Re: RAID superblock confusion
Richard Gooch (rgooch@ras.ucalgary.ca)
Wed, 10 Apr 2002 15:39:09 -0600
Mike Fedyk writes:
> On Wed, Apr 10, 2002 at 02:37:48PM -0600, Richard Gooch wrote:
> > Andreas Dilger writes:
> > > On Apr 10, 2002 13:24 -0600, Richard Gooch wrote:
> > > > Andreas Dilger writes:
> > > > > On Apr 10, 2002 09:33 -0600, Richard Gooch wrote:
> > > > > > Even though I'm using persistent superblockss, which is supposed to
> > > > > > allow one to move devices from one controller to another, I can't
> > > > > > use my RAID) set in this configuration. Looks like a bug.
> > > > > >
> > > > > > md0: former device scsi/host2/bus0/target1/lun0/part2 is unavailable,
> > > > > > removing from array!
> > > > > > md: md0, array needs 6 disks, has 5, aborting.
> > > > >
> > > > > Note that this appears to be your real problem.
> > > >
> > > > No. I tested all 6 partitions used in the RAID set. They are all
> > > > available.
> > >
> > > Well, MD seems to think it is unavailable... I would check the
> > > codepath that generates this message and see why it is happening.
> > > Maybe it is a timing issue or something, that MD autostart is
> > > starting before this device is set up or something? I don't know.
> >
> > The device is set up (i.e. SCSI host driver is loaded) long before I
> > do raidstart /dev/md/0
>
> But kernel auto-detection doesn't depend on the raidstart command. If
> things are setup correctly, you can remove that from your init scripts.
I'm not (explicitely) using auto-detection. When I insmod the raid0
module, there are no messages about finding devices. All I get is:
md: raid0 personality registered as nr 2
Only when I run raidstart do I get kernel messages about the devices.
In any case, I should be able to move my devices around (especially
if /etc/raidtab is still correct), whether or not autostart is
running. The behaviour I'm observing is a bug (I assume it's not a
mis-feature, since the raidstart man page tells me that moving devices
around should be safe).
Regards,
Richard....
Permanent: rgooch@atnf.csiro.au
Current: rgooch@ras.ucalgary.ca
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/