Re: Update on Promise 100TX2 + Serverworks IDE issues -- 2.2.20

> 
> On Tue, 2 Apr 2002 [e-mail] wrote:
> > 2. The MB IDE ports transfer data at about 18000K/sec while doing
> > cat /dev/hda >/dev/null and looking at vmstat.
> 
> I think the serverworks IDE is only mode4, not even UDMA33.  I heard a lot of
> bad things about it, and removed all the IDE drives from our serverworks
> system's controller.
> 
> > hdk.  In a 32-bit slot, cat /dev/hdx >/dev/null shows 31300K/sec.  But
> > doing cat /dev/hde4 (a specific partition) for example gives
> > 8400K/sec.  That makes no sense to me.
> 
> The outer cylinders of a drive are faster than the inner cylinders.  Try
> repartitioning the drive so that hde4 starts at cylinder 1, and see if that
> changes the speed.

That's not it because all 4 drives are partitioned the same, yet hde4
gives 8400K/sec and hdk4 gives 31000K.  Also there are the same number
of interrupts/sec and context switches per sec according to vmstat in
the 8400 and 31000 case.

> Maybe the promise cards and
> the serverworks IDE controller are just crappy hardware, and are never going
> to work correctly?

I certainly can relate to that!

Thanks for the feedback,
Jim