+ * cdrom_queue_request.
* Another try at using ide_[input,output]_data.
* 3.02 Sep 16, 1995 -- Stick total disk capacity in partition table as well.
* Make VERBOSE_IDE_CD_ERRORS dump failed command again.
* Dump out more information for ILLEGAL REQUEST errs.
* Fix handling of errors occurring before the
- * packet command is transferred.
+ * packet command is transferred.
* Fix transfers with odd bytelengths.
* 3.03 Oct 27, 1995 -- Some Creative drives have an id of just `CD'.
* `DCI-2S10' drives are broken too.
@@ -103,17 +102,17 @@
* 3.05 Dec 1, 1995 -- Changes to go with overhaul of ide.c and ide-tape.c
* 3.06 Dec 16, 1995 -- Add support needed for partitions.
* More workarounds for Vertos bugs (based on patches
- * from Holger Dietze <dietze@aix520.informatik.uni-leipzig.de>).
+ * from Holger Dietze <dietze@aix520.informatik.uni-leipzig.de>).
* Try to eliminate byteorder assumptions.
* Use atapi_cdrom_subchnl struct definition.
* Add STANDARD_ATAPI compilation option.
* 3.07 Jan 29, 1996 -- More twiddling for broken drives: Sony 55D,
- * Vertos 300.
+ * Vertos 300.
* Add NO_DOOR_LOCKING configuration option.
* Handle drive_cmd requests w/NULL args (for hdparm -t).
* Work around sporadic Sony55e audio play problem.
* 3.07a Feb 11, 1996 -- check drive->id for NULL before dereferencing, to fix
- * problem with "hde=cdrom" with no drive present. -ml
+ * problem with "hde=cdrom" with no drive present. -ml
* 3.08 Mar 6, 1996 -- More Vertos workarounds.
* 3.09 Apr 5, 1996 -- Add CDROMCLOSETRAY ioctl.
* Switch to using MSF addressing for audio commands.
@@ -129,47 +128,47 @@
* 3.14 May 29, 1996 -- Add work-around for Vertos 600.
* (From Hennus Bergman <hennus@sky.ow.nl>.)
* 3.15 July 2, 1996 -- Added support for Sanyo 3 CD changers
- * from Ben Galliart <bgallia@luc.edu> with
- * special help from Jeff Lightfoot
- * <jeffml@pobox.com>
+ * from Ben Galliart <bgallia@luc.edu> with
+ * special help from Jeff Lightfoot
+ * <jeffml@pobox.com>
* 3.15a July 9, 1996 -- Improved Sanyo 3 CD changer identification
* 3.16 Jul 28, 1996 -- Fix from Gadi to reduce kernel stack usage for ioctl.
* 3.17 Sep 17, 1996 -- Tweak audio reads for some drives.
* Start changing CDROMLOADFROMSLOT to CDROM_SELECT_DISC.
* 3.18 Oct 31, 1996 -- Added module and DMA support.
- *
- *
+ *
+ *
* 4.00 Nov 5, 1996 -- New ide-cd maintainer,
- * Erik B. Andersen <andersee@debian.org>
+ * Erik B. Andersen <andersee@debian.org>
* -- Newer Creative drives don't always set the error
- * register correctly. Make sure we see media changes
- * regardless.
+ * register correctly. Make sure we see media changes
+ * regardless.
* -- Integrate with generic cdrom driver.
* -- CDROMGETSPINDOWN and CDROMSETSPINDOWN ioctls, based on
- * a patch from Ciro Cattuto <>.
+ * a patch from Ciro Cattuto <>.
* -- Call set_device_ro.
* -- Implement CDROMMECHANISMSTATUS and CDROMSLOTTABLE
- * ioctls, based on patch by Erik Andersen
+ * ioctls, based on patch by Erik Andersen
* -- Add some probes of drive capability during setup.
*
* 4.01 Nov 11, 1996 -- Split into ide-cd.c and ide-cd.h
- * -- Removed CDROMMECHANISMSTATUS and CDROMSLOTTABLE
- * ioctls in favor of a generalized approach
- * using the generic cdrom driver.
+ * -- Removed CDROMMECHANISMSTATUS and CDROMSLOTTABLE
+ * ioctls in favor of a generalized approach
+ * using the generic cdrom driver.
* -- Fully integrated with the 2.1.X kernel.
* -- Other stuff that I forgot (lots of changes)
*
* 4.02 Dec 01, 1996 -- Applied patch from Gadi Oxman <gadio@netvision.net.il>
- * to fix the drive door locking problems.
+ * to fix the drive door locking problems.
*
* 4.03 Dec 04, 1996 -- Added DSC overlap support.
- * 4.04 Dec 29, 1996 -- Added CDROMREADRAW ioclt based on patch
- * by Ales Makarov (xmakarov@sun.felk.cvut.cz)
+ * 4.04 Dec 29, 1996 -- Added CDROMREADRAW ioclt based on patch
+ * by Aleks Makarov (xmakarov@sun.felk.cvut.cz)
*
* 4.05 Nov 20, 1997 -- Modified to print more drive info on init
* Minor other changes
* Fix errors on CDROMSTOP (If you have a "Dolphin",
- * you must define IHAVEADOLPHIN)
+ * you must define IHAVEADOLPHIN)
* Added identifier so new Sanyo CD-changer works
* Better detection if door locking isn't supported
*
@@ -178,40 +177,40 @@
* 4.08 Dec 18, 1997 -- spew less noise when tray is empty
* -- fix speed display for ACER 24X, 18X
* 4.09 Jan 04, 1998 -- fix handling of the last block so we return
- * an end of file instead of an I/O error (Gadi)
+ * an end of file instead of an I/O error (Gadi)
* 4.10 Jan 24, 1998 -- fixed a bug so now changers can change to a new
- * slot when there is no disc in the current slot.
+ * slot when there is no disc in the current slot.
* -- Fixed a memory leak where info->changer_info was
- * malloc'ed but never free'd when closing the device.
+ * malloc'ed but never free'd when closing the device.
* -- Cleaned up the global namespace a bit by making more
- * functions static that should already have been.
+ * functions static that should already have been.
* 4.11 Mar 12, 1998 -- Added support for the CDROM_SELECT_SPEED ioctl
- * based on a patch for 2.0.33 by Jelle Foks
- * <jelle@scintilla.utwente.nl>, a patch for 2.0.33
- * by Toni Giorgino <toni@pcape2.pi.infn.it>, the SCSI
- * version, and my own efforts. -erik
+ * based on a patch for 2.0.33 by Jelle Foks
+ * <jelle@scintilla.utwente.nl>, a patch for 2.0.33
+ * by Toni Giorgino <toni@pcape2.pi.infn.it>, the SCSI
+ * version, and my own efforts. -erik
* -- Fixed a stupid bug which egcs was kind enough to
- * inform me of where "Illegal mode for this track"
- * was never returned due to a comparison on data
- * types of limited range.
- * 4.12 Mar 29, 1998 -- Fixed bug in CDROM_SELECT_SPEED so write speed is
- * now set ionly for CD-R and CD-RW drives. I had
- * removed this support because it produced errors.
- * It produced errors _only_ for non-writers. duh.
