Re: USB-Storage in 2.4.19-pre

[Itai Nahshon]

On Friday 15 March 2002 01:26 am, Greg KH wrote:
> On Fri, Mar 15, 2002 at 01:20:49AM +0200, Itai Nahshon wrote:
> > No go. I still get that device not responding (error=-84).
> > If I understand your patch, disabling hotplug and loading
> > usb-storage manually shoud work. It isn't. Actually
> > I believe that it never got to call hotplug.
> > usbview does not see the device.
>
> No the main problem is that usbmodules starts talking to the device
> before it is initialized properly by the kernel driver, causing both
> programs to get messed up, and then the device is usually in a
> uninitialized state.
>
> > I forgot to say. On one of those computers where I do the testing
> > I have a USB mouse - which is working just fine.
>
> Does that mouse work if you plug it into the same port that you are
> plugging the drive into?  I have noticed a lot more errors from flaky
> hubs with the new code.
>
> thanks,
>
> greg k-h

That's on an ASUS CUV4X with 4 USB ports on the main board. Moving
things between ports do not make a difference - the mouse still works
and the disk does not. Perhaps the the flaky part i s the USB port in the
disk side. I could never make it work thru a hub - but then
it initialized correctly and failed only during data transfer.

I just put a scanner on he same system. The scanner is working OK
where the disk has failed.

Again, I do not see the disk usind usbview (or in /proc/bus/usb/devices)
so I believe the problem is more with detection than with initialization.

-- Itai