RE: NIC lockup in 2.4.17 (SMP/APIC/Intel 82557)

[Robbert Kouprie]

I experienced the 10 Mbit half duplex problems too with this card, but
they seemed to have gone away after a bugfix from Alan Cox somewhere in
2.4. Somewhere later I upgraded to 100 Mbit full duplex and never
experienced problems again until 2.4.17.

I think im gonna try some older kernels and look through diffs if I have
time.

- Robbert

> -----Original Message-----
> From: Ben Greear [mailto:[e-mail]] 
> Sent: donderdag 31 januari 2002 18:54
> To: Robbert Kouprie
> Cc: [e-mail]
> Subject: Re: NIC lockup in 2.4.17 (SMP/APIC/Intel 82557)
> 
> 
> 
> 
> Robbert Kouprie wrote:
> 
> > The box is an Abit BP6 with Dual Celerons 433 and 192 Mb RAM. No
> > PCI-Riser cards. It is connected at 100 Mbit full duplex to a 100
> > Mbit switch. APIC is enabled. No kind of power management 
> is enabled.
> 
> 
> The only lockup problems I have run into are connecting some 
> eepro nics to
> a 10bt hub, and using (cheap arsed, it appears) PCI riser 
> cards.  I have
> heard of some SMP related issues, but nothing concrete, and I don't
> have any SMP systems personally.  You could try the e100, but I have
> no idea if it will be better or worse for your particular problem.
> 
> 
> -- 
> Ben Greear <[e-mail]>       <Ben_Greear AT excite.com>
> President of Candela Technologies Inc      http://www.candelatech.com
> ScryMUD:  http://scry.wanfear.com     http://scry.wanfear.com/~greear
> 
>