+ * inform me of where "Illegal mode for this track"
+ * was never returned due to a comparison on data
+ * types of limited range.
+ * 4.12 Mar 29, 1998 -- Fixed bug in CDROM_SELECT_SPEED so write speed is
+ * now set ionly for CD-R and CD-RW drives. I had
+ * removed this support because it produced errors.
+ * It produced errors _only_ for non-writers. duh.
* 4.13 May 05, 1998 -- Suppress useless "in progress of becoming ready"
- * messages, since this is not an error.
+ * messages, since this is not an error.
* -- Change error messages to be const
* -- Remove a "\t" which looks ugly in the syslogs
* 4.14 July 17, 1998 -- Change to pointing to .ps version of ATAPI spec
- * since the .pdf version doesn't seem to work...
+ * since the .pdf version doesn't seem to work...
* -- Updated the TODO list to something more current.
*
- * 4.15 Aug 25, 1998 -- Updated ide-cd.h to respect mechine endianess,
- * patch thanks to "Eddie C. Dost" <ecd@skynet.be>
+ * 4.15 Aug 25, 1998 -- Updated ide-cd.h to respect mechine endianess,
+ * patch thanks to "Eddie C. Dost" <ecd@skynet.be>
*
* 4.50 Oct 19, 1998 -- New maintainers!
- * Jens Axboe <axboe@image.dk>
- * Chris Zwilling <chris@cloudnet.com>
+ * Jens Axboe <axboe@image.dk>
+ * Chris Zwilling <chris@cloudnet.com>
*
* 4.51 Dec 23, 1998 -- Jens Axboe <axboe@image.dk>
* - ide_cdrom_reset enabled since the ide subsystem
@@ -224,17 +223,17 @@
* - Detect DVD-ROM/RAM drives
*
* 4.53 Feb 22, 1999 - Include other model Samsung and one Goldstar
- * drive in transfer size limit.
+ * drive in transfer size limit.
* - Fix the I/O error when doing eject without a medium
- * loaded on some drives.
+ * loaded on some drives.
* - CDROMREADMODE2 is now implemented through
- * CDROMREADRAW, since many drives don't support
- * MODE2 (even though ATAPI 2.6 says they must).
+ * CDROMREADRAW, since many drives don't support
+ * MODE2 (even though ATAPI 2.6 says they must).
* - Added ignore parameter to ide-cd (as a module), eg
- * insmod ide-cd ignore='hda hdb'
- * Useful when using ide-cd in conjunction with
- * ide-scsi. TODO: non-modular way of doing the
- * same.
+ * insmod ide-cd ignore='hda hdb'
+ * Useful when using ide-cd in conjunction with
+ * ide-scsi. TODO: non-modular way of doing the
+ * same.
*
* 4.54 Aug 5, 1999 - Support for MMC2 class commands through the generic
* packet interface to cdrom.c.
@@ -270,7 +269,7 @@
* - Mode sense and mode select moved to the
* Uniform layer.
* - Fixed a problem with WPI CDS-32X drive - it
- * failed the capabilities
+ * failed the capabilities
*
* 4.57 Apr 7, 2000 - Fixed sense reporting.
* - Fixed possible oops in ide_cdrom_get_last_session()
@@ -293,7 +292,7 @@
* Michael D Johnson <johnsom@orst.edu>
*
*************************************************************************/
-
+
#define IDECD_VERSION "4.59"
#include <linux/config.h>
@@ -326,63 +325,68 @@
static void cdrom_saw_media_change (ide_drive_t *drive)
{
struct cdrom_info *info = drive->driver_data;
-
+
CDROM_STATE_FLAGS (drive)->media_changed = 1;
CDROM_STATE_FLAGS (drive)->toc_valid = 0;
info->nsectors_buffered = 0;
}
-static int cdrom_log_sense(ide_drive_t *drive, struct packet_command *pc,
- struct request_sense *sense)
+static
+void cdrom_analyze_sense_data(ide_drive_t *drive, struct request *rq)
{
int log = 0;
+ /* FIXME --mdcki */
+ struct packet_command *pc = (struct packet_command *) rq->special;
+ struct packet_command *failed_command = (struct packet_command *) pc->sense;
+ struct request_sense *sense = (struct request_sense *) (pc->buffer - rq->cmd[4]);
+ unsigned char fail_cmd;
- if (sense == NULL || pc == NULL || pc->quiet)
- return 0;
+ if (sense == NULL || failed_command == NULL || failed_command->quiet)
+ return;
+ fail_cmd = rq->cmd[0];
+
+ /* Check whatever this error should be logged:
+ */
switch (sense->sense_key) {
- case NO_SENSE: case RECOVERED_ERROR:
+ case NO_SENSE:
+ case RECOVERED_ERROR:
break;
+
case NOT_READY:
- /*
- * don't care about tray state messages for
- * e.g. capacity commands or in-progress or
- * becoming ready
+
+ /* Don't care about tray state messages for e.g.
+ * capacity commands or in-progress or becoming ready.
*/
if (sense->asc == 0x3a || sense->asc == 0x04)
break;
log = 1;
break;
+
case UNIT_ATTENTION:
- /*
- * Make good and sure we've seen this potential media
+
+ /* Make good and sure we've seen this potential media
* change. Some drives (i.e. Creative) fail to present
* the correct sense key in the error register.
*/
cdrom_saw_media_change(drive);
break;
+
default:
log = 1;
break;
}
- return log;
-}
-
-static
-void cdrom_analyze_sense_data(ide_drive_t *drive,
- struct packet_command *failed_command,
- struct request_sense *sense)
-{
- if (!cdrom_log_sense(drive, failed_command, sense))
+ if (!log)
return;
/*
- * If a read toc is executed for a CD-R or CD-RW medium where
- * the first toc has not been recorded yet, it will fail with
- * 05/24/00 (which is a confusing error)
+ * If a read toc is executed for a CD-R or CD-RW medium where the first
+ * toc has not been recorded yet, it will fail with 05/24/00 (which is
+ * a confusing error).
