1. hardware - m/b Intel L440GX
2. software - 2.4.18pre2aa2
...
SCSI disk error : host 1 channel 0 id 0 lun 0 return code = 8000002
Current sd08:41: sense key Aborted Command
Additional sense indicates Scsi parity error
I/O error: dev 08:41, sector 1776600
raid1: Disk failure on sde1, disabling device.
Operation continuing on 1 devices
md: recovery thread got woken up ...
md2: no spare disk to reconstruct array! -- continuing in degraded mode
md: recovery thread finished ...
3.
@samson:/proc/scsi$ cat scsi
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: IBM Model: DDYS-T36950M Rev: S80D
Type: Direct-Access ANSI SCSI revision: 03
Host: scsi0 Channel: 00 Id: 01 Lun: 00
Vendor: IBM Model: DDYS-T36950M Rev: S80D
Type: Direct-Access ANSI SCSI revision: 03
Host: scsi0 Channel: 00 Id: 02 Lun: 00
Vendor: IBM Model: DDYS-T36950M Rev: S80D
Type: Direct-Access ANSI SCSI revision: 03
Host: scsi0 Channel: 00 Id: 03 Lun: 00
Vendor: IBM Model: DDYS-T18350M Rev: S96H
Type: Direct-Access ANSI SCSI revision: 03
Host: scsi1 Channel: 00 Id: 00 Lun: 00
Vendor: IBM Model: DNES-318350W Rev: SAH0
Type: Direct-Access ANSI SCSI revision: 03
@samson:/proc/scsi$
4.
This is error disk or scsi cable?
Way not repeat try I/O ?
-- bye. Andrey Nekrasov, SpyLOG. - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/