ok, here is a resubmit against pre2-ac4 for wafer5823wdt
diff -urN linux-2.4.19-pre2-ac4-orig/Documentation/Configure.help linux-2.4.19-pre2-ac4/Documentation/Configure.help
--- linux-2.4.19-pre2-ac4-orig/Documentation/Configure.help Sun Mar 10 16:30:02 2002
+++ linux-2.4.19-pre2-ac4/Documentation/Configure.help Sun Mar 10 16:44:36 2002
@@ -17897,6 +17897,17 @@
inserted in and removed from the running kernel whenever you want).
The module is called shwdt.o. If you want to compile it as a module,
say M here and read Documentation/modules.txt.
+
+Wafer 5823 Watchdog
+CONFIG_WAFER_WDT
+ This is a driver for the hardware watchdog on the ICP Wafer 5823
+ Single Board Computer (and probably other similar models).
+
+ This driver is also available as a module ( = code which can be
+ inserted in and removed from the running kernel whenever you want).
+ If you want to compile it as a module, say M here and read
+ <file:Documentation/modules.txt>. The module will be called
+ wafer5823wdt.o
Machine Check Exception
CONFIG_X86_MCE
diff -urN linux-2.4.19-pre2-ac4-orig/drivers/char/Config.in linux-2.4.19-pre2-ac4/drivers/char/Config.in
--- linux-2.4.19-pre2-ac4-orig/drivers/char/Config.in Sun Mar 10 16:30:03 2002
+++ linux-2.4.19-pre2-ac4/drivers/char/Config.in Sun Mar 10 16:38:41 2002
@@ -204,6 +204,7 @@
tristate ' W83877F (EMACS) Watchdog Timer' CONFIG_W83877F_WDT
tristate ' AMD "Elan" SC520 Watchdog Timer' CONFIG_SC520_WDT
tristate ' ZF MachZ Watchdog' CONFIG_MACHZ_WDT
+ tristate ' ICP ELectronics Wafer 5823 Watchdog' CONFIG_WAFER_WDT
if [ "$CONFIG_SGI_IP22" = "y" ]; then
dep_tristate ' Indy/I2 Hardware Watchdog' CONFIG_INDYDOG $CONFIG_SGI_IP22
fi
diff -urN linux-2.4.19-pre2-ac4-orig/drivers/char/Makefile linux-2.4.19-pre2-ac4/drivers/char/Makefile
--- linux-2.4.19-pre2-ac4-orig/drivers/char/Makefile Sun Mar 10 16:30:03 2002
+++ linux-2.4.19-pre2-ac4/drivers/char/Makefile Sun Mar 10 18:58:28 2002
@@ -252,6 +252,7 @@
obj-$(CONFIG_EUROTECH_WDT) += eurotechwdt.o
obj-$(CONFIG_INDYDOG) += indydog.o
obj-$(CONFIG_SC1200_WDT) += sc1200wdt.o
+obj-$(CONFIG_WAFER_WDT) += wafer5823wdt.o
obj-$(CONFIG_SOFT_WATCHDOG) += softdog.o
subdir-$(CONFIG_MWAVE) += mwave
diff -urN linux-2.4.19-pre2-ac4-orig/drivers/char/wafer5823wdt.c linux-2.4.19-pre2-ac4/drivers/char/wafer5823wdt.c
--- linux-2.4.19-pre2-ac4-orig/drivers/char/wafer5823wdt.c Thu Jan 1 01:00:00 1970
+++ linux-2.4.19-pre2-ac4/drivers/char/wafer5823wdt.c Sun Mar 10 16:46:46 2002
@@ -0,0 +1,250 @@
+/*
+ * ICP Wafer 5823 Single Board Computer WDT driver for Linux 2.4.x
+ * http://www.icpamerica.com/wafer_5823.php
+ * May also work on other similar models
+ *
+ * (c) Copyright 2002 Justin Cormack <justin@street-vision.com>
+ *
+ * Release 0.01
+ *
+ * Based on advantechwdt.c which is based on wdt.c.
+ * Original copyright messages:
+ *
+ * (c) Copyright 1996-1997 Alan Cox <alan@redhat.com>, All Rights Reserved.
+ * http://www.redhat.com
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * Neither Alan Cox nor CymruNet Ltd. admit liability nor provide
+ * warranty for any of this software. This material is provided
+ * "AS-IS" and at no charge.
+ *
+ * (c) Copyright 1995 Alan Cox <alan@lxorguk.ukuu.org.uk>
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/version.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/miscdevice.h>
+#include <linux/watchdog.h>
+#include <linux/slab.h>
+#include <linux/ioport.h>
+#include <linux/fcntl.h>
+#include <asm/io.h>
+#include <asm/uaccess.h>
+#include <asm/system.h>
+#include <linux/notifier.h>
+#include <linux/reboot.h>
+#include <linux/init.h>
+#include <linux/spinlock.h>
+#include <linux/smp_lock.h>
+
+static int wafwdt_is_open;
+static spinlock_t wafwdt_lock;
+
+/*
+ * You must set these - there is no sane way to probe for this board.