*/
- if (failed_command && failed_command->c[0] == GPCMD_READ_TOC_PMA_ATIP)
+
+ if (fail_cmd == GPCMD_READ_TOC_PMA_ATIP)
if (sense->sense_key == 0x05 && sense->asc == 0x24)
return;
@@ -445,28 +449,26 @@
printk(" %s -- (asc=0x%02x, ascq=0x%02x)\n",
s, sense->asc, sense->ascq);
- if (failed_command != NULL) {
+ {
int lo=0, mid, hi= ARY_LEN (packet_command_texts);
s = NULL;
while (hi > lo) {
mid = (lo + hi) / 2;
- if (packet_command_texts[mid].packet_command ==
- failed_command->c[0]) {
+ if (packet_command_texts[mid].packet_command == fail_cmd) {
s = packet_command_texts[mid].text;
break;
}
- if (packet_command_texts[mid].packet_command >
- failed_command->c[0])
+ if (packet_command_texts[mid].packet_command > fail_cmd)
hi = mid;
else
lo = mid+1;
}
printk (" The failed \"%s\" packet command was: \n \"", s);
- for (i=0; i<sizeof (failed_command->c); i++)
- printk ("%02x ", failed_command->c[i]);
+ for (i=0; i < CDROM_PACKET_SIZE; i++)
+ printk ("%02x ", rq->cmd[i]);
printk ("\"\n");
}
@@ -495,7 +497,7 @@
}
}
-#else /* not VERBOSE_IDE_CD_ERRORS */
+#else
/* Suppress printing unit attention and `in progress of becoming ready'
errors when we're not being verbose. */
@@ -509,7 +511,7 @@
drive->name,
sense->error_code, sense->sense_key,
sense->asc, sense->ascq);
-#endif /* not VERBOSE_IDE_CD_ERRORS */
+#endif
}
static void cdrom_queue_request_sense(ide_drive_t *drive,
@@ -525,16 +527,20 @@
sense = &info->sense_data;
memset(pc, 0, sizeof(struct packet_command));
- pc->c[0] = GPCMD_REQUEST_SENSE;
- pc->c[4] = pc->buflen = 18;
- pc->buffer = (char *) sense;
+ pc->buffer = (void *) sense;
+ pc->buflen = 18;
pc->sense = (struct request_sense *) failed_command;
/* stuff the sense request in front of our current request */
rq = &info->request_sense_request;
+ rq->cmd[0] = GPCMD_REQUEST_SENSE;
+ rq->cmd[4] = pc->buflen;
ide_init_drive_cmd(rq);
rq->flags = REQ_SENSE;
+
+ /* FIXME --mdcki */
rq->special = (char *) pc;
+
rq->waiting = wait;
ide_do_drive_cmd(drive, rq, ide_preempt);
}
@@ -544,16 +550,13 @@
{
struct request *rq = HWGROUP(drive)->rq;
- if ((rq->flags & REQ_SENSE) && uptodate) {
- struct packet_command *pc = (struct packet_command *) rq->special;
- cdrom_analyze_sense_data(drive,
- (struct packet_command *) pc->sense,
- (struct request_sense *) (pc->buffer - pc->c[4]));
- }
+ if ((rq->flags & REQ_SENSE) && uptodate)
+ cdrom_analyze_sense_data(drive, rq);
if ((rq->flags & REQ_CMD) && !rq->current_nr_sectors)
uptodate = 1;
+ /* FIXME --mdcki */
HWGROUP(drive)->rq->special = NULL;
ide_end_request(drive, uptodate);
}
@@ -567,7 +570,7 @@
struct request *rq = HWGROUP(drive)->rq;
int stat, err, sense_key;
struct packet_command *pc;
-
+
/* Check for errors. */
stat = GET_STAT();
*stat_ret = stat;
@@ -590,6 +593,7 @@
from the drive (probably while trying
to recover from a former error). Just give up. */
+ /* FIXME --mdcki */
pc = (struct packet_command *) rq->special;
pc->stat = 1;
cdrom_end_request(drive, 1);
@@ -598,6 +602,8 @@
} else if (rq->flags & (REQ_PC | REQ_BLOCK_PC)) {
/* All other functions, except for READ. */
struct completion *wait = NULL;
+
+ /* FIXME --mdcki */
pc = (struct packet_command *) rq->special;
/* Check for tray open. */
@@ -612,15 +618,14 @@
/* Otherwise, print an error. */
ide_dump_status(drive, "packet command error", stat);
}
-
+
/* Set the error flag and complete the request.
- Then, if we have a CHECK CONDITION status,
- queue a request sense command. We must be careful,
- though: we don't want the thread in
- cdrom_queue_packet_command to wake up until
- the request sense has completed. We do this
- by transferring the semaphore from the packet
- command request to the request sense request. */
+ Then, if we have a CHECK CONDITION status, queue a request
+ sense command. We must be careful, though: we don't want
+ the thread in cdrom_queue_packet_command to wake up until
+ the request sense has completed. We do this by transferring
+ the semaphore from the packet command request to the request
+ sense request. */
if ((stat & ERR_STAT) != 0) {
wait = rq->waiting;
@@ -756,22 +761,15 @@
}
}
-/* Send a packet command to DRIVE described by CMD_BUF and CMD_LEN.
- The device registers must have already been prepared
- by cdrom_start_packet_command.
- HANDLER is the interrupt handler to call when the command completes
- or there's data ready. */
/*
- * changed 5 parameters to 3 for dvd-ram
- * struct packet_command *pc; now packet_command_t *pc;
+ * Send a packet command cmd to the drive. The device registers must have
+ * already been prepared by cdrom_start_packet_command. "handler" is the
+ * interrupt handler to call when the command completes or there's data ready.
*/
static ide_startstop_t cdrom_transfer_packet_command (ide_drive_t *drive,
- struct packet_command *pc,
- ide_handler_t *handler)
+ unsigned char *cmd, unsigned long timeout,
+ ide_handler_t *handler)
{
- unsigned char *cmd_buf = pc->c;
- int cmd_len = sizeof(pc->c);
- unsigned int timeout = pc->timeout;
ide_startstop_t startstop;
if (CDROM_CONFIG_FLAGS (drive)->drq_interrupt) {
@@ -780,20 +778,21 @@
int stat_dum;
/* Check for errors. */
- if (cdrom_decode_status (&startstop, drive, DRQ_STAT, &stat_dum))
+ if (cdrom_decode_status(&startstop, drive, DRQ_STAT, &stat_dum))
return startstop;
} else {
/* Otherwise, we must wait for DRQ to get set. */
- if (ide_wait_stat (&startstop, drive, DRQ_STAT, BUSY_STAT, WAIT_READY))
+ if (ide_wait_stat(&startstop, drive, DRQ_STAT, BUSY_STAT, WAIT_READY))
return startstop;
}
/* Arm the interrupt handler. */
BUG_ON(HWGROUP(drive)->handler);
- ide_set_handler (drive, handler, timeout, cdrom_timer_expiry);
+ ide_set_handler(drive, handler, timeout, cdrom_timer_expiry);
/* Send the command to the device. */
- atapi_output_bytes (drive, cmd_buf, cmd_len);
+ atapi_output_bytes(drive, cmd, CDROM_PACKET_SIZE);
+
return ide_started;
}
@@ -889,7 +888,7 @@
/*
* Interrupt routine. Called when a read request has completed.
*/
-static ide_startstop_t cdrom_read_intr (ide_drive_t *drive)
+static ide_startstop_t cdrom_read_intr(ide_drive_t *drive)
{
int stat;
int ireason, len, sectors_to_transfer, nskip;
@@ -908,7 +907,7 @@
if (cdrom_decode_status (&startstop, drive, 0, &stat))
return startstop;
-
+
if (dma) {
if (!dma_error) {
__ide_end_request(drive, 1, rq->nr_sectors);
@@ -1071,14 +1070,12 @@
}
/*
- * Routine to send a read packet command to the drive.
- * This is usually called directly from cdrom_start_read.
- * However, for drq_interrupt devices, it is called from an interrupt
- * when the drive is ready to accept the command.
+ * Routine to send a read packet command to the drive. This is usually called
+ * directly from cdrom_start_read. However, for drq_interrupt devices, it is
+ * called from an interrupt when the drive is ready to accept the command.
