As of this morning, 2.5.7. Before that 2.4.{17,18,19-pre*ac*} for some months.
> What
> hardware?
Dual pentium III (Katmai)
sean@henry:~$ lspci
00:00.0 Host bridge: Intel Corporation 440BX/ZX - 82443BX/ZX Host bridge (rev 02)
00:01.0 PCI bridge: Intel Corporation 440BX/ZX - 82443BX/ZX AGP bridge (rev 02)
00:04.0 ISA bridge: Intel Corporation 82371AB PIIX4 ISA (rev 02)
00:04.1 IDE interface: Intel Corporation 82371AB PIIX4 IDE (rev 01)
00:04.2 USB Controller: Intel Corporation 82371AB PIIX4 USB (rev 01)
00:04.3 Bridge: Intel Corporation 82371AB PIIX4 ACPI (rev 02)
00:06.0 SCSI storage controller: Adaptec AHA-2940U2/W / 7890
00:09.0 Multimedia audio controller: Creative Labs SB Live! EMU10000 (rev 04)
00:09.1 Input device controller: Creative Labs SB Live! (rev 01)
00:0b.0 Ethernet controller: Intel Corporation 82557 [Ethernet Pro 100] (rev 05)
00:0c.0 Ethernet controller: VIA Technologies, Inc. VT86C100A [Rhine 10/100] (rev 06)
01:00.0 VGA compatible controller: 3Dfx Interactive, Inc. Voodoo 3 (rev 01)
All scsi disks. IDE cd-writer. More-or-less redhat 7.x distro with most of
the interesting daemons replaced, and some legacy cruft still intact.
I don't use ACPI or devfs or framebuffer console, not that any of those should
affect this.
Sean
>
> Geoffeg
>
> This one time, at band camp, Sean Hunter wrote:
> > Just a data point: I have been using multiple tmpfs bind mounts for some time
> > on smp without this problem.
> >
> > none on /dev/shm type tmpfs (rw,nosuid,nodev,mode=1777,size=256M)
> > /dev/shm on /tmp type none (rw,bind)
> > /dev/shm on /usr/tmp type none (rw,bind)
> >
> > Never had a reboot fail for this reason.
> >
> > Sean
> >
> >
> > On Wed, Apr 10, 2002 at 10:23:43AM -0400, Geoffrey Gallaway wrote:
> > > I finally found the problem, which appears to be a combination of things:
> > >
> > > Multiple tmpfs mounts and SMP.
> > >
> > > I am using a Dual Intel PIII 1Ghz box. When I use a SMP kernel AND do
> > > multiple tmpfs mounts (mount --bind /dev/shm/etc /etc; mount --bind
> > > /dev/shm/var /var) the machine goes into a reset loop. HOWEVER, when I use a
> > > non-SMP kernel and still do multiple tmpfs mounts OR when I use a SMP kernel
> > > and do only one tmpfs mount, the machine boots fine. Every once in a while
> > > (1 out of 20 times?) the machine would boot fine with a SMP kernel and
> > > multiple tmpfs mounts. Is this a timing issue?
> > >
> > > If I can help to nail down this (apparent) bug more, please let me know.
> > >
> > > Thanks,
> > > Geoffeg
> > >
> > -
> > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> > the body of a message to majordomo@vger.kernel.org
> > More majordomo info at http://vger.kernel.org/majordomo-info.html
> > Please read the FAQ at http://www.tux.org/lkml/
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
>
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/