RE: NIC lockup in 2.4.17 (SMP/APIC/Intel 82557)

[Robbert Kouprie]

Hi Kenny,

Thanks for the quick reply :) Just checked it, and it's in slot 2, so
that's not the problem. It doesn't share the HPT366 IRQ. This is my
/proc/interrupts:

radium:/$ cat /proc/interrupts 
           CPU0       CPU1       
  0:    1207342    1186359    IO-APIC-edge  timer
  1:          3          1    IO-APIC-edge  keyboard
  2:          0          0          XT-PIC  cascade
  4:         68         55    IO-APIC-edge  serial
  8:          2          0    IO-APIC-edge  rtc
 14:          6         12    IO-APIC-edge  ide0
 17:    1723020    1719230   IO-APIC-level  eth0
 18:      33419      33452   IO-APIC-level  ide2
 19:          0          0   IO-APIC-level  es1371
NMI:          0          0 
LOC:    2393677    2393676 
ERR:         14
MIS:          0

Regards,
- Robbert

> -----Original Message-----
> From: [e-mail] 
> [mailto:[e-mail]] On Behalf Of Kenneth MacDonald
> Sent: zondag 20 januari 2002 22:18
> To: Robbert Kouprie
> Subject: Re: NIC lockup in 2.4.17 (SMP/APIC/Intel 82557)
> 
> 
> Do you have the NIC in slot 3?  Read your motherboard manual, 
> page 1-4.
> 
> Hope that helps, just in case!
> -- 
> Kenny
> 
> ADML Support, EUCS, The University of Edinburgh, Scotland.
>