Since about 2.4.9 I have not been able to burn CDs. I get the following
message in the logs. I have also noticed that the system becomes less
responsive when large applications, like netscape 6 or staroffice 5.2
load.
scsi : aborting command due to timeout : pid 10818, scsi0, channel 0, id 1, lun 0 Synchronize Cache 00 00 00 00 00 00 00 00 00
hdd: irq timeout: status=0xd0 { Busy }
hdd: DMA disabled
hdd: ATAPI reset complete
hdd: irq timeout: status=0xd0 { Busy }
hdd: ATAPI reset complete
hdd: irq timeout: status=0xd0 { Busy }
hdd: status timeout: status=0xd0 { Busy }
hdd: drive not ready for command
hdd: ATAPI reset complete
scsi0 : channel 0 target 1 lun 0 request sense failed, performing reset.
SCSI bus is being reset for host 0 channel 0.
scsi0 : channel 0 target 1 lun 0 request sense failed, performing reset.
My setup is as follows:
Hardware:
P III 650Mhz --- 256 MB --- P3B-F MB
NVidia Geforce DDR - AGP Video Card
IDE0 - Pri: HD - Sec: HD
IDE1 - Pri: CD-ROM - Sec: CRW6206A, ATAPI CD/DVD-ROM drive
Kernel:
2.4.17 compiled with gcc 3.0.2
EXT3 in-kernel
AGPGART module
NE2K-PCI in-kernel
IDE-SCSI in-kernel
EMU10K1 in-kernel
USB in-kernel
Software:
cdrecord 1.10
XFree86 4.1.0 running with the driver from NVidia and agpgart
I have a machine, P II 266 - 256MB with a similiar configuration
minus the XFree + NVidia, the sound, and the USB support and a
Hewlett-Packard CD-Writer Plus 8100 and it is burning perfectly.
Any ideas as to what could be wrong??
Thanks
ttyl
Dima
-- Dima Brodsky dima@cs.ubc.ca http://www.cs.ubc.ca/~dima 201-2366 Main Mall (604) 822-9156 (Office) Department of Computer Science (604) 822-2895 (DSG Lab) University of British Columbia, Canada (604) 822-5485 (FAX)"The price of reliability is the pursuit of the utmost simplicity. It is a price which the very rich find the most hard to pay." (Sir Antony Hoare, 1980)
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/