*/
-static ide_startstop_t cdrom_start_read_continuation (ide_drive_t *drive)
+static ide_startstop_t cdrom_start_read_continuation(ide_drive_t *drive)
{
- struct packet_command pc;
struct request *rq = HWGROUP(drive)->rq;
int nsect, sector, nframes, frame, nskip;
@@ -1117,15 +1114,11 @@
/* Largest number of frames was can transfer at once is 64k-1. For
some drives we need to limit this even more. */
- nframes = MIN (nframes, (CDROM_CONFIG_FLAGS (drive)->limit_nframes) ?
+ nframes = MIN(nframes, (CDROM_CONFIG_FLAGS (drive)->limit_nframes) ?
(65534 / CD_FRAMESIZE) : 65535);
- /* Set up the command */
- memcpy(pc.c, rq->cmd, sizeof(pc.c));
- pc.timeout = WAIT_CMD;
-
/* Send the command to the drive and return. */
- return cdrom_transfer_packet_command(drive, &pc, &cdrom_read_intr);
+ return cdrom_transfer_packet_command(drive, rq->cmd, WAIT_CMD, &cdrom_read_intr);
}
@@ -1161,7 +1154,7 @@
static ide_startstop_t cdrom_start_seek_continuation (ide_drive_t *drive)
{
- struct packet_command pc;
+ unsigned char cmd[CDROM_PACKET_SIZE];
struct request *rq = HWGROUP(drive)->rq;
int sector, frame, nskip;
@@ -1172,11 +1165,10 @@
frame = sector / SECTORS_PER_FRAME;
memset(rq->cmd, 0, sizeof(rq->cmd));
- pc.c[0] = GPCMD_SEEK;
- put_unaligned(cpu_to_be32(frame), (unsigned int *) &pc.c[2]);
+ cmd[0] = GPCMD_SEEK;
+ put_unaligned(cpu_to_be32(frame), (unsigned int *) &cmd[2]);
- pc.timeout = WAIT_CMD;
- return cdrom_transfer_packet_command(drive, &pc, &cdrom_seek_intr);
+ return cdrom_transfer_packet_command(drive, cmd, WAIT_CMD, &cdrom_seek_intr);
}
static ide_startstop_t cdrom_start_seek (ide_drive_t *drive, unsigned int block)
@@ -1243,15 +1235,13 @@
* Execute all other packet commands.
*/
-/* Forward declarations. */
-static int cdrom_lockdoor(ide_drive_t *drive, int lockflag,
- struct request_sense *sense);
-
/* Interrupt routine for packet command completion. */
static ide_startstop_t cdrom_pc_intr (ide_drive_t *drive)
{
int ireason, len, stat, thislen;
struct request *rq = HWGROUP(drive)->rq;
+
+ /* FIXME --mdcki */
struct packet_command *pc = (struct packet_command *) rq->special;
ide_startstop_t startstop;
@@ -1268,7 +1258,7 @@
if ((stat & DRQ_STAT) == 0) {
/* Some of the trailing request sense fields are optional, and
some drives don't send them. Sigh. */
- if (pc->c[0] == GPCMD_REQUEST_SENSE &&
+ if (rq->cmd[0] == GPCMD_REQUEST_SENSE &&
pc->buflen > 0 &&
pc->buflen <= 5) {
while (pc->buflen > 0) {
@@ -1346,24 +1336,29 @@
return ide_started;
}
-
-static ide_startstop_t cdrom_do_pc_continuation (ide_drive_t *drive)
+static ide_startstop_t cdrom_do_pc_continuation(ide_drive_t *drive)
{
struct request *rq = HWGROUP(drive)->rq;
+ unsigned long timeout;
+
+ /* FIXME --mdcki */
struct packet_command *pc = (struct packet_command *) rq->special;
- if (!pc->timeout)
- pc->timeout = WAIT_CMD;
+ if (pc->timeout)
+ timeout = pc->timeout;
+ else
+ timeout = WAIT_CMD;
/* Send the command to the drive and return. */
- return cdrom_transfer_packet_command(drive, pc, &cdrom_pc_intr);
+ return cdrom_transfer_packet_command(drive, rq->cmd, timeout, &cdrom_pc_intr);
}
-
static ide_startstop_t cdrom_do_packet_command (ide_drive_t *drive)
{
int len;
struct request *rq = HWGROUP(drive)->rq;
+
+ /* FIXME --mdcki */
struct packet_command *pc = (struct packet_command *) rq->special;
struct cdrom_info *info = drive->driver_data;
@@ -1391,23 +1386,28 @@
}
static
-int cdrom_queue_packet_command(ide_drive_t *drive, struct packet_command *pc)
+int cdrom_queue_packet_command(ide_drive_t *drive, unsigned char *cmd, struct packet_command *pc)
{
struct request_sense sense;
- struct request req;
+ struct request rq;
int retries = 10;
+ memcpy(rq.cmd, cmd, CDROM_PACKET_SIZE);
+
if (pc->sense == NULL)
pc->sense = &sense;
/* Start of retry loop. */
do {
- ide_init_drive_cmd (&req);
- req.flags = REQ_PC;
- req.special = (char *) pc;
- if (ide_do_drive_cmd (drive, &req, ide_wait)) {
+ ide_init_drive_cmd(&rq);
+
+ rq.flags = REQ_PC;
+
+ /* FIXME --mdcki */
+ rq.special = (void *) pc;
+ if (ide_do_drive_cmd(drive, &rq, ide_wait)) {
printk("%s: do_drive_cmd returned stat=%02x,err=%02x\n",
- drive->name, req.buffer[0], req.buffer[1]);
+ drive->name, rq.buffer[0], rq.buffer[1]);
/* FIXME: we should probably abort/retry or something */
}
if (pc->stat != 0) {
@@ -1493,7 +1493,7 @@
printk("ide-cd: write_intr decode_status bad\n");
return startstop;
}
-
+
/*
* using dma, transfer is complete now
*/
@@ -1573,20 +1573,9 @@
static ide_startstop_t cdrom_start_write_cont(ide_drive_t *drive)
{
- struct packet_command pc; /* packet_command_t pc; */
struct request *rq = HWGROUP(drive)->rq;
- unsigned nframes, frame;
-
- nframes = rq->nr_sectors >> 2;
- frame = rq->sector >> 2;
-
- memcpy(pc.c, rq->cmd, sizeof(pc.c));
-#if 0 /* the immediate bit */
- pc.c[1] = 1 << 3;
-#endif
- pc.timeout = 2 * WAIT_CMD;
- return cdrom_transfer_packet_command(drive, &pc, cdrom_write_intr);
+ return cdrom_transfer_packet_command(drive, rq->cmd, 2 * WAIT_CMD, cdrom_write_intr);
}
static ide_startstop_t cdrom_start_write(ide_drive_t *drive, struct request *rq)
@@ -1620,34 +1609,13 @@
return cdrom_start_packet_command(drive, 32768, cdrom_start_write_cont);
}
-/*
- * just wrap this around cdrom_do_packet_command
- */
-static ide_startstop_t cdrom_do_block_pc(ide_drive_t *drive, struct request *rq)
-{
- struct packet_command pc;
- ide_startstop_t startstop;
-
- memset(&pc, 0, sizeof(pc));
- memcpy(pc.c, rq->cmd, sizeof(pc.c));
- pc.quiet = 1;
- pc.timeout = 60 * HZ;
- rq->special = (char *) &pc;
-
- startstop = cdrom_do_packet_command(drive);
- if (pc.stat)
- rq->errors++;
-
- return startstop;
-}
-
#define IDE_LARGE_SEEK(b1,b2,t) (((b1) > (b2) + (t)) || ((b2) > (b1) + (t)))
/****************************************************************************
* cdrom driver request routine.
