>- MP 1.4 locks solid MP 1.1 is ok - that may be a Linux bug. I have a
> patch to test there
Same for me.
>- The onboard USB was removed and swapped for a plug in card wasting
> a slot (but you do get USB2 now). The manual wasn't updated
I replaced that ASUS USB 2.0 card with Adaptec Duo Connect (USB 2.0 / 1394).
Works just fine.
>- The disk led appears to be marked wrongly. If you wire it the
> board won't POST
Yeah. You should use another one under JEN jumper.
>- If you put a 33Mhz card in the 64bit slots the board won't POST
> unless you configure the board the way the manual suggests you don't
True. It should be Jumperless + DIP SW off/off/off/off.
>- Expect to want > 400W PSU if you have lots of disks. I ended up
> using a 550W PSU
I use EnerMax 430W. IBM 40GB + WD 10GB + HITACHI DVD + IOMEGA CDRW.
Works perfectly (with the patch from Linux-IDE folks, otherwise DMA doesn't
work).
>- Use a _BIG_ case. With anything but a large tower and actual
> case fans you are not going to get enough ventilation or cable
> room
I have minitower in-win case (with the case fan). And I'm very happy with it.
CPU and chipset temperatures are just fine (41C - 51C).
>Having said all that - when you figure through the mess that ASUS calls
>QA and documentation (and they should be firing people for shipping it in
>its current state quite frankly) it goes like a bat out of hell.
I was pretty happy with packaging.
And yes it's super fast and reliable.
Max
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/