+ *
+ * To enable, write the timeout value in seconds (1 to 255) to I/O
+ * port WDT_START, then read the port to start the watchdog. To pat
+ * the dog, read port WDT_STOP to stop the timer, then read WDT_START
+ * to restart it again.
+ */
+
+#define WDT_START 0x443
+#define WDT_STOP 0x843
+
+#define WD_TIMO 60 /* 1 minute */
+
+/*
+ * Kernel methods.
+ */
+
+static void
+wafwdt_ping(void)
+{
+ /* pat watchdog */
+ spin_lock(&wafwdt_lock);
+ inb_p(WDT_STOP);
+ inb_p(WDT_START);
+ spin_unlock(&wafwdt_lock);
+}
+
+static void
+wafwdt_start(void)
+{
+ /* start up watchdog */
+ outb_p(WD_TIMO, WDT_START);
+ inb_p(WDT_START);
+}
+
+static void
+wafwdt_stop(void)
+{
+ /* stop watchdog */
+ inb_p(WDT_STOP);
+}
+
+static ssize_t
+wafwdt_write(struct file *file, const char *buf, size_t count, loff_t * ppos)
+{
+ /* Can't seek (pwrite) on this device */
+ if (ppos != &file->f_pos)
+ return -ESPIPE;
+
+ if (count) {
+ wafwdt_ping();
+ return 1;
+ }
+ return 0;
+}
+
+static ssize_t
+wafwdt_read(struct file *file, char *buf, size_t count, loff_t * ppos)
+{
+ return -EINVAL;
+}
+
+static int
+wafwdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
+ unsigned long arg)
+{
+ static struct watchdog_info ident = {
+ WDIOF_KEEPALIVEPING, 1, "Wafer 5823 WDT"
+ };
+
+ switch (cmd) {
+ case WDIOC_GETSUPPORT:
+ if (copy_to_user
+ ((struct watchdog_info *) arg, &ident, sizeof (ident)))
+ return -EFAULT;
+ break;
+
+ case WDIOC_GETSTATUS:
+ if (copy_to_user((int *) arg, &wafwdt_is_open, sizeof (int)))
+ return -EFAULT;
+ break;
+
+ case WDIOC_KEEPALIVE:
+ wafwdt_ping();
+ break;
+
+ default:
+ return -ENOTTY;
+ }
+ return 0;
+}
+
+static int
+wafwdt_open(struct inode *inode, struct file *file)
+{
+ switch (MINOR(inode->i_rdev)) {
+ case WATCHDOG_MINOR:
+ if (test_and_set_bit(0, &wafwdt_is_open))
+ return -EBUSY;
+ wafwdt_start();
+ return 0;
+ default:
+ return -ENODEV;
+ }
+}
+
+static int
+wafwdt_close(struct inode *inode, struct file *file)
+{
+ if (MINOR(inode->i_rdev) == WATCHDOG_MINOR) {
+#ifndef CONFIG_WATCHDOG_NOWAYOUT
+ if (test_and_clear_bit(0, &wafwdt_is_open))
+ wafwdt_stop();
+#else
+ wafwdt_is_open = 0;
+#endif
+ }
+ return 0;
+}
+
+/*
+ * Notifier for system down
+ */
+
+static int
+wafwdt_notify_sys(struct notifier_block *this, unsigned long code, void *unused)
+{
+ if (code == SYS_DOWN || code == SYS_HALT) {
+ /* Turn the WDT off */
+ wafwdt_stop();
+ }
+ return NOTIFY_DONE;
+}
+
+/*
+ * Kernel Interfaces
+ */
+
+static struct file_operations wafwdt_fops = {
+ owner:THIS_MODULE,
+ read:wafwdt_read,
+ write:wafwdt_write,
+ ioctl:wafwdt_ioctl,
+ open:wafwdt_open,
+ release:wafwdt_close,
+};
+
+static struct miscdevice wafwdt_miscdev = {
+ WATCHDOG_MINOR,
+ "watchdog",
+ &wafwdt_fops
+};
+
+/*
+ * The WDT needs to learn about soft shutdowns in order to
+ * turn the timebomb registers off.
+ */
+
+static struct notifier_block wafwdt_notifier = {
+ wafwdt_notify_sys,
+ NULL,
+ 0
+};
+
+static int __init
+wafwdt_init(void)
+{
+ printk
+ (KERN_INFO "WDT driver for Wafer 5823 single board computer initialising.\n");
+
+ spin_lock_init(&wafwdt_lock);
+ misc_register(&wafwdt_miscdev);
+#if WDT_START != WDT_STOP
+ request_region(WDT_STOP, 1, "Wafer 5823 WDT");
+#endif
+ request_region(WDT_START, 1, "Wafer 5823 WDT");
+ register_reboot_notifier(&wafwdt_notifier);
+ return 0;
+}
+
+static void __exit
+wafwdt_exit(void)
+{
+ misc_deregister(&wafwdt_miscdev);
+ unregister_reboot_notifier(&wafwdt_notifier);
+#if WDT_START != WDT_STOP
+ release_region(WDT_STOP, 1);
+#endif
+ release_region(WDT_START, 1);
+}
+
+module_init(wafwdt_init);
+module_exit(wafwdt_exit);
+
+MODULE_LICENSE("GPL");
+
+/* end of wafer5823wdt.c */
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/