Re: Sharing Interrupt+HPT366 Problem on BP6

[Martin Eriksson]

----- Original Message -----
From: "Anton Tinchev" <[e-mail]>
To: "Linux Kernel" <[e-mail]>
Sent: Saturday, January 19, 2002 6:11 PM
Subject: Sharing Interrupt+HPT366 Problem on BP6

> There some problems with HPT366 maybe
>
> I used 3 disks for raid level 5
> 2 on the one of the channels
> 1 on the other channel
>
> Few second after starting raid (it start background recovery) the system
> locks totaly
> not even the Magic SysRq key works, only reset
>
> The HPT366 uses IRQ sharing (same IRQ on both chnnes)
>
> When i use only one channel, everiting is OK:
> 2 on the one of the channels
> 1 on the ordinary PIIX ide controler
>
> The configuration is:
> Abit BP6 MB
> Single Celeron 366 processor
> 1X10G hdd
> 3X60G hdd
> 256MB ram
> Davicom 100MB/s NIC
> S3 Trio3D AGP VGA
> Attached both dmesg:

<snip>

Have you tried the ATA patches from Andre Hedrick?

http://www.linuxdiskcert.org

Those cured all my HPT366 problems.

 _____________________________________________________
|  Martin Eriksson <[e-mail]>
|  MSc CSE student, department of Computing Science
|  Umeå University, Sweden

- ABIT BP6(RU) - 2xCeleron 400 - 128MB/PC100/C2 Acer
- Maxtor 10/5400/U33 HPT P/M - Seagate 6/5400/U33 HPT S/M
- 2xDE-530TX - 1xTulip - Linux 2.4.17+ide+preempt