*/
static ide_startstop_t
-ide_do_rw_cdrom (ide_drive_t *drive, struct request *rq, unsigned long block)
+ide_do_rw_cdrom(ide_drive_t *drive, struct request *rq, unsigned long block)
{
ide_startstop_t action;
struct cdrom_info *info = drive->driver_data;
@@ -1679,18 +1647,31 @@
} else if (rq->flags & (REQ_PC | REQ_SENSE)) {
return cdrom_do_packet_command(drive);
} else if (rq->flags & REQ_SPECIAL) {
-
/*
- * FIXME: Kill REQ_SEPCIAL and replace it will command commands
- * queued at the request queue instead as suggested (abd
- * rightly so) by Linus.
+ * FIXME: Kill REQ_SEPCIAL and replace it with commands queued
+ * at the request queue instead as suggested by Linus.
*
* right now this can only be a reset...
*/
- cdrom_end_request(drive, 1); return ide_stopped;
+ cdrom_end_request(drive, 1);
+ return ide_stopped;
} else if (rq->flags & REQ_BLOCK_PC) {
- return cdrom_do_block_pc(drive, rq);
+ struct packet_command pc;
+ ide_startstop_t startstop;
+
+ memset(&pc, 0, sizeof(pc));
+ pc.quiet = 1;
+ pc.timeout = 60 * HZ;
+
+ /* FIXME --mdcki */
+ rq->special = (char *) &pc;
+
+ startstop = cdrom_do_packet_command(drive);
+ if (pc.stat)
+ ++rq->errors;
+
+ return startstop;
}
blk_dump_rq_flags(rq, "ide-cd bad flags");
@@ -1755,6 +1736,7 @@
static int cdrom_check_status(ide_drive_t *drive, struct request_sense *sense)
{
+ unsigned char cmd[CDROM_PACKET_SIZE];
struct packet_command pc;
struct cdrom_info *info = drive->driver_data;
struct cdrom_device_info *cdi = &info->devinfo;
@@ -1762,16 +1744,16 @@
memset(&pc, 0, sizeof(pc));
pc.sense = sense;
- pc.c[0] = GPCMD_TEST_UNIT_READY;
+ cmd[0] = GPCMD_TEST_UNIT_READY;
-#if ! STANDARD_ATAPI
- /* the Sanyo 3 CD changer uses byte 7 of TEST_UNIT_READY to
+#if !STANDARD_ATAPI
+ /* the Sanyo 3 CD changer uses byte 7 of TEST_UNIT_READY to
switch CDs instead of supporting the LOAD_UNLOAD opcode */
- pc.c[7] = cdi->sanyo_slot % 3;
-#endif /* not STANDARD_ATAPI */
+ cmd[7] = cdi->sanyo_slot % 3;
+#endif
- return cdrom_queue_packet_command(drive, &pc);
+ return cdrom_queue_packet_command(drive, cmd, &pc);
}
@@ -1779,22 +1761,20 @@
static int
cdrom_lockdoor(ide_drive_t *drive, int lockflag, struct request_sense *sense)
{
- struct request_sense my_sense;
struct packet_command pc;
int stat;
- if (sense == NULL)
- sense = &my_sense;
-
/* If the drive cannot lock the door, just pretend. */
if (CDROM_CONFIG_FLAGS(drive)->no_doorlock) {
stat = 0;
} else {
+ unsigned char cmd[CDROM_PACKET_SIZE];
+
memset(&pc, 0, sizeof(pc));
pc.sense = sense;
- pc.c[0] = GPCMD_PREVENT_ALLOW_MEDIUM_REMOVAL;
- pc.c[4] = lockflag ? 1 : 0;
- stat = cdrom_queue_packet_command (drive, &pc);
+ cmd[0] = GPCMD_PREVENT_ALLOW_MEDIUM_REMOVAL;
+ cmd[4] = lockflag ? 1 : 0;
+ stat = cdrom_queue_packet_command(drive, cmd, &pc);
}
/* If we got an illegal field error, the drive
@@ -1807,7 +1787,7 @@
CDROM_CONFIG_FLAGS (drive)->no_doorlock = 1;
stat = 0;
}
-
+
/* no medium, that's alright. */
if (stat != 0 && sense->sense_key == NOT_READY && sense->asc == 0x3a)
stat = 0;
@@ -1825,10 +1805,11 @@
struct request_sense *sense)
{
struct packet_command pc;
+ unsigned char cmd[CDROM_PACKET_SIZE];
if (CDROM_CONFIG_FLAGS(drive)->no_eject && !ejectflag)
return -EDRIVE_CANT_DO_THIS;
-
+
/* reload fails on some drives, if the tray is locked */
if (CDROM_STATE_FLAGS(drive)->door_locked && ejectflag)
return 0;
@@ -1836,9 +1817,9 @@
memset(&pc, 0, sizeof (pc));
pc.sense = sense;
- pc.c[0] = GPCMD_START_STOP_UNIT;
- pc.c[4] = 0x02 + (ejectflag != 0);
- return cdrom_queue_packet_command (drive, &pc);
+ cmd[0] = GPCMD_START_STOP_UNIT;
+ cmd[4] = 0x02 + (ejectflag != 0);
+ return cdrom_queue_packet_command(drive, cmd, &pc);
}
static int cdrom_read_capacity(ide_drive_t *drive, unsigned long *capacity,
@@ -1850,16 +1831,16 @@
} capbuf;
int stat;
+ unsigned char cmd[CDROM_PACKET_SIZE];
struct packet_command pc;
memset(&pc, 0, sizeof(pc));
pc.sense = sense;
- pc.c[0] = GPCMD_READ_CDVD_CAPACITY;
+ cmd[0] = GPCMD_READ_CDVD_CAPACITY;
pc.buffer = (char *)&capbuf;
pc.buflen = sizeof(capbuf);
-
- stat = cdrom_queue_packet_command(drive, &pc);
+ stat = cdrom_queue_packet_command(drive, cmd, &pc);
if (stat == 0)
*capacity = 1 + be32_to_cpu(capbuf.lba);
@@ -1870,6 +1851,7 @@
int format, char *buf, int buflen,
struct request_sense *sense)
{
+ unsigned char cmd[CDROM_PACKET_SIZE];
struct packet_command pc;
memset(&pc, 0, sizeof(pc));
@@ -1878,16 +1860,16 @@
pc.buffer = buf;
pc.buflen = buflen;
pc.quiet = 1;
- pc.c[0] = GPCMD_READ_TOC_PMA_ATIP;
- pc.c[6] = trackno;
- pc.c[7] = (buflen >> 8);
- pc.c[8] = (buflen & 0xff);
- pc.c[9] = (format << 6);
+ cmd[0] = GPCMD_READ_TOC_PMA_ATIP;
if (msf_flag)
- pc.c[1] = 2;
+ cmd[1] = 2;
+ cmd[6] = trackno;
+ cmd[7] = (buflen >> 8);
+ cmd[8] = (buflen & 0xff);
+ cmd[9] = (format << 6);
- return cdrom_queue_packet_command (drive, &pc);
+ return cdrom_queue_packet_command(drive, cmd, &pc);
}
@@ -1916,7 +1898,7 @@
/* Check to see if the existing data is still valid.
