Execssive network errors 2.4.18pre (tx error or tx frame is busy)

rob2@rekl.dyn.dhs.org
Tue, 29 Jan 2002 19:41:09 -0600 (CST)


Hi. I've seen the following on both 2.4.18pre4 and 2.4.18pre7+preempt:
Lots & lots of these get warnings/errors get printed to the console and
syslog, and I don't know why. i586, eth0 is a natsemi at 10Mbs half
duplex, eth1 is a natsemi at 100Mbs full duplex, eth2 is an Orinoco silver
in adhoc mode. I didn't have this issue before I had 2.4.18pre4. I
haven't noticed anything not "working", except my syslog is getting filled
up.

More output, including .config and dmesg output is available at
http://rekl.yi.org/lk_help/

Please cc: me on replies, since I'm not subscribed. Thanks.

eth0: tx frame #1359 is busy.
eth0: tx frame #1359 is busy.
eth0: tx frame #1360 is busy.
eth2: Tx error, status 4 (FID=0192)
eth0: tx frame #1368 is busy.
eth0: tx frame #1370 is busy.
eth0: tx frame #1372 is busy.
eth2: Tx error, status 4 (FID=0156)
eth1: tx frame #3832 is busy.
eth2: Tx error, status 4 (FID=0156)
eth2: Tx error, status 4 (FID=01E2)
eth2: Tx error, status 4 (FID=0192)
eth1: tx frame #4105 is busy.
eth1: tx frame #4108 is busy.
eth1: tx frame #4115 is busy.
eth1: tx frame #4119 is busy.

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/