> hmmm ... maybe it is realy hardware depending ... with my
> relativly new motherboard and fast cpu/system componends
> it is no problem at all ...
> looking video, hearing music , ... no problems ...
I've played with lvcool on my box: Abit KT7A (KT133A), Athlon 1.1 GHz.
When I use my BT848 tv card to watch tv, there usually are some signs
that the PCI transfer rate is not high enough - some bits of image do
not get refreshed, but nothing major when lvcool is off.
But when running lvcool, the whole thing would look like a special
effects show: not even half the image would be refreshed every frame.
The BT848 writes directly over the PCI to AGP bridge to the video card
RAM so the CPU is completely idle. Thus it seems likely that the bus
performance is affected. ISTR that the actual 'disconnect' effect is
caused by a read from a south bridge register. I assume that read takes
a while, and this keeps the bus busy. This may not be a prblem in
itself, unless the PCU has the highest priority in the system, or has
the possibility to 'just do another cycle'.
However, with lvcool the CPU temperature dropped remarkably - from 20
degrees above case to 2 degrees above case.
But after updating the BIOS to version 3R, lvcool only results in a hard
crash. So now I found out how PCI latencies work, I have no change to
test. I can imagine that playing with the host bridge latencies will
solve this, just as it can improve on the video playing without lvcool.
That said, the 3R bios version does not support ACPI based disconnect at
all. But why lvcool wedges the system so well? Maybe some ACPI activity?
But then, my kernel was the same before and after the BIOS update.
Thomas
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/