If it is, just return. */
- (void) cdrom_check_status(drive, sense);
+ cdrom_check_status(drive, sense);
if (CDROM_STATE_FLAGS(drive)->toc_valid)
return 0;
@@ -2049,6 +2031,7 @@
static int cdrom_read_subchannel(ide_drive_t *drive, int format, char *buf,
int buflen, struct request_sense *sense)
{
+ unsigned char cmd[CDROM_PACKET_SIZE];
struct packet_command pc;
memset(&pc, 0, sizeof(pc));
@@ -2056,13 +2039,14 @@
pc.buffer = buf;
pc.buflen = buflen;
- pc.c[0] = GPCMD_READ_SUBCHANNEL;
- pc.c[1] = 2; /* MSF addressing */
- pc.c[2] = 0x40; /* request subQ data */
- pc.c[3] = format;
- pc.c[7] = (buflen >> 8);
- pc.c[8] = (buflen & 0xff);
- return cdrom_queue_packet_command(drive, &pc);
+ cmd[0] = GPCMD_READ_SUBCHANNEL;
+ cmd[1] = 2; /* MSF addressing */
+ cmd[2] = 0x40; /* request subQ data */
+ cmd[3] = format;
+ cmd[7] = (buflen >> 8);
+ cmd[8] = (buflen & 0xff);
+
+ return cdrom_queue_packet_command(drive, cmd, &pc);
}
/* ATAPI cdrom drives are free to select the speed you request or any slower
@@ -2070,6 +2054,7 @@
static int cdrom_select_speed(ide_drive_t *drive, int speed,
struct request_sense *sense)
{
+ unsigned char cmd[CDROM_PACKET_SIZE];
struct packet_command pc;
memset(&pc, 0, sizeof(pc));
pc.sense = sense;
@@ -2079,36 +2064,37 @@
else
speed *= 177; /* Nx to kbytes/s */
- pc.c[0] = GPCMD_SET_SPEED;
+ cmd[0] = GPCMD_SET_SPEED;
/* Read Drive speed in kbytes/second MSB */
- pc.c[2] = (speed >> 8) & 0xff;
+ cmd[2] = (speed >> 8) & 0xff;
/* Read Drive speed in kbytes/second LSB */
- pc.c[3] = speed & 0xff;
+ cmd[3] = speed & 0xff;
if (CDROM_CONFIG_FLAGS(drive)->cd_r ||
CDROM_CONFIG_FLAGS(drive)->cd_rw ||
CDROM_CONFIG_FLAGS(drive)->dvd_r) {
/* Write Drive speed in kbytes/second MSB */
- pc.c[4] = (speed >> 8) & 0xff;
+ cmd[4] = (speed >> 8) & 0xff;
/* Write Drive speed in kbytes/second LSB */
- pc.c[5] = speed & 0xff;
+ cmd[5] = speed & 0xff;
}
- return cdrom_queue_packet_command(drive, &pc);
+ return cdrom_queue_packet_command(drive, cmd, &pc);
}
static int cdrom_play_audio(ide_drive_t *drive, int lba_start, int lba_end)
{
struct request_sense sense;
+ unsigned char cmd[CDROM_PACKET_SIZE];
struct packet_command pc;
memset(&pc, 0, sizeof (pc));
pc.sense = &sense;
- pc.c[0] = GPCMD_PLAY_AUDIO_MSF;
- lba_to_msf(lba_start, &pc.c[3], &pc.c[4], &pc.c[5]);
- lba_to_msf(lba_end-1, &pc.c[6], &pc.c[7], &pc.c[8]);
+ cmd[0] = GPCMD_PLAY_AUDIO_MSF;
+ lba_to_msf(lba_start, &cmd[3], &cmd[4], &cmd[5]);
+ lba_to_msf(lba_end-1, &cmd[6], &cmd[7], &cmd[8]);
- return cdrom_queue_packet_command(drive, &pc);
+ return cdrom_queue_packet_command(drive, cmd, &pc);
}
static int cdrom_get_toc_entry(ide_drive_t *drive, int track,
@@ -2152,15 +2138,15 @@
layer. the packet must be complete, as we do not
touch it at all. */
memset(&pc, 0, sizeof(pc));
- memcpy(pc.c, cgc->cmd, CDROM_PACKET_SIZE);
pc.buffer = cgc->buffer;
pc.buflen = cgc->buflen;
pc.quiet = cgc->quiet;
pc.timeout = cgc->timeout;
pc.sense = cgc->sense;
- cgc->stat = cdrom_queue_packet_command(drive, &pc);
+ cgc->stat = cdrom_queue_packet_command(drive, cgc->cmd, &pc);
if (!cgc->stat)
cgc->buflen -= pc.buflen;
+
return cgc->stat;
}
@@ -2177,34 +2163,34 @@
/* These will be moved into the Uniform layer shortly... */
switch (cmd) {
- case CDROMSETSPINDOWN: {
- char spindown;
-
- if (copy_from_user(&spindown, (void *) arg, sizeof(char)))
+ case CDROMSETSPINDOWN: {
+ char spindown;
+
+ if (copy_from_user(&spindown, (void *) arg, sizeof(char)))
return -EFAULT;
-
+
if ((stat = cdrom_mode_sense(cdi, &cgc, GPMODE_CDROM_PAGE, 0)))
return stat;
- buffer[11] = (buffer[11] & 0xf0) | (spindown & 0x0f);
+ buffer[11] = (buffer[11] & 0xf0) | (spindown & 0x0f);
+
+ return cdrom_mode_select(cdi, &cgc);
+ }
+
+ case CDROMGETSPINDOWN: {
+ char spindown;
- return cdrom_mode_select(cdi, &cgc);
- }
-
- case CDROMGETSPINDOWN: {
- char spindown;
-
if ((stat = cdrom_mode_sense(cdi, &cgc, GPMODE_CDROM_PAGE, 0)))
return stat;
-
- spindown = buffer[11] & 0x0f;
-
+
+ spindown = buffer[11] & 0x0f;
+
if (copy_to_user((void *) arg, &spindown, sizeof (char)))
return -EFAULT;
-
- return 0;
- }
-
+
+ return 0;
+ }
+
default:
return -EINVAL;
}
@@ -2214,7 +2200,6 @@
static
int ide_cdrom_audio_ioctl (struct cdrom_device_info *cdi,
unsigned int cmd, void *arg)
-
{
ide_drive_t *drive = (ide_drive_t*) cdi->handle;
struct cdrom_info *info = drive->driver_data;
@@ -2306,31 +2291,34 @@
* lock it again.
*/
if (CDROM_STATE_FLAGS(drive)->door_locked)
- (void) cdrom_lockdoor(drive, 1, &sense);
+ cdrom_lockdoor(drive, 1, &sense);
return ret;
}
static
-int ide_cdrom_tray_move (struct cdrom_device_info *cdi, int position)
+int ide_cdrom_tray_move(struct cdrom_device_info *cdi, int position)
{
ide_drive_t *drive = (ide_drive_t*) cdi->handle;
struct request_sense sense;
if (position) {
int stat = cdrom_lockdoor(drive, 0, &sense);
- if (stat) return stat;
+ if (stat)
+ return stat;
}
return cdrom_eject(drive, !position, &sense);
}
static
-int ide_cdrom_lock_door (struct cdrom_device_info *cdi, int lock)
+int ide_cdrom_lock_door(struct cdrom_device_info *cdi, int lock)
{
ide_drive_t *drive = (ide_drive_t*) cdi->handle;
- return cdrom_lockdoor(drive, lock, NULL);
+ struct request_sense sense;
+
+ return cdrom_lockdoor(drive, lock, &sense);
}
static
@@ -2433,9 +2421,9 @@
{
ide_drive_t *drive = (ide_drive_t*) cdi->handle;
int retval;
-
+
if (slot_nr == CDSL_CURRENT) {
- (void) cdrom_check_status(drive, NULL);
+ cdrom_check_status(drive, NULL);
retval = CDROM_STATE_FLAGS (drive)->media_changed;
CDROM_STATE_FLAGS (drive)->media_changed = 0;
return retval;
@@ -2502,7 +2490,7 @@
*(int *)&devinfo->capacity = nslots;
devinfo->handle = (void *) drive;
strcpy(devinfo->name, drive->name);
-
+
/* set capability mask to match the probe. */
if (!CDROM_CONFIG_FLAGS (drive)->cd_r)
devinfo->mask |= CDC_CD_R;
@@ -2578,8 +2566,8 @@
int nslots = 1;
if (CDROM_CONFIG_FLAGS (drive)->nec260) {
- CDROM_CONFIG_FLAGS (drive)->no_eject = 0;
- CDROM_CONFIG_FLAGS (drive)->audio_play = 1;
+ CDROM_CONFIG_FLAGS (drive)->no_eject = 0;
+ CDROM_CONFIG_FLAGS (drive)->audio_play = 1;
return nslots;
}
@@ -2632,14 +2620,14 @@
/* The ACER/AOpen 24X cdrom has the speed fields byte-swapped */
if (drive->id && !drive->id->model[0] && !strncmp(drive->id->fw_rev, "241N", 4)) {
- CDROM_STATE_FLAGS (drive)->current_speed =
+ CDROM_STATE_FLAGS (drive)->current_speed =
(((unsigned int)cap.curspeed) + (176/2)) / 176;
- CDROM_CONFIG_FLAGS (drive)->max_speed =
+ CDROM_CONFIG_FLAGS (drive)->max_speed =
(((unsigned int)cap.maxspeed) + (176/2)) / 176;
} else {
- CDROM_STATE_FLAGS (drive)->current_speed =
+ CDROM_STATE_FLAGS (drive)->current_speed =
(ntohs(cap.curspeed) + (176/2)) / 176;
- CDROM_CONFIG_FLAGS (drive)->max_speed =
+ CDROM_CONFIG_FLAGS (drive)->max_speed =
(ntohs(cap.maxspeed) + (176/2)) / 176;
}
@@ -2651,19 +2639,19 @@
printk(" %s", CDROM_CONFIG_FLAGS(drive)->dvd ? "DVD-ROM" : "CD-ROM");
if (CDROM_CONFIG_FLAGS (drive)->dvd_r|CDROM_CONFIG_FLAGS (drive)->dvd_ram)
- printk (" DVD%s%s",
- (CDROM_CONFIG_FLAGS (drive)->dvd_r)? "-R" : "",
- (CDROM_CONFIG_FLAGS (drive)->dvd_ram)? "-RAM" : "");
-
- if (CDROM_CONFIG_FLAGS (drive)->cd_r|CDROM_CONFIG_FLAGS (drive)->cd_rw)
- printk (" CD%s%s",
- (CDROM_CONFIG_FLAGS (drive)->cd_r)? "-R" : "",
- (CDROM_CONFIG_FLAGS (drive)->cd_rw)? "/RW" : "");
-
- if (CDROM_CONFIG_FLAGS (drive)->is_changer)
- printk (" changer w/%d slots", nslots);
- else
- printk (" drive");
+ printk (" DVD%s%s",
+ (CDROM_CONFIG_FLAGS (drive)->dvd_r)? "-R" : "",
+ (CDROM_CONFIG_FLAGS (drive)->dvd_ram)? "-RAM" : "");
+
+ if (CDROM_CONFIG_FLAGS (drive)->cd_r|CDROM_CONFIG_FLAGS (drive)->cd_rw)
+ printk (" CD%s%s",
+ (CDROM_CONFIG_FLAGS (drive)->cd_r)? "-R" : "",
+ (CDROM_CONFIG_FLAGS (drive)->cd_rw)? "/RW" : "");
+
+ if (CDROM_CONFIG_FLAGS (drive)->is_changer)
+ printk (" changer w/%d slots", nslots);
+ else
+ printk (" drive");
printk (", %dkB Cache", be16_to_cpu(cap.buffer_size));
@@ -2678,7 +2666,8 @@
static void ide_cdrom_add_settings(ide_drive_t *drive)
{
- ide_add_setting(drive, "dsc_overlap", SETTING_RW, -1, -1, TYPE_BYTE, 0, 1, 1, 1, &drive->dsc_overlap, NULL);
+ ide_add_setting(drive, "dsc_overlap",
+ SETTING_RW, -1, -1, TYPE_BYTE, 0, 1, 1, 1, &drive->dsc_overlap, NULL);
}
static
@@ -2728,7 +2717,7 @@
CDROM_CONFIG_FLAGS (drive)->supp_disc_present = 0;
CDROM_CONFIG_FLAGS (drive)->audio_play = 0;
CDROM_CONFIG_FLAGS (drive)->close_tray = 1;
-
+
/* limit transfer size per interrupt. */
CDROM_CONFIG_FLAGS (drive)->limit_nframes = 0;
if (drive->id != NULL) {
@@ -2763,16 +2752,12 @@
CDROM_CONFIG_FLAGS (drive)->tocaddr_as_bcd = 1;
CDROM_CONFIG_FLAGS (drive)->playmsf_as_bcd = 1;
CDROM_CONFIG_FLAGS (drive)->subchan_as_bcd = 1;
- }
-
- else if (strcmp (drive->id->model, "V006E0DS") == 0 &&
+ } else if (strcmp (drive->id->model, "V006E0DS") == 0 &&
drive->id->fw_rev[4] == '1' &&
drive->id->fw_rev[6] <= '2') {
/* Vertos 600 ESD. */
CDROM_CONFIG_FLAGS (drive)->toctracks_as_bcd = 1;
- }
-
- else if (strcmp (drive->id->model,
+ } else if (strcmp (drive->id->model,
"NEC CD-ROM DRIVE:260") == 0 &&
strncmp (drive->id->fw_rev, "1.01", 4) == 0) { /* FIXME */
/* Old NEC260 (not R).
@@ -2782,9 +2767,7 @@
CDROM_CONFIG_FLAGS (drive)->playmsf_as_bcd = 1;
CDROM_CONFIG_FLAGS (drive)->subchan_as_bcd = 1;
CDROM_CONFIG_FLAGS (drive)->nec260 = 1;
- }
-
- else if (strcmp (drive->id->model, "WEARNES CDD-120") == 0 &&
+ } else if (strcmp (drive->id->model, "WEARNES CDD-120") == 0 &&
strncmp (drive->id->fw_rev, "A1.1", 4) == 0) { /* FIXME */
/* Wearnes */
CDROM_CONFIG_FLAGS (drive)->playmsf_as_bcd = 1;
@@ -2989,7 +2972,7 @@
kfree (info);
continue;
}
- memset (info, 0, sizeof (struct cdrom_info));
+ memset(info, 0, sizeof (struct cdrom_info));
drive->driver_data = info;
MOD_INC_USE_COUNT;
diff -urN linux-2.5.8/drivers/ide/ide-cd.h linux/drivers/ide/ide-cd.h
--- linux-2.5.8/drivers/ide/ide-cd.h Mon Mar 18 21:37:18 2002
+++ linux/drivers/ide/ide-cd.h Mon Apr 15 09:11:15 2002
@@ -15,7 +15,7 @@
memory, though. */
#ifndef VERBOSE_IDE_CD_ERRORS
-#define VERBOSE_IDE_CD_ERRORS 1
+# define VERBOSE_IDE_CD_ERRORS 1
#endif
@@ -24,7 +24,7 @@
this will give you a slightly smaller kernel. */
#ifndef STANDARD_ATAPI
-#define STANDARD_ATAPI 0
+# define STANDARD_ATAPI 0
#endif
@@ -32,14 +32,14 @@
This is apparently needed for supermount. */
#ifndef NO_DOOR_LOCKING
-#define NO_DOOR_LOCKING 0
+# define NO_DOOR_LOCKING 0
#endif
/************************************************************************/
-#define SECTOR_BITS 9
+#define SECTOR_BITS 9
#ifndef SECTOR_SIZE
-#define SECTOR_SIZE (1 << SECTOR_BITS)
+# define SECTOR_SIZE (1 << SECTOR_BITS)
#endif
#define SECTORS_PER_FRAME (CD_FRAMESIZE >> SECTOR_BITS)
#define SECTOR_BUFFER_SIZE (CD_FRAMESIZE * 32)
@@ -50,12 +50,6 @@
#define MIN(a,b) ((a) < (b) ? (a) : (b))
-/* special command codes for strategy routine. */
-#define PACKET_COMMAND 4315
-#define REQUEST_SENSE_COMMAND 4316
-#define RESET_DRIVE_COMMAND 4317
-
-
/* Configuration flags. These describe the capabilities of the drive.
They generally do not change after initialization, unless we learn
more about the drive from stuff failing. */
@@ -90,7 +84,6 @@
};
#define CDROM_CONFIG_FLAGS(drive) (&(((struct cdrom_info *)(drive->driver_data))->config_flags))
-
/* State flags. These give information about the current state of the
drive, and will change during normal operation. */
struct ide_cd_state_flags {
@@ -111,24 +104,23 @@
int quiet;
int timeout;
struct request_sense *sense;
- unsigned char c[12];
};
/* Structure of a MSF cdrom address. */
struct atapi_msf {
- byte reserved;
- byte minute;
- byte second;
- byte frame;
-};
+ u8 __reserved;
+ u8 minute;
+ u8 second;
+ u8 frame;
+} __attribute__((packed));
/* Space to hold the disk TOC. */
#define MAX_TRACKS 99
struct atapi_toc_header {
- unsigned short toc_length;
- byte first_track;
- byte last_track;
-};
+ u16 toc_length;
+ u8 first_track;
+ u8 last_track;
+} __attribute__((packed));
struct atapi_toc_entry {
byte reserved1;
@@ -162,17 +154,17 @@
/* This structure is annoyingly close to, but not identical with,
the cdrom_subchnl structure from cdrom.h. */
struct atapi_cdrom_subchnl {
- u_char acdsc_reserved;
- u_char acdsc_audiostatus;
- u_short acdsc_length;
- u_char acdsc_format;
+ u8 acdsc_reserved;
+ u8 acdsc_audiostatus;
+ u16 acdsc_length;
+ u8 acdsc_format;
#if defined(__BIG_ENDIAN_BITFIELD)
- u_char acdsc_ctrl: 4;
- u_char acdsc_adr: 4;
+ u8 acdsc_ctrl: 4;
+ u8 acdsc_adr: 4;
#elif defined(__LITTLE_ENDIAN_BITFIELD)
- u_char acdsc_adr: 4;
- u_char acdsc_ctrl: 4;
+ u8 acdsc_adr: 4;
+ u8 acdsc_ctrl: 4;
#else
#error "Please fix <asm/byteorder.h>"
#endif
diff -urN linux-2.5.8/drivers/ide/ide-taskfile.c linux/drivers/ide/ide-taskfile.c
--- linux-2.5.8/drivers/ide/ide-taskfile.c Mon Apr 15 08:53:44 2002
+++ linux/drivers/ide/ide-taskfile.c Mon Apr 15 10:01:31 2002
@@ -980,7 +980,7 @@
/* FIXME: Do we really have to zero out the buffer?
*/
- memset(argbuf, 0, 4 + SECTOR_WORDS * 4 * vals[3]);
+ memset(argbuf, 4, SECTOR_WORDS * 4 * vals[3]);
ide_init_drive_cmd(&rq);
rq.buffer = argbuf;
memcpy(argbuf, vals, 4);
diff -urN linux-2.5.8/drivers/ide/ide.c linux/drivers/ide/ide.c
--- linux-2.5.8/drivers/ide/ide.c Mon Apr 15 08:53:44 2002
+++ linux/drivers/ide/ide.c Mon Apr 15 10:17:15 2002
@@ -2701,7 +2701,11 @@
void ide_teardown_commandlist(ide_drive_t *drive)
{
- struct pci_dev *pdev= drive->channel->pci_dev;
+#ifdef CONFIG_BLK_DEV_IDEPCI
+ struct pci_dev *pdev = drive->channel->pci_dev;
+#else
+ struct pci_dev *pdev = NULL;
+#endif
struct list_head *entry;
list_for_each(entry, &drive->free_req) {
@@ -2716,7 +2720,11 @@
int ide_build_commandlist(ide_drive_t *drive)
{
- struct pci_dev *pdev= drive->channel->pci_dev;
+#ifdef CONFIG_BLK_DEV_IDEPCI
+ struct pci_dev *pdev = drive->channel->pci_dev;
+#else
+ struct pci_dev *pdev = NULL;
+#endif
struct ata_request *ar;
ide_tag_info_t *tcq;
int i, err;
@@ -2764,9 +2772,9 @@
if (i) {
drive->queue_depth = i;
if (i >= 1) {
- drive->using_tcq = 1;
drive->tcq->queued = 0;
drive->tcq->active_tag = -1;
+
return 0;
}
--------------060204050005050107020104--
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/